Keyword |
Part Number |
Description |
| RM1-1001-040CN | Paper cassette - 500 sheet paper holding cassette - Can be used in optional 500-sheet tray 2,3,4 or 5 |
ADF Assembly | PF2282-SVPNR | ADF assembly - For LaserJet 4345MFP - Includes rear cover, cable, input tray, front cover, mylar replacement kit, white scan background, mylar holder assembly, white mylar backing with two springs, left cover, screw 4x10 |
Arm | RC1-2827-000CN | Arm - Goes on the upper inside front of printer |
Arm | RC1-2828-000CN | Arm - Triangle shaped arm on upper inside front of printer |
Arm | RC1-2782-000CN | Paper size arm - Senses paper size in paper tray - Three used |
Belt | RM1-0025-040CN | Paper feed belt assembly |
Button | RC1-3044-000CN | Power switch button - Located on lower left side of printer |
Cable | RM1-1381-020CN | Control panel cable - From DC controller PCA to the front control panel |
Cable | 5851-2720 | Data cable for hard disk drive (2-wire) |
Cable | RM1-1371-000CN | Delivery unit cable - From DC controller PCA to stapler/stacker unit |
Cable | RM1-1397-000CN | Door switch cable - From DC controller PCA to top cover switch (SW101) |
Cable | RM1-1193-000CN | Envelope feeder cable - From DC Controller board to envelope feeder connector - Includes envelope feeder connector |
Cable | RM1-1376-020CN | Fan cable - From DC controller PCA to DC controller PCA cooling fan (FN104) |
Cable | RM1-1370-000CN | Feeder cable - Data cable for optional 500-sheet feeder assembly - From DC controller to 500-sheet optional feeder |
Cable | RM1-1357-000CN | Flat ribbon cable - Ribbon cable between the scanner controller PCA and the formatter PCA |
Cable | PF2282K165NI | From ADF to scan control board cable |
Cable | RM1-1400-000CN | Grounding cable - Duplexing unit grounding cable |
Cable | 5851-1827 | Hard drive ribbon cable - Includes the data cable and power connections |
Cable | RM1-1398-000CN | Image scanner cable - From DC controller board to image scanner assembly |
Cable | RM1-1367-000CN | Laser scanner cable - From DC controller board to laser scanner assembly |
Cable | RM1-1375-000CN | Power cable - From DC controller PCA to power factor correction (PFC) power supply PCA |
Cable | 5851-3051 | Power cable for hard disk drive (5-wire) |
Cable | RM1-1380-000CN | Reversing cable - From DC controller PCA to reversing intermediate PCA |
Cable | RK2-0470-000CN | Ribbon cable - Flat cable between DC Controller Board and engine power supply board - J80 to J50 |
Cable | RK2-0469-000CN | Ribbon cable - Flat cable between DC Controller Board and engine power supply board - J81 to J51 |
Cable | RM1-1372-000CN | Scanner joint cable - From DC Controller to J1422D - Scanner motor and beam detect PCA |
Cable | RM1-1368-000CN | Sensor cable - From DC controller PCA to delivery tray full sensor (PS104) |
Cable (Interface) | 8120-8907 | Telephone cable - 3.0m (9.8ft) long (Gray) - RJ-11 plug on one end (Australia) |
Cable (Interface) | 8120-8922 | Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 phone plug connectors (Eastern Europe, Czechoslovakia, Slovenia, and Hungary) |
Cable (Interface) | 8120-8911 | Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Denmark) |
Cable (Interface) | 8120-8916 | Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Finland and Norway) |
Cable (Interface) | 8120-8923 | Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (France, Morocco, and Tunisa) |
Cable (Interface) | 8120-8912 | Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Germany) |
Cable (Interface) | 8120-8913 | Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Israel) |
Cable (Interface) | 8120-8914 | Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Italy) |
Cable (Interface) | 8120-8915 | Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Netherlands) |
Cable (Interface) | 8120-8917 | Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (South Africa) |
Cable (Interface) | 8120-8918 | Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Sweden) |
Cable (Interface) | 8120-8920 | Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Turkey) |
