|
Media handling |
|
Printing material brightness |
|
92% per TAPPI 452 Test Method | |
|
Roll dimensions |
|
|
Printing material dry time |
|
Less than 3 minutes (@23ºC, 50% RH) | |
|
Media finish |
|
|
Printing material gloss level |
|
Matte per ASTM D-523 Test Method | |
|
Printing material lamination |
|
Hot lamination. Can be laminated with commercially available thermal or heat-assist pressure-sensitive laminate films. Visit HP's website for more information on lamination partners at: www.hp.com/go/designjet/supplies | |
|
Fade-resistance note (indoor commercial window) |
|
* Commercial Window: Interior in-window display ratings by HP Image Permanence Lab. HP predictions based on test data under Xenon-Arc illuminant – calculation assumes 6000 Lux/12 hr day. For details: http://www.hp.com/go/supplies/printpermanence. | |
|
Fade-resistance note (indoor home or office) |
|
** Indoor display permanence rating for interior displays/away from direct sunlight, under glass by HP Image Permanence Lab and/or by Wilhelm Imaging Research, Inc. For details: http://www.hp.com/go/supplies/printpermanence. | |
|
Fade-resistance (indoor home or office, dye ink) |
|
|
Fade-resistance (outdoor, dye ink) |
|
Not recommended without lamination | |
|
Fade-resistance (indoor commercial window, pigment ink) |
|
1+ years unlaminated Original HP 91 Vivera pigment inks* | |
|
Fade-resistance (indoor home or office, pigment ink) |
|
95+ years with HP 83 UV pigment inks** | |
|
Fade-resistance |
|
HP 5000 series UV indoor: estimated > 24 years, HP 5000 series UV commercial window: estimated 16 months, HP 5000 series UV outdoor conditions: estimated 2-3 months (real test), HP 5000 series dye indoor: estimated 10 months, HP CP series UV indoor: estimated > 34 years, HP CP series UV commercial window: estimated 18 months, HP CP series UV outdoor: estimated 2 to 3 months, HP CP series dye indoor: estimated 17 months, HP 800 and 500 series indoor: estimated 8 months | |
|
Opacity |
|
100% per TAPPI T-425 Test Method | |
|
Primary material |
|
|
Shelf life |
|
1 year at recommended temperature and humidity | |
|
Tear strength |
|
Greater than 55 N per ASTM D1004 | |
|
Tensile strength |
|
Greater than 900 N/mm per TAPPI 494 Test Method | |
|
Printing material thickness |
|
13.4 mil/340 microns per ISO 534 Test Method | |
|
Printing material waterfastness |
|
Water-resistant after 24 hours with UV inks, lamination required for dye inks | |
|
Print material weight |
|
460 g/m² per ISO 536 Test Method | |
|
Whiteness |
|
140 per CIE Ganz 82 Test Method | |
|
System |
|
Feature |
|
can be hem-stitched, suitable for metal grommets |
|
can be hem-stitched, suitable for metal grommets |
|
tensile strength warp greater than 1000 N/50mm DIN 53354 |
|
tensile strength warp greater than 1000 N/50mm DIN 53354 |
|
outdoor durability for a minimum of 1 month | |
My Account
