Keyword |
Part Number |
Description |
Adapter (Product) | 508226-B21 | HP Smart Array P700m/512 4-ports Ext PCIe x8 SAS Controller |
Battery | 452348-B21 | HP Smart Array P-series Low Profile Battery |
Battery | 453779-001 | Smart Array P700m battery - 4.8VAC, low profile |
Bezel | 230997-001 | Front bezel - For rack mounted configuration |
Bracket | 433718-B21 | HP BLc7000 10000 Series Rack Shipping Bracket Option |
Bracket | 252641-001 | Power distribution unit (PDU) bracket assembly - Includes module retention bracket, single and double check brackets, and 1U form factor mamangement core left and right brackets |
Cable | 491025-001 | Cable - Fiber Channel (FC), LC/LC, 2m (6.56ft) long, multi-mode, OM3 50/125 UM, 10GB |
Cable | 416003-001 | HP c-Class blade SUV cable - Performs server blade administration, configuration and diagnostic procedures |
Cable | 419595-001 | HP fixed cord Power Distribution Unit (PDU) cable - 0.3m (1ft) long |
Cable | 409124-001 | Smart Array P400 controller battery cable assembly - 28AWG, 16-pin - 292mm (11.5 inches) long - Connects between the battery pack and the memory module |
Cable | 409125-001 | Smart Array P400 controller battery cable assembly - 28AWG, 16-pin - 610mm (24 inches) long - Connects between the battery pack and the memory module |
Cage | 455976-001 | Hard drive drawer with hard drive backplane and cables |
Chassis | 712429-001 | 600 Multilayer Director Switch (MDS) LCD chassis |
Controller | 456204-B21 | HP BLc7000 Onboard Administrator with KVM Option |
Controller | 377597-001 | Serial ATA (SATA) 6-port PCI RAID controller (Adaptec) |
Controller | 510026-001 | Smart Array P700m Serial Attached SCSI (SAS) Mezzanine controller - 3Gb/sec transfer rate up to 300MB/sec per physical link |
Display | 519349-001 | Module - LCD widescreen kit |
Door | 385966-001 | Front door assembly - For 10636 rack (10000 G2) - Includes hinges, front lock bar, and screws |
Drive | 517354-001 | 600GB hot-plug dual-port SAS hard disk drive - 15,000 RPM, 6Gb/sec transfer rate, 3.5-inch large form factor (LFF), Enterprise |
Drive | 868222-001 | 600GB SAS hard disk drive - 15,000 RPM, 6Gb/sec transfer rate, 3.5-inch large form factor (LFF), hot-plug, dual-port - For use with Gen7 or earlier models |
Drive | 667118-001 | 600GB SAS hard drive - 15,000 RPM, 3.5-inch large form factor (LFF), 12 Gb/s interface, dual-port , 512e format |
Drive | 512743-001 | 72GB hot-plug dual-port SAS hard disk drive - 15,000 RPM, 6Gb/sec transfer rate, 2.5-inch small form factor (SFF), Enterprise |
Drive (Product) | 516828-B21 | HP 600GB 6G SAS 15K 3.5in Entry Dual-Port (DP) Hard Drive Disk (HDD) |
Drive (Product) | 512545-B21 | HP 72GB 15K 6G 2.5 SAS Dual-Port (DP) Entry Hard Drive Disk (HDD) |
Enclosure | 695142-001 | Blade 3000c enclosure tape - No drive |
Enclosure | 507019-B21 | HP BLc7000 Configure-to-order 3 In LCD ROHS Enclosure |
Expansion Kit | AP763A | HP StorageWorks MDS600 Dual I/O Module Option Kit |
Fan | 413996-001 | System active cool 200 fan module |
Fan (Product) | 517520-B21 | HP BLc 6X Active Cool 200 FIO Fan Option |
Filler | 414051-001 | Device bay plastic blank |
Filler | 414053-001 | Interconnect blank |
