Keyword |
Part Number |
Description |
| RB2-5526-000CN | Cartridge guide - Plastic structure with cartridge guide slot molded into it - Mounts on the upper front side of the registration assembly |
| RB2-5529-000CN | Chassis foot - Support for left side of printer chassis - Two used |
| RB2-5528-000CN | Connector link - Door ajar flag |
| RB3-1349-000CN | Control panel overlay - For 110V application |
| RB2-5570-020CN | Door dampener hinge mount - Left side/fuser door dampener mount (two used) |
| RB2-5690-000CN | Face up paper output tray - Face up paper output tray - Paper output tray on left side |
| RG5-5647-070CN | Face-up delivery assembly |
| RB2-5654-000CN | Front cover hinge - Hinge half that attaches to front of printer |
| RB2-5517-020CN | Front fusing assembly mount |
| RB2-5515-000CN | Front fusing rail - Front rail support for fusing assembly |
| RB2-5523-000CN | Fuser electrical contact leaf spring |
| RG5-5700-030CN | Fuser jam removal knob |
| C8519-69035 | Fusing Assembly - For 100 VAC to 127 VAC - Bonds toner to paper with heat |
| RH2-5445-000CN | High voltage power supply ribbon cable |
| RB2-5640-000CN | Laser shutter - Cartridge shutter actuator - Piece that opens cartridge shutter as it is inserted into the printer |
| RB2-5547-000CN | Left side alignment latch for front door |
| RB2-6007-000CN | Left side door - Left cover that diverter assembly attaches to |
| RB2-5689-000CN | Lower right cover - Small plastic piece below right door assembly |
| RB2-6077-000CN | Microswitch lever - Activates interlock switches from both the front and left doors |
| RB2-5661-000CN | ON/OFF switch push rod |
| 0515-4257 | Pan head screw with washer - M3.0 x 0.5, 6mm long, Number 2 Phillips |
| RB2-5522-000CN | Paper pickup guide - Plastic shaft with several fins on it - Mounts on the upper right side of the print engine frame assembly |
| RG5-5701-000CN | Rear cover assembly |
| RB2-5518-020CN | Rear fusing assembly mount |
| RB2-5516-000CN | Rear fusing rail |
| RB2-5697-000CN | Right front inside corner cover |
| RB2-5684-000CN | Right rear cover - small cover strip on rear side of right cover assembly |
| RB2-6035-000CN | Sensor flag - Long rod with forked flag toward one end and curved flag at the other - Bin full sensor flag |
| RB2-6036-000CN | Sensor flag - Short rod with two flat flags and a curved end flag - Fuser delivery flag - Mounts at the rear bottom of the support bracket in the delivery assembly |
| RF5-3404-000CN | Separation roller - For tray 1 assembly |
| RB2-5639-000CN | Shutter arm - Provides mechanical link to laser shutter |
| RB2-5660-000CN | Top left cover - Face down paper output cover - Located on the left side portion of the top cover |
| RG5-5651-030CN | Transfer guide assembly (Ribbed plastic piece) - Has slot for the transfer roller assembly |
| RF5-3319-000CN | Transfer roller - Includes the long black spongy roller, roller shaft, and drive gear - Transfers static charge to the paper |
| RF5-3338-000CN | TRAY 2 ROLLER - One used as a separation roller (in the top center of the 500-sheet paper cassette tray) and the other as a pickup roller (in the center of the paper pickup assembly) |
ADF Assembly | RG5-6300-070CN | ADF main assembly |
Belt | RB2-7988-000CN | Separation belt - Gray rubber belt between the separation drive shaft and the stationary shaft - Mounts towards the entrance of the ADF paper pickup assembly (four used) |
Cable | RG5-8025-000CN | Cable assembly - Fuser power cable |
Cable | RG5-5764-000CN | Cable assembly - Grounding cable for tray 1 - Tray 1/MP tray grounding cable - From printer chassis to tray 1/MP tray |
Cable | RG5-5752-000CN | Control panel cable assembly - Connects between the control panel and the intermediate PC board |
Cable | RG5-7783-000CN | Fan connecting cable - Mounts on the rear of the printer |
Cable | RG5-7786-000CN | Fan control cable assembly - Includes the cable assembly and holder - Mounts on the rear of the printer and routes cable around the DC controller board |
