Keyword |
Part Number |
Description |
Bumper | 0403-0780 | Door bumper (self-adhesive) - On cabinet rear door (two used) |
Cable (Interface) | 1005-0586 | Fiber-optic short wave multimode interface cable - 50um core, 125um cladding - SC connectors - 16m (52ft) long - (A3531A, A5645A, A5750A Option 001) |
Cable (Interface) | C7200-60147 | SCSI interface cable with ferrites and thumbscrews on both ends - Has a high density 68-pin (M) connector and a right angle high density 68-pin (M) connector - 30cm (11.8-in) long - Used as external daisy chain cable |
Cable (Interface) | C6282-61607 | SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 4.0m (13ft) long |
Cable Kit | C7219-60140 | Cable kit - Includes magazine lock harness cable, 2 online drive repair SCSI loop cables (LVDS and HVDS), power switch cable, display cable, multi-level interconnect cable, and rear panel hard drive connector plate with ribbon cable |
Caster | 1492-0310 | Wheel and caster assembly - 3in diameter |
Connector | 1251-7116 | Connector with hole for mounting - Used with the door grounding cable assembly |
Conversion Kit | A4687A | DLT 8000 Low Voltage Differential (LVD) SCSI to fiber channel conversion kit - One kit is required for every two LVD drives |
Conversion Kit | A4687AR | DLT 8000 Low Voltage Differential (LVD) SCSI to fiber channel conversion kit - One kit is required for every two LVD drives |
Cover | C7200-00201 | Bottom cover |
Cover | J1500-60009 | Front panel (also known as forehead) - Installed to top front of unit - Contains the HP logo |
Cover | 5183-1868 | Large side panel (Quartz Gray) - Nine EIA high |
Cover | J1506A | Side cover kit for Rack System/E41 Cabinet - Includes eight 8U panels and two 9U panels - Panels are snap on/off molded plastic |
Cover | 5183-1867 | Small side panel (Quartz Gray) - Eight EIA high |
Cover | 5064-6104 | Vented top cover for rack - Quartz Gray |
Display | C7200-60122 | Front panel display board assembly - Does not include viewing window assembly |
Door | C7200-60050 | Door and key assembly - Installed over magazine tray/slide assembly - Two of these are required for each level |
Door | 5064-5105 | Perforated rear door - Used for Rack Systems/E41 only - Quartz Gray |
Drive | C7200-69202 | 40/80GB DLT 8000 Low Voltage Differential (LVD) SCSI drive module |
Drive (Product) | C7237N | 40/80GB DLT 8000 Low Voltage Differential (LVD) SCSI drive module |
Drive (Product) | C7237NR | 40/80GB DLT 8000 Low Voltage Differential (LVD) SCSI drive module |
Drive (Product) | A4686A | SureStore E DLT 8000 40/80GB Low Voltage Differential (LVD) SCSI drive module |
Drive (Product) | A4686AR | SureStore E DLT 8000 40/80GB Low Voltage Differential (LVD) SCSI drive module |
Fan | C7200-68500 | Fan assembly - Includes cable |
Foot | A5540A | Anti-tip feet for Rack System/E - Includes a front foot and a rear foot which can be extended from the cabinet |
Hardware Kit | J1522A | Hardware kit for equipment racks - Includes ten decorative mounting screws, ten T25 Torx non-decorative mounting screws, and 20 sheet metal nuts |
Hinge | 5183-1900 | Hinge for rear door |
Hook | J1521A | Lifting hooks for Rack System/E or Rack System/U - Package of four hooks |
Label Kit | Q2004A | DLTtape IV bar code labels - Package of 100 data cartridge labels and 10 cleaning labels |
Latch | 1390-1209 | Rear door latch and lock assembly - Includes retaining bracket and two keys - Flush mounting, keylocking slam latch, pawl on right/left of latch - 92mm long, 42mm wide, gray plastic - 3/16in max panel thickness |
Lifter | C9170-60050 | Lift assembly - Includes jack and handwheel - Installed in bottom of cabinet |
Lifter | C7219-60024 | Vertical lift assembly |
Lock | C7200-60043 | Left magazine lock assembly |
Lock | C7200-60042 | Right magazine lock assembly |
Magazine | C7236J | Removable 5 slot DLT magazine - Contains five DLT type IV tape cartridges |
Magazine | C7235J | Removable 5 slot DLT magazine - Contains no media |
Magazine | C7200-60045 | Removable five slot DLT magazine - Contains no media - (C7235J) |
Panel | 5183-1865 | 1 EIA filler panel (Quartz Gray) - For Rack System/E or Rack System/U |
Panel | C7200-00205 | Blank drive filler panel - Installed over empty drive slot |
Panel | C7200-00612 | Blank I/O filler panel - Installed over empty PC board slot |
Panel | C9170-60060 | Lift assembly cover panel (Gray) - Installed at bottom front of cabinet |
PC Board | C9170-60004 | Library expansion PC board - Library Expansion PC Board - Installed in Level 5 Only |
PC Board | C7200-60000 | Main PC board (Motherboard) |
PC Board | C7219-60003 | Slave controller PC board |
PC Board (Interface) | C7200-69016 | Fiber channel interface PC board (Standard Performance) - Low Voltage Differential SCSI (LVDS) |
PC Board (Interface) | C7200-69206 | Library interface controller PC board - Low Voltage Differential SCSI (LVDS) |
PC Board (Interface) | C7200-60110 | Remote management card (RMC) - 10Base-T PC board |
PDU | E7676-63001 | 16A power distribution unit (PDU) - Has one C20 (M) for power input, ten C13 (F) outlets - For 100-240V - (E7676A) |