Filler | 414054-001 | Onboard administrator module blank |
Filler | 416043-001 | Power supply blank |
Hardware | 490992-001 | Assembly retention power cord - Includes left and right brackets |
Hardware | 463756-001 | Blank Input-Output (I/O) module - Installed into unused drive bay to maintain airflow |
Hardware | 730772-001 | Drive Blank SFF with Yellow touch point |
Hardware | 414052-001 | Fan blank |
Hardware | 619824-001 | Hardware assembly - Includes front panel, and hard drive cage assembly |
Hardware | 619822-001 | Top cover assembly |
Hardware Kit | 432463-001 | Hardware kit - Contains device bay shelf, vertical cable cover, and left LCD cap |
Hardware Kit | 519560-001 | Hardware kit - Includes a fan blank, power supply blank, hard drive cage blank, and media bay blank |
Heat Sink | 508955-001 | CPU heatsink - Bulldozer type - Includes processor alcohol pad |
Heat Sink | 624787-001 | CPU heatsink - Vancouver type - Includes processor alcohol pad |
Memory (DIMM) | 501536-001 | 8GB, 1333MHz, PC3-10600R-9, DDR3, dual-rank x4, 1.50V, registered dual in-line memory module (RDIMM) |
Memory (Product) | 500662-B21 | HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit |
Memory Module | 451792-001 | 512MB Batery Backed Write Cache (BBWC) module - DDR2-533MHz, 72-bit wide - For HP Smart Array P410i and P700m controllers |
Module | 708046-001 | HP c7000 Onboard Administrator with KVM |
Module | 415839-001 | Insight management LCD display module |
Module | 503826-001 | Onboard Administrator with Keyboard, Video, Mouse (KVM) |
Pallet | 385976-001 | Shock pallet (10000 G2) - 0.6mm (23.6in) - Includes ramp, corner pads, and clips |
Panel | 385971-001 | Side panel assembly - For 10642 rack (10000 G2) - Includes lower and middle sections, corner cushions, cushion pad layer, cushion pad for lower panel, end foam sheet, and side foam sheet |
PC Board | 498472-001 | 2-port I/O module board with tray and cable |
PC Board | 689229-001 | AMP midplane assembly (fan power board) - Includes rear cage, for enclosure SKUs that start with 6xxxxx-xxx or 7xxxxx-xxx |
PC Board | 455977-001 | Fan power board with cables |
PC Board | 619823-001 | Hard drive backplane - SAS drive |
PC Board | 414050-001 | Middle backplane assembly board - For all HP C7000 enclosures that start with a SKU or Part number of 4xxxxx-xxx |
PC Board | 708047-001 | Midplane board assembly revision 2 - For all HP C7000 Enclosures that start with a SKU or Part number of 5xxxxx-xxx |
PC Board | 519348-001 | PC Board - LCD pass thru |
PC Board | 708071-001 | System board (motherboard) assembly R2 G7 |
PDU | 417587-D71 | 8.3 kVA modular Power Distribution Unit (PDU) - 40A, High Voltage (HV) core only, corded (North America, Japan) |
PDU | 417585-001 | Power Distribution Unit (PDU) - 100-240VAC, 12A - Has 2m (6.6ft) attached power cord with C20 (M) plug and eight C13 (F) receptacles |
PDU | 406362-001 | Single-phase AC input power module - 200VAC-240VAC, 50Hz-60Hz - Has a C19-C20 cord, and six IEC C20 inlets |
Plastics Kit | 619821-001 | Miscelaneous plastics and hardware kit - Includes a heatsink blank, left and right side DIMM baffles (with T-15 Torx screwdriver), battery tray, and enclosure connector cover |