Cable | RG5-8034-000CN | Fusing assembly high voltage cable and connectors |
Cable | RG5-5736-000CN | Grounding cable - Grounding cable for ADF/scanner assembly |
Cable | RG5-5722-030CN | Main cable harness and holder assembly |
Cable | RG5-8038-000CN | Multi-purpose/tray 1 cable assembly |
Cable | RG5-5735-000CN | Power supply cable - Connects between the scanner power supply board and the print engine power supply module |
Cable | RH2-5456-000CN | Ribbon cable - Connects between the ADF analog processor board (J301) in the ADF assembly and the scanner control board (J102) in the flatbed scanner assembly |
Cable | RG5-6257-000CN | Scanner controller ribbon cables (two cable set) - Interconnects the flatbed intermediate PC board (J504 and 502) to the scanner control PC board (J103 and J105) - Mounts towards the front of the scanner assembly |
Cable | RG5-7787-000CN | Upper cable guide assembly - Includes the two upper cables and support bracket - Mounts in the top of the printer |
Cap | RB2-5675-000CN | Right cover cap - Small push-in screw cover cap |
Cartridge | C8543X | HP Ultra-Precise print cartridge (Smart print cartridge) - Will print approximately 30,000 pages based on a 5% print density |
Case | RG5-7807-000CN | Intermediate PCB case assembly - Includes flatbed sensor assembly |
Caster | RB2-7709-020CN | Caster |
Caster | RB3-0304-050CN | Front swivel caster - Mounts on the bottom frame of the 2,000-sheet paper feeder assembly (two used) |
Caster | RB2-7678-030CN | Stationary rear caster - Mounts on the bottom frame of the 2,000-sheet paper feeder assembly (two used) |
Clamp | RB2-8094-000CN | Cable clamp - Holds cable in place |
Clip | RB2-7927-000CN | Glass mounting alignment clip - Used to properly align the copyboard glass in the scanner assembly cover frame - Mounts in the left rear corner of the frame (one used) |
Clip | RB2-7928-000CN | Glass mounting clip - Used to retain the copyboard glass in the scanner assembly cover frame - Mounts in the left front, right front, and right rear corners of the frame (three used) |
Clip | RB2-6495-000CN | Holder clip lock - Secures the ADF/Scanner assembly to the top of printer (four used) |
Connector | RG5-5779-030CN | Jetlink connector - Connector between tray 4 and printer engine |
Contact | RG5-5717-020CN | Toner cartridge contact assembly |
Control Panel | CC395-60102 | Control panel assembly - Control buttons and display located on top front of printer |
Cover | RB2-8048-000CN | ADF assembly front cover - Mounts on the end of the ADF main assembly structure |
Cover | RG5-6272-050CN | ADF base cover assembly - Includes the large bottom rectangular support cover for the ADF assembly with front and rear tray guides, the ADF intermediate PC board, cables, sensors, and hinges |
Cover | RB2-8060-000CN | Connector cover - Small rectangular piece that extends out from the back of the scanner assembly (two used) |
Cover | 5851-2583 | EIO slot cover - Installs on formatter boards without JetDirect PCA |
Cover | RB2-7648-040CN | Front cover and handle asembly - Plastic cover the protects the fornt side of the 2,000-sheet paper feeder tray 4 assembly |
Cover | RG5-5702-050CN | Front cover assembly - Large door above trays 2 and 3 |
Cover | RG5-5721-000CN | Front inside cover - Cover behind front drop down cover |
Cover | RB2-5685-000CN | Left back cover - Narrow strip covering the left rear corner of the printer |
Cover | RF5-3645-000CN | Left cover for the 2,000-sheet paper feeder assembly |
Cover | RB2-7651-000CN | Left rear cover for the 2,000-sheet paper feeder assembly |
Cover | RB2-8054-000CN | Left side cover - Serves as the mounting bracket for the ADF paper output tray - Mounts on the upper left side of the scanner assembly |
Cover | RG5-5705-030CN | Left upper cover - Small cover above left door |
Cover | RB2-6491-000CN | Left upper cover - Small piece above left door |