Cable (Interface) | 8120-8921 | Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (United Kingdom, Egypt, Hong Kong, New Zealand) |
Cable (Interface) | 8120-8908 | Telephone cable - 3.0m (9.8ft) long (Gray) - RJ-11 plug on one end (Korea) |
Cable (Interface) | 8121-0811 | Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain) |
Cable (Interface) | 8121-0844 | Telephone cable with bill tone filter - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Switzerland) |
Card | J7972G | Parallel port card - 1284B Parallel card - Compatible operating systems Windows NT 4.0, 98, 2000, Me, XP |
Cartridge | Q5945-67901 | Black toner cartridge - Has maximum capacity toner (prints approximately 18,000 pages) |
Cartridge | Q5945A | Black toner cartridge - Has maximum capacity toner (prints approximately 18,000 pages) |
Cartridge | Q5945AG | Black toner cartridge - Will print approximately 18,000 pages based on a 5% print density |
Case | RC1-0245-000CN | Envelope feeder connector case - Plastic piece that secures the envelope feeder connector to the printer |
Clip | XD9-0234-000CN | E-Type retainer ring |
Clutch | RK2-0349-000CN | Paper feed assembly clutch (CL101) - Electro mechanical clutch that connects to the white 30-tooth gear |
Control Panel | CB425-67903 | Control panel assembly - Control buttons and display located on top of the printer - Does not include overlay |
Cover | PF2282P059NI | ADF cover - Plastic front cover for ADF assembly |
Cover | PF2282P044NI | ADF cover - Plastic rear cover for ADF assembly |
Cover | PF2282K166NI | ADF hinge flap - ESD hinge cover for ADF assembly |
Cover | PF2282P060NI | ADF output tray bottom cover |
Cover | RM1-1018-000CN | Duplexer slot cover assembly - Removable lower rear cover for duplexer attachment slot |
Cover | RL1-0455-000CN | Envelope feeder cover |
Cover | RC1-3035-000CN | Formatter cover |
Cover | CB425-60101 | Formatter metal cage cover |
Cover | RL1-0457-000CN | Front corner scanner cover |
Cover | RM1-0942-000CN | Front cover - Covers the front and center of the printer |
Cover | RC1-3196-000CN | Front cover - Front side upper cover for 500 sheet feeder |
Cover | RM1-1015-000CN | Front cover asembly - Front plastic piece that control panel mounts to |
Cover | RC1-3052-000CN | Front left side cover |
Cover | RC1-2881-000CN | Handle cover - Lower right side cover handle |
Cover | RC1-3041-000CN | Inner front left corner cover |
Cover | PF2282P041NI | Jam access cover - Top access cover for ADF assembly |
Cover | RC1-2820-000CN | Latch handle cover - Front cover for latch handle on upper plate assembly |
Cover | PF2282P058NI | Left cover - left external cover for ADF unit |
Cover | RC1-3199-000CN | Left cover - Left side cover for 500 sheet feeder |
Cover | RC1-3042-000CN | Left rear corner cover |
Cover | IR4041P214NI | Lock cover - Flatbed scanner carriage lock cover - Top left side of flatbed scanner |
Cover | RC1-3043-000CN | Lower left cover - Plastic cover for left side of scanner module - Printer power switch mounts to this cover |
Cover | RM1-1033-000CN | Lower right cover assembly - Smaller plastic piece below upper right cover - Allows access to tray 2 separation roller |
Cover | PF2282K040NI | Pickup roller cover - `C` shaped plastic cover that surrounds the paper pickup roller assembly - Mounts on the bottom of the ADF cover assembly |
Cover | RC1-3197-000CN | Rear cover - Back side cover for 500 sheet feeder |
Cover | RC1-2598-000CN | Rear cover - Located on back of the printer next to the formatter cover |
Cover | RM1-1017-000CN | Rear printer cover assembly - Plastic cover for rear of printer |
Cover | RC1-3198-000CN | Right cover - Right side upper cover for 500 sheet feeder |
Cover | RM1-1016-000CN | Right cover assembly - Tray 1 attaches to this cover |
Cover | IR4041K114NI | Side cover - Left side trim cover for flatbed scanner assembly |
Cover | IR4041P213NI | Side cover - Right side trim cover for flatbed scanner assembly |
Cover | RC1-3200-000CN | Upper cover - Left side upper cover for 500 sheet feeder - Small top edge cover on left side |
