| Keyword |
Part Number |
Description |
|---|
| Airflow Guide | 667256-001 | Airflow baffle assembly - Large translucent plastic baffle structure that mounts behind the fan cage and on top of the processor heat sinks |
| Airflow Guide | 667280-001 | PCI fan baffle set - Translucent plastic pieces that install over the PCI card slots in redundant fan configuration servers - Includes left and right baffles |
| Airflow Guide | 667257-001 | Power supply airflow baffle assembly - Assures proper airflow to the power supplies - Mounts just behind the front drive cages |
| Bezel | 667267-001 | 5U security locking bezel assembly for rack mounted servers - Covers the front of the server to protect from removing the hard drives or accessing the optical drive(s) |
| Bezel | 670945-001 | Left bezel ear assembly |
| Bezel | 667273-001 | Rack bezel - Front frame that surrounds the drive cages and front I/O assembly |
| Bracket | 667263-001 | Support bracket with card guides - Supports the rear of the PCIe cards when installed on the system I/O board - Includes left and right support brackets |
| Cable | 667259-001 | Drive power cable - Connects between the hard drive backplane board, optical (or other media) drive, and the system I/O board |
| Cable | 498424-001 | Mini-SAS cable - 36-position straight connector to straight connector, 648mm (25.5 inches) long |
| Cable | 667277-001 | Mini-SAS cable - 36-position straight connector to straight connector, 889mm (35 inches) long |
| Cable | 667265-001 | SATA cable - 90-degree connector to 90-degree connector, 305mm (12 inches) long - Connects between the optical (or other media) drive and the system I/O board |
| Cable Kit | 667266-001 | Miscellaneous cable kit - Includes Mini-SAS to Mini-SAS cable 324mm (12.75 inches) long, hard drive backplane power cable, and graphics card power cable (2x4) |
| Cage | 667255-001 | Fan cage assembly - Holds the four fan modules - Mounts in the bottom of the chassis between the hard drives and the system I/O board |
| Cage | 670612-001 | Second optical drive cage - Allows for the addition of a second and/or third optical drive in the server - Installs in one of the drive cage bays |
| Capacitor | 660093-001 | Capacitor pack with 914mm (36 inches) long cable - Provides back up power to the flash-based write cache (FBWC) memory module for up to 80 seconds in the event of a system power failure - For use with Smart Array controllers |
| Cover | 667270-001 | 2-bay power supply blank cover - Covers the unused 2-bay power supply slots in a 2-bay power supply server configuration |
| Cover | 667279-001 | Hard drive blank (cover) - To fill empty Large Form Factor (LFF) drive bays |
| Cover | 667276-001 | Hard drive blank (cover) - To fill empty Small Form Factor (SFF) drive bays |
| Cover | 670033-001 | Hard drive blank (cover) - To fill empty small form factor (SFF) drive bays |
| Cover | 667261-001 | Hard drive cage cover - Covers one of the drive cages (8-bay SFF / 6-bay LFF) when no drives are installed |
| Cover | 698883-001 | Power supply blank (cover) - To fill empty common slot power supply bays |
| Display | 667271-001 | Systems Insight Display (SID) assembly - Mounts in the upper right corner for tower configurations (upper left corner for rack configurations) - Includes cable |
| Fan | 792347-001 | Fan assembly with holder |
| Fan | 667254-001 | Fan module assembly - 92mm x 92mm (3.62 inches x 3.62 inches) - Includes latch - Three used with single processor, four used with redundant fan configuration or dual processors |
| Fan/Airflow Guide | 667258-001 | Fan louver assembly - One is inserted in each fan bay when configuring a hot-plug redundant fan system |
| Filler | 667262-001 | Fan cage blank (filler) - Occupies slot one in the fan cage when the second processor is not installed |
| Foot | 667264-001 | Tower feet - Snap-locks on to the bottom of the tower - Includes two feet |