Picker Assembly | C7200-69127 | Picker and transport assembly |
Power Cord | 8120-1575 | Daisy-chain power cord (Jade Gray) - 18AWG, 76cm (30in) long - Has (M) C14 plug for power input and (F) C13 plug for power output |
Power Cord | E7805A | PDU power cord - Has L6-30P (M) plug for power input and C19 (F) plug for PDU power output - 4.5m (14.8ft) long |
Power Cord | E7806A | Power cord - 4.5m (14.8ft) long - Has a stripped end for power input and a straight C19 (F) receptacle for power output |
Power Cord | E7809A | Power cord - Has CEE 7/7 (M) plug for power input and C19 (F) plug for power output - 4.5m (14.8ft) long |
Power Cord | 8120-8351 | Power cord (Black) - 12 AWG, 2.4m (8.0ft) long - Has (M) L6-30P plug for power input, and straight (F) C19 receptacle for power output - (E7799A) |
Power Cord | 8120-6903 | Power cord (Black) - 12 AWG, three conductor, 4.5m (14.8ft) long - Has NEMA L6-20P locking-type (M) plug and IEC C19 straight (F) receptacle (For 220-250VAC in the United States, Canada, and Japan) - (Feller and Neumayer L6/20-SJT3X12AWG-C19/4.5M) - (E7803A) |
Power Cord | E7808A | Power cord (Black) - 15 AWG, 4.5m (14.8ft) long - Has IEC-309 (M) plug for power input and straight (F) C19 receptacle (for 220V in Denmark and Switzerland) |
Power Cord | E7803A | Power cord (Black) - 15 AWG, 4.5m (14.8ft) long - Has NEMA L6-20P (M) plug for power input and (F) C19 receptacle for power output (for the United States, Canada, and Japan) |
Power Supply | C7200-60032 | Non-redundant power supply module - NOTE: The power supplies in a library must be either all standard or all redundant - (A4675A, A4677A) |
Power Supply | C9170-60033 | Redundant power supply module |
Power Supply Kit | A4667A | Redundant power supply kit for DLT libraries - Includes one chassis and two plug-in power supply modules - One kit required for every 20 slots |
Rail Kit | C7219-60046 | Gear rail kit - Includes gear rails with and without stops |
Software | C7200-60012 | DLT 8000 FUP tape - A DLT 8000 tape with drive firmware and a download utility |
Solenoid | C7200-60041 | Mail slot solenoid assembly - Includes cable |
Strap | C7200-84451 | Large lifting strap/sling - Installed near the middle |
Strap | C7200-84450 | Small lifting strap - Installed near the front and the back |
Striker | 5183-6301 | Striker (Latch catch) for rear door |
Tape Cartridge | 199704-001 | DLT cleaning cartridge - Not for DLT 1 or DLT VS |
Tape Cartridge | C5142-60010 | DLT cleaning cartridge - Not for DLT 1 or DLT VS |
Tape Cartridge | C5142A | DLT cleaning cartridge - Not for DLT 1 or DLT VS |
Tape Cartridge | C5141-60010 | DLT type IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
Tape Cartridge | C5141A | DLTtape IIIXT tape cartridge - 15GB native capacity |
Tape Cartridge | C5141-85700 | DLTtape IIIXT tape cartridge - 15GB native capacity - (C5141A) |
Tape Cartridge | C5141L | DLTtape IV pre-labeled tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Includes bar code label |
Tape Cartridge | C5141FL | DLTtape IV pre-labeled tape cartridges - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Includes bar code labels - Package of 20 pre-labeled tapes |
Tape Cartridge | 295194-B21 | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
Tape Cartridge | 9164-0723 | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
Tape Cartridge | 217861-B21 | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of 21 tapes |
Tape Cartridge | 217862-B22 | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of 315 tapes |
Tape Cartridge | 295192-B21 | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of seven tapes |
Terminator | 1253-3295 | Low Voltage Differential (LVD) SCSI terminator - Has 68 pin high density (M) connector with thumbscrews |
Terminator | 490348-001 | Low Voltage Differential (LVD) SCSI terminator - Has 68-pin high density (M) connector with thumbscrews |
Tie Kit | J1512B | Tie kit for Rack System - Used to attach two E41 or U41 cabinets together |
Transceiver | 1005-0478 | 850nm optical Gigabit Interface Converter (GBIC) plug-in module - Requires fiber optic interface |
Tray | C7200-60044 | Magazine tray/slide assembly - Does not include door - 2 used for each level |
Trim | C7231-60052 | Chin - Trim piece installed on bottom front of each level |
Unknown Keyword | 8120-6357 | Power cord (Black) - 15 AWG, 2.5m (8.2ft) long - Has un-terminated (M) end for direct connection or customer installed plug for power input, and straight (F) C19 receptacle for power output (for International use) - For the computer |
Unknown Keyword | 8120-6362 | Power cord (Black) - 2.5m (8.2ft) long - Has (M) NEMA L6-20P plug for power input, and (F) C19 receptacle for power output (for 120V in the United States, Canada, Thailand, Philippines and Japan) - For the computer |
Unknown Keyword | 2680-0305 | SCREW-MACH 10-24 .625-IN |
Upgrade Kit | A6359A | Capacity upgrade for DLT Library - Adds 20 tape slots |
Window | C7200-60051 | Viewing windows kit - One window covers display assembly and others fill blank area between the magazine tray doors |