Damper | RM1-1574-000CN | Front gas damper assembly |
Damper | RM1-1575-000CN | Rear gas damper assembly |
Display | RM1-1456-000CN | Tray number plate assembly - Changeable tray number display assembly - Located in front right corner of 500 sheet feeder assembly |
Door | RC1-2597-000CN | Stapler/stacker access door - Front jam access door for stapler/stacker unit |
Door | RM1-0981-000CN | Three bin mailbox access door - Front jam access door for three bin mailbox unit |
Drive | 0950-4753 | 40GB SATA hard drive - 5,400 RPM, 2.5 inch form factor, 9.5mm height |
Drive | J7989G | Hard drive - High performance EIO serial ATA hard drive |
Drive | 5851-3833 | Hard drive kit - With both plastic side rails |
Drive Assembly | RM1-1029-040CN | Lifter drive assembly support - Tray 2 paper pickup lifter drive support assembly |
Drive Assembly | RM1-1049-000CN | Main drive gear assembly - Located at the rear part of the printer |
Duplexer | Q5969-67901 | Duplexer assembly - For two sided printing |
Duplexer | Q5969A | HP LaserJet 4345mfp optional duplexer assembly - For two sided printing |
Envelope Feeder | Q2438-67902 | Envelope feeder assembly - Holds up to 75 envelopes - Mounts in the tray 1 slot on the front of the printer |
Envelope Feeder | Q2438B | Envelope feeder assembly - Holds up to 75 envelopes - Mounts in the tray 1 slot on the front of the printer - Includes the envelope tray and multi-lingual installation instructions |
Fan | RK2-0278-000CN | Cooling fan - Located on left side of printer (FN101) |
Fan | RK2-0280-000CN | Cooling fan (FN105) - Located on right side of printer - Provides air to the print cartridge area |
Fan | RK2-0472-000CN | DC Controller fan (FN104) - Provides air to the DC controller area |
Flag | RC1-0462-000CN | Output bin full flag |
Flag | RL1-0462-000CN | Output bin full flag |
Flag | RC1-0060-050CN | Paper feed sensor flag - For tray 1 |
Flag | RM1-1010-000CN | Paper sensing guide - Paper guide/flag assembly with sensor (PS101) |
Flag | RC1-0378-000CN | Shutter flag |
Flange | IR4041P215NI | ADF front cover flange - Narrow cover that snaps into place to cover the leading edge of scanning assembly - Fills gap between the front cover and the scanner assembly. |
Frame | PF2282K034NI | ADF separation pad frame assembly - Includes the full width support structure and the ADF separartion pad assembly - Mounts in the top of the ADF assembly at the back of the input tray |
Fusing Assembly | RM1-1043-080CN | Fusing Assembly - For 100-127 VAC - Bonds toner to paper with heat |
Fusing Assembly | CB425-69003 | Fusing assembly - For 220 VAC operation - Bonds toner to paper with heat |
Gear | RU5-0254-000CN | 14-tooth gear - Located in right rear corner of the 500-sheet paper cassette |
Gear | RU5-0253-000CN | 15-tooth gear - Located in right rear corner of the 500-sheet paper cassette |
Gear | RU5-0045-020CN | 18-tooth gear - Located on right side of printer in the tray 2 paper pickup assembly |
Gear | RU5-0045-030CN | 18-tooth gear - Located on right side of printer in the tray 2 paper pickup assembly |
Gear | RU5-0256-000CN | 23-tooth gear - Located on right side under paper pickup drive assembly |
Gear | RU5-0050-000CN | 30-tooth gear - Black plastic gear that attaches to paper feed assembly clutch |
Gear | RC1-0331-000CN | Gear - 20-tooth gear used to synchronize paper width adjustment stops - Located in right side bottom of cassette |
Gear | PF2282P039NI | Pick-up gear |
Guide | RC1-2884-000CN | Duplexer guide - Guide/support for duplexer assembly |
Guide | RM1-1046-020CN | Entrance guide - Fuser paper entrance guide |
Guide | RC1-3020-000CN | Front guide - For the 500-sheet paper cassette |
Guide | RM1-1027-000CN | Guide assembly - Guide that protects the large flat cable between the scanner controller PCA to the formatter PCA |
Guide | RM1-0947-000CN | Jog guide assembly |
Guide | RC1-2854-000CN | Legal size paper guide - Located in upper plate assembly |
Guide | PF2282P353NI | Paper guide - ADF clear plastic paper guide |
Guide | RM1-1019-000CN | Reversing separation guide assembly |
