Keyword |
Part Number |
Description |
Belt | A4845-67011 | Theta belt assembly - Provides arm rotation - Theta Bbelt assembly - Provides arm rotation - Includes clip |
Belt | A4845-67009 | Z belt - Provides vertical movement for the picker (Hand) assembly |
Cable | A5606-67004 | 9840 drive power cable assembly - Includes a 24-pin (F) connector marked P2 and a 24-pin (F) connector marked P53 - 16.2cm (6.4in) long - From power supply to drive |
Cable | STK-3102998XX | Cable assembly - DLT DC power cable - Located in the drive enclosure |
Cable | A4845-67016 | Cartridge access port (CAP) and main door interlock cable assembly - From system library controller board (PRC) to vertical transport PRY board |
Cable | STK-310283002 | DC bus/fans cable assembly - Connects the fans to the power supply |
Cable | A4845-67024 | DLT 4000 SCSI ID cable - Located in the drive enclosure |
Cable | STK-313114803 | DLT 7000 SCSI ID cable assembly |
Cable | A4845-67023 | DLT SCSI 68-50 pin jumper for DLT 4000 cable assembly - Has 68 pin high density (F) external connectors on each end and a 50 pin (F) internal connector in the middle of the cable - 0.4m (1.4ft) long |
Cable | A4845-67012 | Flex cable assembly - Z-Flex cable assembly - From vertical transport (Z column) to tape cartridge picker (hand) |
Cable | STK-310284601 | Internal power cable assembly |
Cable | STK-3102979XX | Proximity switch cable assembly |
Cable | A4845-67018 | Ribbon cable assembly - From control (operator) panel to system library controller board (PRC) |
Cable | STK-310289602 | Robotics signal and power cable assembly - Provides control signals and DC voltage to the vertical transport assembly (Z column) and picker (Hand) assemblies |
Cable | A4845-67022 | SCSI extension cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (F) - 1.2m (4.0ft) long |
Cable | A5606-67003 | SCSI ID cable - For 9840 DLT drive |
Cable | STK-313113101 | SCSI ribbon cable - Has an internal 68-pin (M) connector marked `J3`, an external 68-pin (F) connector marked `J1`, and an external 68-pin (F) connector marked `J2` - 71.1cm (16.2in) long - From DLT 7000 rear panel to system library controller board |
Cable | STK-310283604 | Standard host serial port cable assembly - Connects from the system library controller board (PRC) to the I/O tower |
Cable | STK-310255301 | Tape transport interface cable assembly - Connects from the system library controller board (PRC) to the drives |
Cable | STK-310283505 | Tape transport interface cable assembly - Connects from the system library controller board (PRC) to the drives |
Cable (Interface) | 413298-001 | SCSI interface cable with thumbscrews on both ends - 68-pin very high density (M) to 68-pin high density (M) - 90 ohms - 10.0m (33ft) long |
Cable (Interface) | 413296-001 | SCSI interface cable with thumbscrews on both ends - 68-pin very high density (M) to 68-pin high density (M) - 90 ohms - 2.5m (8.2ft) long |
Cable (Interface) | 413297-001 | SCSI interface cable with thumbscrews on both ends - 68-pin very high density (M) to 68-pin high density (M) - 90 ohms - 5.0m (16ft) long |
Cable (Interface) | 5012-8337 | SCSI interface cable with thumbscrews on both ends - 68-pin very high density (M) to 68-pin high density (M), 90 ohms, 1.0m (3.3ft) long |
Cable (Interface) | A3639-63011 | SCSI interface cable with thumbscrews on ends - Low profile 68-pin high density (M) to low profile 68-pin high density (M) - 90 ohms - 1.0m (3.3ft) long - (A3401A Option 806, A4852A Option 806, A4854A Option 806) |
Cable (Interface) | A3639-63014 | SCSI interface cable with thumbscrews on ends - Low profile 68-pin high density (M) to low profile 68-pin high density (M) - 90 ohms - 10.0m (33ft) long - (A3401A Option 809, A4852A Option 809, A4854A Option 809) |
Cable (Interface) | A3639-63012 | SCSI interface cable with thumbscrews on ends - Low profile 68-pin high density (M) to low profile 68-pin high density (M) - 90 ohms - 2.5m (8.2ft) long - (A3401A Option 807, A4852A Option 807, A4854A Option 807) |
