| Keyword |
Part Number |
Description |
|---|
| Adapter | 489103-001 | SC08Ge SAS Host Bus Adapter (HBA) board - Has two x4 external SFF-8470 SAS connectors - Supports 3Gb/sec SAS and 1.5Gb/sec SATA devices - Requires one low profile (or full height) x8 PCIe slot |
| Airflow Guide | 572968-001 | Airflow baffle - Plastic baffle that mounts behind the fan modules and over the top of the processor heat sink and DIMM slots |
| Battery | 462976-001 | Battery module with integrated charger , Ni-MH, 4.8V, 650mAh - For use with the P212, P410, and P411 SAS controller boards with battery backed write cache (BBWC) |
| Bracket | 460014-001 | Optical disk drive (ODD) bracket - 1U to 2U form factor, 9.5mm (0.37in) wide |
| Bracket | 532475-001 | Optical drive bracket - For 9.5mm high optical drives - Mounts to the rear of the optical drive and is used to secure the drive in the drive bay |
| Cable | 613231-001 | 8-pin to 4-pin extension cable |
| Cable | 531997-001 | Cable - Serial ATA (SATA), power / data |
| Cable | 5183-2689 | Ethernet Crossover Cable - 2.1m (7ft) long, category 5E, RJ45 |
| Cable | 408767-001 | External mini-SAS cable - 2.0m (6.56ft) - For use with HP Smart Array controllers and to connect drive enclosures and I/O modules using SAS cables |
| Cable | 407339-B21 | External Mini-SAS Cable, 4x 2M - For connecting the Smart Array P800 Controller |
| Cable | 536399-001 | Hard drive backplane sensor data cable (I2C) - Connects from the hard drive backplane board to the system I/O board |
| Cable | 536398-001 | Optical drive dual cable assembly - Includes the power and SATA cables - Connects the optical drive to the power supply and the system I/O board SATA connector |
| Cable | 532474-001 | SATA power and data cable - 67cm (26in) long |
| Cable | 488137-001 | Smart Array P410/P411 battery cable assembly - 28AWG, 15-position, 356mm (14 inches) long - For use with Smart Array battery backed write cache (BBWC) - Connects between the battery pack and the memory module |
| Cable | 498425-001 | Straight mini-SAS to Straight mini-SAS cable assembly - 711mm (28.0 inches) long |
| Cage | 536402-001 | Fan cage (clip) - Holds the system cooling fans - Mounts to the bottom of the server chassis between the hard drive cage and the system I/O board |
| Cage | 532114-001 | Four-bay large form factor (LFF) hot-plug drive cage assembly - Includes the drive cage structure, backplane board, front panel board, and front panel cables |
| Cage | 637368-001 | Hard disk drive (HDD) cage - 4-bay, 1U form factor, G6 |
| Chassis | 582939-001 | Chassis 2U24 6G with midplane |
| Chassis | 481321-001 | Chassis with midplane - For Large Form Factor (LFF) hard drives |
| Chassis Kit | 582938-001 | Chassis 2U12 6G with midplane |
| Clip | 613233-001 | Power supply cable clip - Used with the 500 watt integrated power supply |
| Controller | 490094-001 | Controller - Modular Smart Array (MSA), 2300sa, G2, SAS direct attach, 3Gb per second transfer rate, up to 511LUN, SATA-300 / SAS |
| Controller | 462594-001 | Smart Array P212 controller board - PCIe x8 SAS controller - Has one internal x4 mini-SAS port and one external x4 mini-SAS port - Does not include memory or backup power |
| Cover | 389015-001 | Hard drive blank (cover) - To fill empty 3.5-inch large form factor (LFF) drive bay slots |
| Drive | 480942-001 | 1.0TB MSA2 SATA hard disk drve - 7,200 RPM, 3.5-inch large form factor (LFF) |
| Drive | 480937-001 | 146.0GB MSA2 dual-port Serial Attached SCSI (SAS) hard disk drive - 15,000 RPM, 3.5-inch height |
| Drive | 480942-002 | 1TB SATA Hard Drive Disk (HDD) - 7,200 RPM, 3.5in form factor |
| Drive | 480938-001 | 300.0GB MSA2 hard drive - 15,000 RPM, 3.5-inch form factor, Serial Attached SCSI (SAS), dual-port |
| Drive | 517350-001 | 300GB hot-plug dual-port SAS hard disk drive - 15,000 RPM, 6Gb/sec transfer rate, 3.5-inch Large Form Factor (LFF), Enterprise |