Guide | RC1-2853-000CN | Upper cartridge guide - Located in upper plate assembly |
Hinge | PF2282K041NI | Hinge assembly - ADF left side hinge assembly |
Hinge | PF2282K008NI | Hinge assembly - ADF right side hinge assembly |
Hinge | RC1-2901-000CN | Right side door hinge - Two used |
Holder | RC1-3063-000CN | Door switch holder - Secures top cover switch (SW101) to frame |
Holder | RC1-2864-000CN | Flag holder - Output bin full flag holder |
Holder | RC1-2823-000CN | Front cover lock stopper holder |
Holder | RC1-3002-000CN | Link holder - Holder/mount for mechanical link beteen metal rod and outside power switch |
Holder | PF2282K043NI | Mylar holder assembly - This is the cover (holder) that holds the clear mylar sheet in place - Mounts on the bottom of the ADF assembly |
Holder | RC1-2855-000CN | Right side laser shutter holder |
Interface (Product) | J6035D | HP JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port |
Interface (Product) | J6035G | HP JetDirect 175XExternal Print Server - Includes setup poster, software, folding sleeve for storing the poster and CD, power adapter and 2-foot USB cable |
Interface (Product) | J7934G | HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM |
Interface (Product) | J7960G | HP Jetdirect 625n internal ethernet print server - Provides 10BaseT, 100BaseTX, or 1000BaseT interface for products with an EIO port |
Interface (Product) | J7961G | HP Jetdirect 635n IPv6/IPsec Print Server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM |
Interface (Product) | J7942A | HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module |
Interface (Product) | J7942G | HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module |
Interface (Product) | J7951G | HP Jetdirect ew2400 802.11g wireless print server module - Includes power supply, USB cable, LAN/Ethernet cable, setup documentation and software |
Interface (Product) | J4135A | JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO slots on selected DesignJet and LaserJet printers |
Laser/Scanner | RM1-1573-040CN | Laser/scanner assembly |
Latch | PF2282K164NI | Access latch - ADF jam accesss latch |
Latch | RC1-2821-000CN | Rear cover lock - Located at rear of upper plate assembly |
Latch | RC1-2818-000CN | Upper plate latch - Locking latch for upper plate assembly |
Lever | RC1-3106-000CN | Laser scanner shutter lever |
Lever | RM1-0043-060CN | Swing plate assembly - For tray 2 paper lift assembly - Located between the main gear assembly and the fuser, just above the power supply. |
Lifter | RM1-1457-050CN | Lifter drive assembly - For 500-sheet paper feeder assembly |
Lifter | 5851-2766 | Swing plate assembly - For tray 2 paper lift assembly - Located between the main gear assembly and the fuser, just above the power supply - Contains swing plate assembly and new fuser pressure release gear |
Link | RC1-3003-000CN | Power switch link - Mechanical link beteen metal rod and outside power switch |
Lock | IR4041K102NI | Scanner carriage lock assembly - Includes the brackect, the two slider/lock pieces and spring - Locks the optical assembly carriage in place to prevent damage when shipping |
Mailbox | Q5692-67901 | Color LaserJet 4345 and 4370MFP three bin multi-bin mailbox |
Mailbox | Q5692A | Mailbox accessory - Three bin mailbox for LaserJet 4345 series |
Maintenance Kit | Q5997-67901 | ADF maintenance kit - Includes the ADF paper pick-up roller assembly, separation pad assembly, and three clear mylar replacement strips |
Maintenance Kit | Q5997A | ADF maintenance kit - Includes the ADF paper pick-up roller assembly, separation pad assembly, and three clear mylar replacement strips |
Maintenance Kit | Q5998A | HP LaserJet 4345mfp 110VAC maintenance kit |
Maintenance Kit | Q5999-67904 | LaserJet 4345MFP printer maintenance kit - For 220 VAC - Includes fusing assembly separation rollers, transfer roller, paper feed rollers, pickup roller, gloves, and instruction manual |
Maintenance Kit | Q5998-67904 | Maintenance kit - For 120 VAC - Includes fusing assembly, separation rollers, transfer roller, paper feed rollers, pick-up roller, gloves and instruction manual |