Cover | RG5-5706-000CN | Left upper cover assembly - Small rectangular cover that mounts between the top of the printer and the paper output tray |
Cover | RB2-7933-000CN | Lower front cover - Bottom of the protrusion that makes up the control panel housing - Mounts to the front of the scanner assembly |
Cover | RB2-5687-000CN | Lower left cover - Smaller plastic piece below left door and diverter assembly |
Cover | RB2-5683-000CN | Lower left front corner cover for tray 2 and 3 - Does not include power button |
Cover | RB2-5682-000CN | Lower right front corner cover for tray 2 and 3 |
Cover | RG5-6315-000CN | Rear ADF cover assembly - Includes the rear ADF electronics cover and the two hinge covers |
Cover | RF5-3644-020CN | Rear center cover for the 2,000-sheet paper feeder assembly |
Cover | RG5-5737-090CN | Right cover assembly - Includes all components attached to this door |
Cover | RB2-7649-000CN | Right cover for the 2,000-sheet paper feeder assembly |
Cover | RB2-7650-000CN | Right rear cover for the 2,000-sheet paper feeder assembly |
Cover | RB2-8063-000CN | Right side cover - L shaped rectangular cover for the right end of the scanner assembly |
Cover | RF5-3674-000CN | Roller cover - Covers the exit delivery roller on the left side of the scanner assembly |
Cover | RG5-5811-040CN | Service cover assembly - Cover for pickup and separation rollers |
Cover | RB2-8040-000CN | Top cover assembly - `U` shaped plastic cover - Covers the top of the scanner in the ADF assembly - Mounts on the left end of the ADF assembly |
Cover | RB2-5659-000CN | Top right cover - Located on the right side portion of the top cover |
Cover | RB2-5676-000CN | Tray 1 blanking cover |
Cover | RB2-7934-000CN | Upper front cover - Top of the protrusion that makes up the control panel housing - Mounts to the front of the scanner assembly |
Cover | RF5-3695-030CN | Whiteboard cover assembly - White padded sheet mounted on a rectangular support cover - Mounts on the underside of the ADF assembly/scanner lid |
Damper | RG5-5648-020CN | Left door damper assembly - Supports drop down door on left side of printer - Two used |
Delivery | RG5-5643-080CN | Delivery assembly - Includes the curved plastic structure, various rollers and gears, and the L shaped metal support structure with three fans |
Door | RG5-5646-070CN | Left door and diverter assembly |
Drive | 0950-4753 | 40GB SATA hard drive - 5,400 RPM, 2.5 inch form factor, 9.5mm height |
Drive | RG5-5656-080CN | Drum feed drive assembly - Drives OPC drum in print cartridge |
Drive Assembly | RG5-6228-060CN | Feed drive assembly - Includes the drive motor (M303), support bracket, and the four drive gears - Mounts in the 2,000-sheet paper feeder assembly |
Drive Assembly | RG5-7789-050CN | Fuser delivery drive assembly - Includes gears, motor and microswitch for fuser drive - Also drives delivery roller |
Fan | RH7-1486-020CN | ADF cooling fan (ONLY) - Mounts on the left rear of the ADF base assembly |
Fan | RG5-6312-030CN | ADF cooling fan assembly - Includes the fan assembly, fan housing, and interconnecting cable - Mounts on the left rear of the ADF base assembly |
Fan | RH7-1623-000CN | Controller board tubeaxial fan |
Fan | RG5-6318-030CN | Cooling fan assembly - Includes fan, filter and metal grill - Mounts on the rear support frame in the left rear corner of the scanner assembly |
Fan | RG5-5645-020CN | Delivery cross member assembly - Includes the L shaped support bracket with the rear delivery fan (fan 3), front delivery fan (fan 4), and face down tray fan (fan 6) |
Fan | RH7-1659-000CN | Tubeaxial fan |
Fan | RH7-1661-000CN | Tubeaxial fan |
Fan | RH7-5306-000CN | Tubeaxial fan (#5) - Provides air to the cartridge area |
Fan | RH7-1657-000CN | Tubeaxial fan (fan 1) - Provides air to the power supply - (Fan 1) - For the power supply - Mounts on the right rear of print engine |
Fan | RH7-1658-000CN | Tubeaxial fan (fan 4) - Mounts on the upper left crossmember on the delivery assembly |