| Drive | 517351-001 | 300GB non-hot-plug dual-port SAS hard disk drive - 15,000 RPM, 6Gb/sec transfer rate, 3.5-inch Large Form Factor (LFF), Enterprise |
| Drive | 480939-001 | 450GB dual-port Modular Smart Array (MSA2) Serial Attached SCSI (SAS) hard disk drive - 15,000 RPM, 3.5-inch form factor |
| Drive | 480940-001 | 500GB SATA hard drive - 7,200 RPM, 3.5-inch form factor |
| Drive | 480941-001 | 750GB SATA hard disk drve - 15,000 RPM, 3.5-inch large form factor (LFF) - (Part of AJ739A, for use in MSA2) |
| Drive | 481431-001 | SATA DVD-RW optical drive - 8X DVD-ROM read, 9.5mm (0.374 inch) height |
| Fan | 519711-001 | Dual rotor fan module assembly - Includes the fan module with latch and cable assembly |
| Fan | 536401-001 | Fan assembly - Includes the dual rotor fan assembly and cable - Mounts in the fan cage and the cable plugs into the system I/O board |
| Hardware Kit | 536390-001 | Hardware and plastics kit - Includes slimline hard disk drive blank, rear I/O bracket (1U height), fixed PSU Bracket, and various Torx screws |
| Hardware Kit | 519560-001 | Hardware kit - Includes a fan blank, power supply blank, hard drive cage blank, and media bay blank |
| Heat Sink | 511803-001 | Processor heatsink assembly - Includes thermal grease syringe, thermal grease application card, and alcohol pad |
| Heat Sink | 536392-001 | Screw-down type processor heatsink - Screws to the system I/O board |
| Memory (DIMM) | 501533-001 | 2GB, 1333MHz, PC3-10600R-9, DDR3, dual-rank x8, 1.50V, registered dual in-line memory module (RDIMM) |
| Memory Module | 462974-001 | 256MB battery backed write cache (BBWC) memory module - Does not include the controller board or battery |
| Nameplate/Logo | 536407-001 | DL320 server model nameplate |
| Panel | 507262-001 | Access panel - Top cover for the server |
| PC Board | 535348-001 | Backplane four bays SAS/SATA hard drive - 1U form factor to 2U form factor |
| PC Board | 511808-001 | PCIe riser board with x16 connector (maximum x16 interconnect) - Mounts to the full-height, full length side of the riser cage |
| PC Board | 511809-001 | PCIe riser board with x16 connector (maximum x4 interconnect) - Mounts to the half-height (low-profile), half-length side of the riser cage |
| PC Board | 536391-001 | System board - Includes Intel Nehalem processor installer, processor alcohol pad, thermal grease syringe, thermal grease application card, and blank thermal print label |
| Plastics Kit | 507260-001 | Plastics kit - Includes small form factor blank, low profile PCI array bracket, slimline bracket, M2 screws (0.4x.2.1mm), TT screws (6-32x.160,SLT-T15), power supply blank, and LC2UG6 rear I/O panel |
| Power Cord | 142258-001 | AC power distribution unit (PDU) power cord (Black) - 250VAC, 16AWG, 2.0m (6.6ft) long - Includes IEC-320 C14 (M) connector to IEC 320 C13 (F) connector |
| Power Cord | 142258-002 | AC power distribution unit (PDU) power cord (Black) - 250VAC, 16AWG, 2.5m (8.2ft) long - Includes IEC-320 C14 (M) connector to IEC 320 C13 (F) connector |
| Power Supply | 506247-001 | 500 watt integrated AC power supply - Multiple outputs - Mounts in the right rear corner of the server |
| Power Supply | 637272-001 | 500-watt power supply - Low Total Harmonic Distortion (LTHD) |
| Power Supply | 481320-001 | Power supply - 595W, DC model |
| Processor | 536891-001 | Intel Nehalem EP Xeon Quad-Core processor E5504 - 2.0GHz (Gainestown, 1366MHz front side bus, 4MB Level-2 cache, 45nm process, socket LGA-1366, 80W TDP) |
| Processor | 490074-001 | Intel Xeon E5504 Quad-Core 64-bit processor - 2.00GHz (Nehalem-EP, 4MB Level-3 cache, Intel QuickPath interconnect (QPI) speed 4.8 GT/s, 80 watt thermal design power (TDP), FCLGA 1366 socket) |
| Rack Mount Kit | 573091-001 | Rack mounting rail kit - For 1U and 2U high server models - Includes left and right slide rails and mounting hardware |