Maintenance Kit | Q5999A | Maintenance kit - For 220 VAC - Includes fusing assembly, three separation rollers, transfer roller, three paper feed rollers, pick-up roller, and instruction manual |
Memory (DIMM) | Q7718A | 128MB, 100-pin, DDR DIMM |
Memory (DIMM) | Q7718-67951 | 128MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (DIMM) | Q7719-67951 | 256MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (DIMM) | Q7719A | 256MB, 100-pin, DDR DIMM |
Memory (DIMM) | Q2627A | 256MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (DIMM) | Q7713-67951 | 32MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (DIMM) | Q2625A | 64MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (DIMM) | Q7715-67951 | 64MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Motor | RK2-0273-000CN | Main motor (M101) assembly |
Motor | RK2-0473-000CN | Stepper motor (M104) - Crossing motor located in the paper reversing assembly |
Motor | RK2-0474-000CN | Stepper motor (M105) - Motor that drives the reversing roller located in the paper reversing assembly |
Motor | RK2-0475-000CN | Stepper motor (M106) - Paper delivery motor located in the paper reversing assembly |
Motor | RK2-0275-000CN | Toner cartridge motor (M102) - Mounts on the front right side of the printer |
Mylar | PF2288K050NI | ADF mylar replacement kit - Includes three clear mylar replacement strips for the ADF guide - Mounts in the ADF mylar holder assembly |
Mylar | Q6496A | HP LaserJet 4345 mfp ADF mylar sheets - Package of three sheets |
Overlay | CB425-60125 | Control panel overlay - Snaps on top of the control panel assembly (Arabic) |
Overlay | CB425-60129 | Control panel overlay - Snaps on top of the control panel assembly (Croatian) |
Overlay | CB425-60116 | Control panel overlay - Snaps on top of the control panel assembly (Czech) |
Overlay | CB425-60113 | Control panel overlay - Snaps on top of the control panel assembly (Danish) |
Overlay | CB425-60106 | Control panel overlay - Snaps on top of the control panel assembly (Dutch) |
Overlay | CB425-60103 | Control panel overlay - Snaps on top of the control panel assembly (English) |
Overlay | CB425-60112 | Control panel overlay - Snaps on top of the control panel assembly (Finnish) |
Overlay | CB425-60108 | Control panel overlay - Snaps on top of the control panel assembly (for use in the Netherlands) |
Overlay | CB425-60104 | Control panel overlay - Snaps on top of the control panel assembly (French) |
Overlay | CB425-60124 | Control panel overlay - Snaps on top of the control panel assembly (Greek) |
Overlay | CB425-60123 | Control panel overlay - Snaps on top of the control panel assembly (Hebrew) |
Overlay | CB425-60117 | Control panel overlay - Snaps on top of the control panel assembly (Hungarian) |
Overlay | CB425-60105 | Control panel overlay - Snaps on top of the control panel assembly (Italian) |
Overlay | CB425-60110 | Control panel overlay - Snaps on top of the control panel assembly (Norwegian) |
Overlay | CB425-60114 | Control panel overlay - Snaps on top of the control panel assembly (Polish) |
Overlay | CB425-60109 | Control panel overlay - Snaps on top of the control panel assembly (Portuguese) |
Overlay | CB425-60130 | Control panel overlay - Snaps on top of the control panel assembly (Romanian) |
Overlay | CB425-60115 | Control panel overlay - Snaps on top of the control panel assembly (Russian) |
Overlay | CB425-60131 | Control panel overlay - Snaps on top of the control panel assembly (Slovak) |
Overlay | CB425-60132 | Control panel overlay - Snaps on top of the control panel assembly (Slovenian) |
Overlay | CB425-60107 | Control panel overlay - Snaps on top of the control panel assembly (Spanish) |
Overlay | CB425-60111 | Control panel overlay - Snaps on top of the control panel assembly (Swedish) |
Overlay | CB425-60122 | Control panel overlay - Snaps on top of the control panel assembly (Turkish) |
Pad | PF2282K035NI | ADF paper seperation pad assembly - Mounts in the center of the ADF separation pad frame assembly at the rear part of the paper input tray |