| Hardware Kit | 536390-001 | Hardware and plastics kit - Includes slimline hard disk drive blank, rear I/O bracket (1U height), fixed PSU Bracket, and various Torx screws |
| Hardware Kit | 809955-001 | Miscellaneous hardware kit - Includes air blocker for PCIe expansion slots 5-7, air blocker for front 2-drive cage backplane, chassis retention bracket, fan blank, LFF drive blank, SFF drive blank, cable management holder, and FlexibleLOM blank |
| Heat Sink | 667268-001 | Latch type heatsink assembly - Latches to the top of the processor with the heatsink retaining latch on the system I/O board |
| Holder | 792348-001 | Fan holder - For use with ML150 Gen9 |
| Memory (DIMM) | 664690-001 | 8GB, 1333MHz, PC3L-10600R-9, DDR3, dual-rank x4, 1.35V, registered dual in-line memory module (RDIMM) |
| Memory (DIMM) | 664691-001 | 8GB, 1600MHz, PC3-12800R-11, DDR3, single-rank x4, 1.50V, registered dual in-line memory module (DIMM) |
| Memory (DIMM) | 735303-001 | 8GB, 1866MHz, PC3-14900R-13, DDR3, quad-rank x4, 1.50V, registered dual in-line memory module (DIMM) - Supported use with E5-2600 v2 series processors |
| Memory Module | 633542-001 | 1GB flash backed write cache (FBWC) memory module, 72-bit wide - Does not include the controller board or capacitor module - For use with the P420 and P421 Smart Array controllers |
| Memory Module | 633543-001 | 2GB flash backed write cache (FBWC) memory module, 72-bit wide - Does not include the controller board or capacitor module - For use with the P420, P421, P430, P431, and 822 Smart Array controllers |
| Memory Module | 633540-001 | 512MB flash backed write cache (FBWC) memory module, 40-bit wide - Does not include the controller board or capacitor module - For use with the P222 Smart Array controller |
| Module | 667260-001 | Front I/O module assembly - Includes the four front USB connectors, power switch, status LEDs, and associated cables - Mounts on the front between the drive cages |
| Mouse | 605162-001 | HP USB optical mouse (BFR-PVC free) |
| Mouse | 674316-001 | HP wireless USB scroll mouse |
| PC Board | 667269-001 | 2-bay power supply backplane board - Mounts on top of the 2-bay power supply cage (under the system I/O board) |
| PC Board | 693610-001 | 8-bay small form factor (SFF) hard drive backplane board with SAS expander - Allows up to 24 SFF drives to be managed under one single controller |
| PC Board | 667275-001 | 8-bay small form factor (SFF) hot-plug hard drive backplane board |
| PC Board | 667253-001 | System I/O board (motherboard) - Includes subpan |
| Power Cord | 142258-001 | AC power distribution unit (PDU) power cord (Black) - 250VAC, 16AWG, 2.0m (6.6ft) long - Includes IEC-320 C14 (M) connector to IEC 320 C13 (F) connector |
| Power Cord | 142258-002 | AC power distribution unit (PDU) power cord (Black) - 250VAC, 16AWG, 2.5m (8.2ft) long - Includes IEC-320 C14 (M) connector to IEC 320 C13 (F) connector |
| Power Cord | 416151-AB1 | Power cord - 1.82m (6ft) long |
| Power Cord | 491683-AA1 | Power cord (Black) - 3-wire, 1.83m (6ft) long (China) |
| Power Supply | 511777-001 | 460 watt AC Common Slot (CS) 'Gold' hot-plug power supply - Installs in the computer chassis as primary or redundant supply (92% efficiency) - Requires 100-240VAC at 50/60Hz |
| Processor | 730240-001 | Intel Xeon E5-2630 v2 Six-Core 64-bit processor - 2.60GHz (Ivy Bridge-EP, 15MB Level-3 cache, Intel QuickPath interconnect (QPI) speed 7.2 GT/s, 80W thermal design power (TDP), socket FCLGA 2011) |
| Rack Mount Kit | 667274-001 | Rack bezel ear kit - Includes the left and right rack ears with release levers, the discovery service cable (for the left rack ear), and two server base blank covers |
| Rail Kit | 667272-001 | 3U to 7U high rack mounting rail kit - Includes the left and right rails, and cable management arm |
| Switch | 410530-001 | Server switch 2X1X16, IP console, USB/Virtual Media (VM) |
| Tool | 413965-001 | Torx tool - L-shaped wrench with T-15 and T-10 ends |