Plastics Kit | 414063-001 | Miscellaneous plastics - Contains left and right handle covers, screws for endcaps, handles, and rear cage (qty 10), top rear cage endcap, and left and right enclosure bezel ear |
Plastics Kit | 531223-001 | Plastics kit - Includes a heatsink blank, DIMM baffle, battery tray, and enclosure connector cover |
Power Cord | 747034-001 | Cord AC line 16A, C19 to C20 - Gray color 2M (6.56)ft |
Power Cord | 242867-005 | Power cord (Gray), 16A - 2.0m (6.6ft) long - Has straight (F) C19 receptacle to straight (M) C20 plug |
Power Cord | 319304-001 | Power Distribution Unit (PDU) power cord (Black) - C20 (M) connector to C19 (F) connector - 2.5m (8.2ft) long - 250V, 16A |
Power Cord | 142258-004 | Power Distribution Unit (PDU) power cord (Black) - IEC 320 C14 (M) connector to right angle IEC 320 C13 (F) connector - 3.6m (11.8ft) long - 250V, 16A |
Power Module | 398922-D71 | 17.3 kVA S348 monitored power distribution unit (PDU) - Single input, 3Ohm, 48Amp, with 12 C-19 connectors and IEC 309 4-pin, 60A, Blue cord cap (For use in North American and Japan) - (Option AF916A) |
Power Module | 483915-001 | Connects four power supplies to a single power plug, power cord (1)C-20 connector for the PDU attaches (4) C-13 connectors |
Power Module | 413379-B21 | HP BLc7000 1 PH Factory Installed Option (FIO) Power Module |
Power Module | 413494-001 | Single-phase AC input power module (FIO) - 200VAC-240VAC, 50Hz-60Hz - Has a C19-C20 cord, and six IEC C20 inlets |
Power Supply | 441830-001 | 1200W AC Common Slot (CS) hot-plug power supply - Installs in computer chassis as primary or redundant supply (86-89% efficiency) - Requires 100-120VAC or 200-240VAC at 50/60Hz |
Power Supply | 517521-B22 | HP 6X 2400W Platinum Efficiency Factory Integration Only (FIO) Power Supply |
Power Supply | 588733-001 | Power Supply - 2450 watts, 12V-OUT, hot pluggable, high effyciency |
Power Supply | 570493-001 | Power supply hot-plug 2400W - Input voltage 200-240VAC, 50/60Hz, 50 watts - Output voltage 12.25V, 200A |
Processor | 594882-001 | Intel Xeon X5670 Quad-Core 64-bit processor - 2.93GHz (Westmere-EP, 12MB Level-3 cache, Intel QuickPath Interconnect (QPI) speed 6.4 GT/s, 95W thermal design power (TDP), socket FCLGA 1366) |
Processor Upgrade | 610859-L21 | HP BL460c G7 Intel Xeon X5670 (2.93GHz/6-core/12MB/95W) Factory Integration Only (FIO) Processor Kit |
Processor Upgrade | 610859-B21 | HP BL460c G7 Intel Xeon X5670 (2.93GHz/6-core/12MB/95W) Processor Kit |
Rack Mount Kit | 432461-001 | Rackmount kit - Includes right and left shelf rails, and M5 square hole cage and clip nuts |
Sleeve | 711994-001 | R2.04 administration onboard sleeve |
Storage System | AJ866A | HP StorageWorks MDS600 with Dual I/O Modules Disk System |
Switch | AJ864A | HP 3Gb 8-port SAS 2.0 BL-c Switch Module for BladeSystem c-Class Enclosure |
Switch | 708069-001 | HP Procurve 6120XG blade switch - For use with c-Class BladeSystem enclosures with one 10BASE-CX4 port and eight SFP+ 10-GbE uplinks |
Switch | 451789-001 | SAS switch - Musket board, 3Gb per second transfer rate |
Switch | 517994-001 | Switch - ProCurve 6120XG, Blade |
UPS | 638841-001 | R/T3000 G2 HV UPS - 200-volt, L6-20, 2U height (North America and Japan) |