Pad | RL1-0007-000CN | Tray 1 paper separation pad |
PC Board | RM1-1122-000CN | 500-sheet feeder driver PCA |
PC Board | RM1-1354-000CN | DC controller PCA - For LaserJet 4345mfp series |
PC Board | RM1-1041-040CN | Engine power supply board - For 110 VAC |
PC Board | CB425-67911 | Formatter PC board assembly - For Laserjet M4345MFP |
PC Board | RM1-1379-000CN | Reversing unit intermediate PC board |
PC Board | IR4041K512NR | Scanner Control Board (SCB) - Provides timing and control for the flatbed scanner |
PC Board (Modem) | Q3701A | HP LaserJet MFP Analog Fax Accessory 300 |
PC Board (Modem) | Q3701-60020 | Modem PCA - HP LaserJet analog fax accessory 300 |
Pickup Assembly | RM1-0034-070CN | Paper pick-up assembly - Paper pickup drive assembly for tray 2 input tray - Does not include the 18-tooth gear - In order to install this part the 18-tooth gear must be removed and replaced |
Plate | PF2282P339NI | ADF white plastic scanner background plate - Used as a white background during flatbed document scanning - Mounts on the underside of the ADF assembly (above the scanner assembly) |
Plate | PF2282P025NI | White backing plate assembly - Used as a white background for scanning documents when passing through the ADF assembly - Mounts on the underside of the ADF assembly towards the rear |
Power Cord | 8121-0736 | Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 100VAC in Japan) |
Power Cord | 8121-0964 | Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 110VAC in Taiwan) |
Power Cord | 8121-0733 | Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220VAC in Denmark) |
Power Cord | 8121-0738 | Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220VAC in Switzerland) |
Power Cord | 8121-0737 | Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 240VAC in India and South Africa) |
Power Cord | 8121-0731 | Power cord (Black) - 18 AWG, three conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For 220V in Europe) |
Power Cord | 8121-0739 | Power cord (Black) - 18 AWG, three conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For 240V in Singapore, Hong Kong and the U.K.) |
Power Cord | 8121-0734 | Power cord (Black) - 18 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220V in Brazil and Thailand) |
Power Cord | 8121-0564 | Power cord (Black) - 2.0m (6.6ft) long - Has straight (F) C13 receptacle (For 240V in India) |
Power Cord | 8121-0740 | Power cord (Black) - 3-wire, 18 AWG, 1.9m (75in) long - Has straight (F) C13 receptacle (for 120V in the USA, Canada, Mexico, and Taiwan) |
Power Cord | 8120-6813 | Power cord (Dove Gray) - Three Conductor, 2.3M (7.5ft) long - Has straight (F) C13 receptacle (For 240VAC in the United Kingdom, Hong Kong, Singapore, Malaysia) |
Power Cord | 8120-8707 | Power cord (Flint Gray) - 17 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220VAC in China) |
Power Cord | 8120-6814 | Power cord (Flint Gray) - 17 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220VAC in Denmark) |
Power Cord | 8120-6815 | Power cord (Flint Gray) - 17 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220VAC in Switzerland) |
Power Cord | 8120-6798 | Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 100VAC in Japan) |
Power Cord | 8120-6980 | Power cord (Flint Gray) - 18 AWG, 4.5m (14.8ft) long - Has straight (F) receptacle (For 220V in South America) |
Power Cord | 8120-6812 | Power cord (Flint Gray) - 18 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 120VAC in the United States, Canada, Mexico, Philippines, and Taiwan) |
Power Cord | 8120-8706 | Power cord (Flint Gray) - 2.3m (7.5ft) long - Has EPSR symbol molded into the plug and straight (F) receptacle (for 220V in Hong Kong) |
Power Cord | 8120-6869 | Power cord (Flint Gray) - 3-wire, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Argentina) |
Power Cord | 8121-1004 | Power cord (Flint Gray) - Three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220VAC in Israel) |
Power Supply | RM1-1013-050CN | DC power supply - 110VAC |
