Keyword |
Part Number |
Description |
Adapter | 701534-001 | HP FlexFabric 10Gb 2-port 533FLR-T - PCIe 2.0 bus interface, 2 x 10GBASE-T ports |
Airflow Guide | 696238-001 | Airflow baffle - Translucent plastic baffle that mounts behind the fan cage on top of the processor heat sinks |
Arm | 675043-001 | Cable management arm kit - Guides the power and interface cables to prevent binding when the server is slid in and out of the rack - Mounts to the rear of the rack |
Arm | 675606-001 | Cable management arm kit - Guides the power and interface cables to prevent binding when the server is slid in and out of the rack - Mounts to the rear of the rack |
Bezel | 675604-001 | Left bezel ear - With VGA port - For large form factor (LFF) |
Cable Kit | 696242-001 | Miscellaneous cable kit - Includes mini-SAS hard drive backplane cable, primary power cable with 2x4 connectors, secondary power cable with 2x4 connectors, and sideband fan cable |
Cage | 662526-001 | PCI riser cage - L-shaped metal structure that mounts towards the rear of the server - Capable of mounting two or three PCIe cards depending on which riser board is used (Does not include the riser board) |
Cage | 662537-001 | Processor cage assembly - Includes hardware components for the heatsink retaining bracket - Screws to system input-output (I/O)board |
Capacitor | 660093-001 | Capacitor pack with 914mm (36 inches) long cable - Provides back up power to the flash-based write cache (FBWC) memory module for up to 80 seconds in the event of a system power failure - For use with Smart Array controllers |
Cover | 667276-001 | Hard drive blank (cover) - To fill empty Small Form Factor (SFF) drive bays |
Cover | 670033-001 | Hard drive blank (cover) - To fill empty small form factor (SFF) drive bays |
Fan | 696241-001 | Hot-plug fan module assembly - Plugs in the front accessible fan cage assembly (six used) |
Hardware Kit | 662519-001 | Hardware blank kit - Includes the FlexibleLOM blank cover, PCIe riser cage blank cover, expansion slot blank cover, optical drive blank cover, and fan module blank |
Heat Sink | 662522-001 | Latch type heatsink assembly (standard efficiency) - Latches to the top of the processor with the heatsink retaining bracket (processor cage assembly) |
Memory (DIMM) | 735303-001 | 8GB, 1866MHz, PC3-14900R-13, DDR3, quad-rank x4, 1.50V, registered dual in-line memory module (DIMM) - Supported use with E5-2600 v2 series processors |
Memory (Product) | 731762-B21 | HP Z8GB 1Rx4 PC3-14900R-13 Memory Kit |
Memory Module | 633543-001 | 2GB flash backed write cache (FBWC) memory module, 72-bit wide - Does not include the controller board or capacitor module - For use with the P420, P421, P430, P431, and 822 Smart Array controllers |
Panel | 696239-001 | Access panel - Top cover for the server |
PC Board | 662524-001 | 3-slot PCIe riser board (standard) - Includes one x16 slot, and two x8 slots |
PC Board | 662528-001 | Power supply backplane board assembly |
Plastics Kit | 696243-001 | Plastics kit - Includes the FBWC capacitor pack cable routing guide, capacitor pack holder, and capacitor pack cable routing trough |
Power Cord | 142258-001 | AC power distribution unit (PDU) power cord (Black) - 250VAC, 16AWG, 2.0m (6.6ft) long - Includes IEC-320 C14 (M) connector to IEC 320 C13 (F) connector |
Power Cord | 416151-B21 | PDU power cord |
Power Cord | 538266-001 | Power cord (black) - 1.82m (6ft) long, 12A (Japan) |
Power Supply | 660185-001 | 1200 watt AC Common Slot (CS) 'Platinum Plus' hot-plug power supply - Installs in computer chassis as primary or redundant supply (94% efficiency) - Requires 100-240VAC at 50/60Hz - Multiple power supplies used in the sever must be the same model number |
Power Supply | 710708-001 | Power supply - Input voltage 12V, 1200 watts, Hot Plug (HP), redundant, 1U form factor |
Processor | 733833-001 | Intel Xeon E5-4640 v2 - 2.2GHz, 20MB smart cache, FCLGA2011 socket, hyper-threading technology with jacket |
Product | 657340-B21 | HP 1200 watts Power Supply |
Product | 663488-B21 | HP 2U Cable Management Arm Gen8 |
Product | 663481-B21 | HP 2U Rack Management Hardware - Large Form Factor Ball Bearings Gen8 |
Product | 656809-B21 | HP 36-inch Capping Module |
Product | 682284-B21 | HP DL380p Gen8 Heasink Kit |
Rail Kit | 692480-001 | Rack mounting rail kit - For 2U server models with Large Form Factor (LFF) drives - Includes left and right telescoping ball bearing type slide rails |
Tool | 413965-001 | Torx tool - L-shaped wrench with T-15 and T-10 ends |