Cable (Interface) | A3639-63013 | SCSI interface cable with thumbscrews on ends - Low profile 68-pin high density (M) to low profile 68-pin high density (M) - 90 ohms - 5.0m (16ft) long - (A3401A Option 808, A4852A Option 808, A4854A Option 808) |
Cable (Interface) | STK-310284902 | Tape transport interface cable assembly |
Cable Kit | A4845-67021 | Cable kit - Includes two DB-9 (F) to RJ-45 (F) connectors and a cable with RJ-45 (M) connectors on both ends - 3.0m (9.8ft) long - PC to Library Adaptor |
Coil | STK-310264302 | Theta coil assembly - Attaches to the theta motor |
Control Panel | STK-3000368XX | Control (operator) panel and display assembly - Does not include cable |
Cover | STK-310269703 | Drive cover |
Cover | STK-300031801 | I/O cover assembly |
Cover | STK-300031301 | Left rear cover panel assembly |
Cover | STK-300031401 | Universal cover assembly |
Door | STK-313623701 | CAP (Cartridge access port) door assembly - Cartridges are inserted and removed through this door |
Door | STK-300032201 | Left front door assembly |
Door | STK-300031501 | Right front door - Does NOT include hardware |
Door | STK-300031602 | Right front door assembly - Includes compression latch, proximity switch magnate, EMI seal foam clad, door stripe, model number plate, and logo retainer |
Drive | A5606-69001 | 20GB HP9840 tape drive mechanism - (A5598A, A5606A) |
Drive | A5606A | 9840 tape drive assembly for 10/588 |
Drive | A4845-69019 | DLT 4000 tape drive mechanism - (A4844A, A4847A) |
Drive | A4845-69020 | DLT 7000 tape drive mechanism - (A4848A, A4867A) |
Drive (Product) | A4847A | DLT 4000 drive kit - Includes one DLT 4000 drive and tray assembly, 48in (1.22m) SCSI extender cable, installation guide, and manual - DLT 4000 drive kit for 1 to 10 drives |
Drive (Product) | A4848AR | DLT 7000 drive kit - Includes one DLT 7000 drive and tray assembly, 1.22m (48in) SCSI extender cable, installation guide, and manual |
Expansion Kit | STK-310279601 | Expansion kit - Lower hinge |
Expansion Kit | STK-310279501 | Expansion kit - Upper hinge |
Fan | A4845-67015 | Dual fan assembly |
Key | A4845-67002 | Key for A4845A and A4846A DLT library systems |
Label Kit | Q2004A | DLTtape IV bar code labels - Package of 100 data cartridge labels and 10 cleaning labels |
Latch | STK-310276914 | CAP (Cartridge Access Port) latch assembly |
Leveling Pad | STK-307505603 | Wedge/leveler assembly - Placed under the casters to assist in leveling the DLT library system |
Magazine | STK-308286604 | Standard magazine assembly - Holds 14 DLT cartridges |
Manual | A4845-90008 | A4845A DLT library diagnostic guide |
Manual | A4845-90000 | A4845A DLT library hardware operators guide |
Manual | A4845-90007 | A4845A DLT library installation manual |
Manual | A4845-90006 | A4845A DLT library service manual |
Motor | STK-3000393XX | DC motor (Z and Theta) - Used in the vertical transport assembly (Z column assembly) - Two used |
PC Board | STK-3000386XX | Drive communication assembly (PRM) for 7 to 10 drives - Drive Communication Assembly (PRM) - For Systems that Have 7-10 Drives Installed |
PC Board | STK-310205302 | Robotics assy. PRY PCA |
PC Board | A4845-69004 | System library controller (PRC) board - System Library Controller Board (PRC) |
PC Board | STK-310204201 | Vertical transport (Z column assembly) PRX board - Controls X axis movement |
PC Board (Interface) | A4845-69003 | Narrow single-ended or 8 bit differential SCSI board - Includes the bracket - Narrow - Single-Ended or Eight-Bit Differential SCSI Board - Mounts on the System Library Controller board (PRC) - Includes the Bracket |
PC Board (Interface) | A4845-69007 | Wide single-ended or 8 bit differential SCSI board - Includes the bracket - Wide - Single-Ended or Eight-Bit Differential SCSI Board - Mounts on the System Library Controller board (PRC) - Includes the Bracket |