Power Supply | RM1-1014-050CN | DC power supply PCB - For 220 VAC operation |
Power Supply | RM1-1014-060CN | Low voltage power supply (LVPS)- For 220 VAC |
Rail | RM1-1011-000CN | Cassette support rail - Left side tray 2 support rail assembly |
Rail | RM1-1012-000CN | Cassette support rail - Right side tray 2 support rail assembly |
Reversing Unit | RM1-1022-000CN | Reversing assembly - Reverses paper orientation of output tray |
Rod | RC1-2830-000CN | Link rod - Connects to the toner cartridge drive gear mechanism |
Rod | RC1-2980-000CN | Switch rod - Metal rod that connects switch link to electrical switch on the engine power supply board |
Roller | Q7829-67925 | Feed roller high capacity input (HCI) - Transmit the paper from the cassette and feeds it to the device entrance (blue) |
Roller | Q7829-67940 | Paper feed roller assembly - Includes four feed serparation rollers |
Roller | RM1-0037-020CN | Paper feed/separation roller assembly - Gray rubber roller on a blue plastic cylinder |
Roller | RM1-0036-020CN | Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24-tooth white gear on one side |
Roller | RM1-1110-000CN | Transfer roller assembly - Long black spongy roller that transfers charge to paper |
Roller | RL1-0019-000CN | Tray 1 pickup roller - D-shaped roller located under the envelope cover |
Roller Assembly | PF2282K039NI | ADF paper pickup roller assembly - Includes the pickup roller, separation roller, and drive gear mounted in a frame - Mounts on the bottom of the ADF cover assembly (above the input paper tray) |
Roller Assembly | RM1-0012-020CN | Paper feed roller assembly |
Roller Assembly | RM1-1098-030CN | Registration roller assembly |
Scanner | IR4041-SVPNR | Scanner assembly - Complete flatbed scanner assembly |
Screw | WS9-0255-000CN | Hex head bolt - Thumbscrew on left rear corner - Two used |
Screw | XA9-1447-000CN | M12 pan-head Phillips screw with annular nails - 8mm long |
Screw | XA9-1500-000CN | M3 pan-head Phillips screw with flat washer - 8mm long |
Screw | XA9-1449-000CN | M3 pan-head Phillips screw with machine threads - 8mm long |
Screw | 030080FWWSNI | M3 pan-head phillips screw with machine threads and captive washer - 8mm long |
Screw | IR4041P021NI | M3 pan-head phillips screw with plastite threads - 8mm long |
Screw | 0515-4679 | M3 pan-head phillips screw with washer - 6mm long |
Screw | XB4-7300-809CN | M3 self-tapping pan head phillips screw (Black oxide finish) - 8mm long |
Screw | RC1-0266-020CN | M3 stepped shaft screw |
Screw | XA9-1420-000CN | M3 X 8mm pan head phillips screw with captive flat and split-lock washers |
Screw | XB2-7300-607CN | M3X6mm screw with captured washer |
Screw | 040100FNBBNI | M4 pan-head phillips screw with machine threads - 10mm long |
Screw | XB4-7401-005CN | M4 pan-head phillips screw with self-tapping threads - 10mm long |
Screw | XA9-1464-000CN | Screw - Flat head phillips drive machine screw - M3 X 6mm |
Screw | 030040FNITNI | Screw - used to secure flatbed scanner slide rail |
Screw | XA9-1495-000CN | Wafer head machine screw - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal |
Sensor | WG8-5849-000CN | Duplex re-pick sensor - Detects the leading edge of the page |
Sensor | RM1-8438-000CN | Environmental sensor assembly |
Sensor | RM1-1455-000CN | Paper sensing assembly - Paper present sensing assembly - SR1 |
Sensor | WG8-5624-000CN | Photo-sensor (TLP1241) - Sensor flag activated |
Sensor | RM1-1570-000CN | Reversing unit paper delivery sensor (PS109) |
Sensor | RM1-1571-000CN | Reversing unit paper jam sensor (PS111) |
Sensor | IR4041K105NI | Scanner open sensor assembly - Includes the housing, spring-loaded plunger, and two sensors - Detects when the ADF assembly is open and the optical assembly home position sensor |
Sensor | RM1-0041-020CN | Tray 2 paper size tray sensing assembly - White plastic tray size sensing fingers and microswitch assembly |
Solenoid | RK2-0269-000CN | Paper pick-up solenoid |
Solenoid | RK2-0485-000CN | Reversing unit face-up solenoid (SL105) |
Solenoid | RK2-0486-000CN | Reversing unit separation roller solenoid (SL106) |
