Keyword |
Part Number |
Description |
Airflow Guide | 677060-001 | Airflow baffle - Translucent plastic baffle that mounts behind the fan modules and over the top of the processor heat sinks and DIMM slots |
Bracket | 667263-001 | Support bracket with card guides - Supports the rear of the PCIe cards when installed on the system I/O board - Includes left and right support brackets |
Cable | 677067-001 | Mini-SAS cable, 390mm (15.4 inches) long - Connects between the hard drive backplane board and the integrated SAS controller on the system I/O board or PCI SAS controller board (for both the LFF and SFF hot-plug hard drive cages) |
Cable | 682626-001 | Mini-SAS cable, 560mm (22.0 inches) long - Connects between the hard drive backplane board and the integrated SAS controller on the system I/O board or PCI SAS controller board (for both the LFF and SFF hot-plug hard drive cages) |
Cable | 452334-001 | SATA optical drive / hard drive data cable - Straight connector to right angle connector, 450mm (17.7 inches) long |
Cage | 677054-001 | Multi-output power supply cage (backplane) assembly - For use with the 500 watt integrated power supply - Includes the cage assembly, connection board, and cables |
Cover | 667279-001 | Hard drive blank (cover) - To fill empty Large Form Factor (LFF) drive bays |
Cover | 707300-001 | Optical drive blank (cover) - To fill an empty optical drive bay |
Drive | 704637-001 | 256GB SATA Solid State Drive (SSD) - 2.5-inch form factor, 6Gb per second transfer Rate |
Fan | 732660-001 | 4056 fan module assembly - Non hot plug (NHP), dual, right |
Fan | 677059-001 | Dual rotor fan module assembly - Includes the fan module with latch and cable assembly |
Hardware Kit | 671354-001 | Hardware kit - Includes a power supply blank (cover), power cord clip, and fan module blank |
Heat Sink | 677055-001 | Screw-type processor heatsink - For processor socket 1 - Screws to studs on the system I/O board |
Heat Sink | 677056-001 | Screw-type processor heatsink - For processor socket 2 - Screws to studs on the system I/O board |
Memory (DIMM) | 664690-001 | 8GB, 1333MHz, PC3L-10600R-9, DDR3, dual-rank x4, 1.35V, registered dual in-line memory module (RDIMM) |
Panel | 683064-001 | Access panel - Top cover for the server |
PC Board | 677046-001 | System I/O board (motherboard) assembly - Includes the system I/O board, sub-pan tray, alcohol pad, and thermal grease |
Power Supply | 671797-001 | 500 watt multi-output integrated power supply - Comes standard with the server - Requires 100-120VAC or 200-240VAC at 50/60Hz - Mounts in the left rear corner of the server |
Processor | 683615-001 | Intel Six-Core 64-bit Xeon E5-2620 processor - 2.0GHz (Sandy Bridge-EP, 15MB Cache, Intel QPI Speed 7.2 GT/s, 95W TDP (Thermal Design Power), FCLGA (Flip-Chip Land Grid Array) 2011 socket)) |
Processor | 670523-001 | Intel Xeon E5-2670 Eight-Core 64-bit processor - 2.60GHz (Sandy Bridge-EP, 20MB Level-3 cache, Intel QuickPath interconnect (QPI) speed 8.0 GT/s, 115 watt thermal design power (TDP), FCLGA 2011-pin socket) |
Rack Mount Kit | 675040-001 | Rack mounting rail kit - For 1U server models - Includes left and right friction type slide rails (non-telescoping) - Cannot be used with the cable management arm |
Tool | 413965-001 | Torx tool - L-shaped wrench with T-15 and T-10 ends |
Tray | 712426-001 | Solid State Drive (SSD) tray assembly - Includes cables - For use with DL160 G8 |