PDU | STK-3102914XX | Power distribution unit (PDU) - Used only on systems that have 7 to 10 drives installed |
Picker Assembly | A4845-69013 | Tape cartridge picker (hand) assembly - Cartridge holding mechanism - Transports cartridges between the storage slots and the DLT drives |
Power Cord | 8120-6899 | Power cord - Has CEE 7/7 (M) plug for power input and C19 (F) plug for power output - 4.5m (14.8ft) long (for most European countries, Korea, Indonesia, Portugal, Germany, Spain, France, Italy and Arabic countries) - (E7809A) |
Power Cord | 8120-6894 | Power cord (Black) - 12 AWG, 20A, 4.5m (14.8ft) long - Has NEMA 5-20P (M) plug for power input, and straight (F) C19 receptacle for power output (for 120V in the United States, Canada, Thailand, Philippines, and Japan) |
Power Cord | 8120-6893 | Power cord (Black) - 12 AWG, 4.5m (14.8ft) long - Has L6-20P (M) plug for power input, and straight (F) C19 receptacle for power output (for 240V in the USA and Canada) |
Power Cord | 8120-6903 | Power cord (Black) - 12 AWG, three conductor, 4.5m (14.8ft) long - Has NEMA L6-20P locking-type (M) plug and IEC C19 straight (F) receptacle (For 220-250VAC in the United States, Canada, and Japan) - (Feller and Neumayer L6/20-SJT3X12AWG-C19/4.5M) - (E7803A) |
Power Cord | 8120-6900 | Power cord (Black) - 15 AWG, 4.5m (14.8ft) long - Has AS-3112 (M) for power input and straight (F) C19 receptacle (for 240V in Australia and China) |
Power Cord | 8120-6897 | Power cord (Black) - 15 AWG, three conductor, 4.5m (14.8ft) long - Has IEC-309 (M) plug for power input and straight (F) C19 receptacle (For 220VAC in Denmark and Switzerland) - (E7808A) |
Power Cord | 8120-6896 | Power cord (Black) - 3-wire, 15 AWG, 4.5m (14.8ft) long - Has AS-3112 (M) for power input and straight (F) C19 receptacle (for 240V in South Africa and India) |
Power Cord | 8120-6898 | Power cord (Black) - 3-wire, 15 AWG, 4.5m (14.8ft) long - Has straight (F) C19 receptacle (240V for Singapore, Arabic countries and United Kingdom) |
Power Supply | A4845-69017 | Power supply - 43VDC - For up to six drives |
Power Supply | STK-3036880XX | Power supply for the HP9840 drive - Supplies +5VDC and +12VDC - 50 watts - Mounts inside the back of the drive enclosure |
Power Supply | A4845-67201 | Power supply, +5VDC and +12VDC output, 50 watts - For the DLT 7000, DLT 8000, and LTO drives - Mounts inside the back of the drive enclosure |
Product | A4848A | DLT 7000 drive kit - Includes one DLT 7000 drive and tray assembly, 1.22m (48in) SCSI extender cable, installation guide, and manual |
Rail | STK-310269901 | Drive rail assembly |
Repair Kit | STK-309172301 | DLT leader repair kit for DLT 4000, DLT 7000, and DLT 8000 - Only trained CEs should use this kit |
Software | A4845-67006 | A4845 and A4846A microcode floppy - Rev 1.7 |
Tape Cartridge | C5141-60010 | DLT type IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
Tape Cartridge | C5141A | DLTtape IIIXT tape cartridge - 15GB native capacity |
Tape Cartridge | C5141L | DLTtape IV pre-labeled tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Includes bar code label |
Tape Cartridge | C5141FL | DLTtape IV pre-labeled tape cartridges - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Includes bar code labels - Package of 20 pre-labeled tapes |
Tape Cartridge | 295194-B21 | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
Tape Cartridge | 217861-B21 | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of 21 tapes |
Tape Cartridge | 217862-B22 | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of 315 tapes |
Tape Cartridge | 295192-B21 | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of seven tapes |
Tie-Wrap | STK-10075150 | Push mount cable tie-wrap |
Tray | STK-310252301 | DLT multi-drive tray - Used when multiple drives are installed |