Solenoid | RK2-0276-000CN | Tray 1 solenoid - Engages tray 1 pick-up roller |
Spacer | RC1-0392-000CN | Screw spacer - Washer used with screws to secure bottom plate to printer - Two used |
Spring | PF2282P343NI | Compression spring - Holds the white mylar backing plate firmly against the document passing through the ADF assembly - Two used |
Spring | PF2282P352NI | Cover spring - Provides tension for left side plastic cover of ADF assembly - Two used |
Spring | RU5-2251-000CN | Grounding spring - Located near front of left side casstte support rail |
Spring | IR4041P041NI | Slide spring - Provides tension for flatbed scanner left side cover |
Spring | RC1-0167-000CN | Tension spring - Provides tension for paper size sensor (PS102) |
Spring | RC1-0061-000CN | Torsion spring |
Spring | RC1-0379-000CN | Torsion spring - Provides tension for shutter flag |
Stacker Assembly | Q5691A | 500 sheet stapler/stacker assembly |
Stacker Assembly | Q5691-67901 | 500-sheet stapler/stacker assembly |
Stand | Q5970A | LaserJet 4345mfp stand with storage cabinet |
Staple Cartridge | C8091A | Sstaple cartridge - Contains 5000 staples |
Staple Cartridge | Q7829-67921 | Staple cartridge - Contains 5000 staples - For the add-on staple/stacker unit |
Stapling Unit | RK2-0507-000CN | Stapler mechanism |
Stop | RC1-3124-000CN | Hinge shaft stopper - Holds the right side door hinge pin in place |
Stop | PF2282P061NI | Paper stop - ADF output tray paper stop |
Stop | RL1-0434-000CN | Stopper - Front cover lock stopper |
Support | RC1-2856-000CN | Cartridge support - Lower toner cartridge support - Located in upper plate assembly |
Support | RC1-2911-000CN | Crossmember support - Plate on left side of upper plate assembly |
Support | RL1-0436-000CN | Damper support - Metal support bracket that attaches to printer chassis that supports bottom of gas damper |
Support | RC1-3102-000CN | Upper guide support block - Small L-shaped plastic block which supports the upper portion of the reversing mechanism |
Switch | WC4-5139-000CN | Top cover interlock access switch |
Thermistor | RK2-0359-000CN | Environment temperature detection thermistor - Detects ambient air temperature to determine length of time for fuser warm up |
Torque Limiter | RC1-2758-000CN | Torque limiter - Limits rotation of feed rollers |
Tray | RM1-0005-020CN | Drop down Tray 1 - Includes adjustable paper width guide assembly |
Tray Assembly | PF2282K042NI | ADF input tray assembly |
Tray Assembly | Q5968A | HP LaserJet 4345 mfp 500-Sheet feeder assembly |
Tray Assembly | RM1-1047-000CN | LaserJet 4345mfp delivery tray assembly |
Tray Assembly | RM1-1567-000CN | Multi-purpose/tray 1 paper input tray - Fold down tray - Located on the right side of the printer |
Tray Assembly | RM1-1572-040CN | Multi-purpose/tray 1 paper input tray assembly - Does not include outside cover |
Tray Assembly | Q5968-67901 | Optional 500-sheet paper feeder and tray/cassette - For HP LaserJet 4345 series - This is the assembly frame and tray that the printer sits on top of |
Tray Assembly | Q5690A | Paper input tray - High Capacity - Additional wheeled-input tray that holds up to 2500 sheets (16 lb paper) - It supports letter, legal, tabloid, 12 x 18 in, 13 x 19 in |
Tray Assembly | RM1-0940-000CN | Paper output tray - With pull out tray extension |
Unknown Keyword | RC1-2833-000CN | Arm cover - Located on upper front inside of the printer |
Unknown Keyword | RC1-3090-000CN | Bushing stop - For the fuser lever - Located on the inside upper front part of the printer - Two used |
Unknown Keyword | RM1-1045-000CN | Door sensor assembly - 500-sheet feeder assembly access door open sensor (SW501) switch assembly |
Unknown Keyword | RM1-1042-040CN | Engine power supply board - For 220 VAC |
Unknown Keyword | RC1-2822-000CN | Handle link - Mechanical link between upper plate handle and release latch |
Unknown Keyword | RC1-2902-000CN | Lower access door link rod |
Unknown Keyword | RU5-2265-000CN | Small compression grounding spring - Located on the upper rear side of printer chassis |