Ferrite Assembly | RB2-8678-000CN | Ferrite core assembly - Large doughnut shaped ferrite for the ribbon cable that connects the scanner control PC board to the ADF analog processor PC board |
Filter | RF5-3850-000CN | ADF optical unit air filter - Keeps dust particles from contacting the scanning lamp - Mounts on the lower rear of the ADF main assembly |
Flag | RB2-8002-000CN | Flag lever - Lever half of the sensor flag for detecting when the ADF input tray is empty - Flag part hangs down at the entrance to the ADF paper pickup assembly |
Flag | RB2-7978-000CN | Flag lever - Sensor activator half of the sensor flag for detecting when the ADF input tray is empty - Activates the sensor on the rear wall of the ADF paper pickup assembly |
Flag | RG5-6305-000CN | Registration flag and sensor holder assembly - Activates the document registration sensor on the sensor board on top of the registration guide assembly in the ADF main assembly |
Flag | RB2-6037-000CN | Sensor flag - Short rod with two flags on it - Delivery sensor flag |
Flag | RG5-6306-020CN | Timing flag and sensor holder assembly - Activates the two document skew detection sensors and the timing detection sensor on the sensor board on top of the registration guide assembly in the ADF main assembly (three used) |
Flapper | RF5-3688-020CN | Front flapper arm - Part of the paper separation mechanism for the paper pickup assembly - Mounts just in front of the front separation belts in the ADF assembly |
Flapper | RF5-3689-020CN | Rear flapper arm - Part of the paper separation mechanism for the paper pickup assembly - Mounts just in front of the rear separation belts in the ADF assembly |
Foot | RB1-6421-000CN | Chassis foot - Support for right side of printer chassis - Two used |
Fuse | VD7-2895-001CN | Fuse - 5A, 250 VAC - Mounts in the flatbed scanner power supply assembly |
Fuse | VD7-9825-000CN | Fuse - 5A, 250 VAC - Mounts in the flatbed scanner power supply assembly |
Fusing Assembly | RG5-5750-240CN | Fusing Assembly - For 100 VAC to 127 VAC - Bonds toner to paper with heat |
Fusing Assembly | RG5-5750-270CN | Fusing Assembly - For 100 VAC to 127 VAC - Bonds toner to paper with heat |
Fusing Assembly | C8519-69036 | Fusing Assembly - For 220 VAC to 240 VAC - Bonds toner to paper with heat |
Fusing Assembly | C9153-67908 | Fusing Assembly - For 220 VAC to 240 VAC - Bonds toner to paper with heat |
Fusing Assembly | RG5-5751-270CN | Fusing Assembly - For 220 VAC to 240 VAC - Bonds toner to paper with heat |
Gear | RS5-0708-000CN | 21-tooth gear |
Glass Assembly | RF5-3676-000CN | Copyboard glass assembly - Mounts in the frame on top of the scanner assembly |
Guide | RG5-6311-000CN | Cable guide assembly - Black plastic channel/cover - Mounts on the rear of the ADF main assembly |
Guide | RF5-3698-000CN | Front paper guide - Width adjustable side wall for documents placed in the ADF input tray - Mounts on top of the ADF base assembly |
Guide | RB2-8046-000CN | Lower front cable guide (I/F 1) - One of six pieces that form the pivoting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly |
Guide | RB2-8681-000CN | Lower internal cable guide (I/F 5) - One of six pieces that form the pivoting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly |
Guide | RF5-3682-000CN | Rear paper guide - Width adjustable side wall for documents placed in the ADF input tray - Mounts on top of the ADF base assembly |
Guide | RG5-5654-000CN | Transfer roller guide - Mounts to the top of the base structure of the transfer roller assembly |
Guide | RG5-6313-030CN | Upper and lower rear cable guides (I/F 2 and 3) - Two of six pieces that form the pivoting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly |
Guide | RB2-8047-000CN | Upper front cable guide (I/F 4) - Curved plastic piece - One of six pieces that form the pivoting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly |
Guide | RB2-8682-000CN | Upper internal cable guide (I/F 6) - Arm shaped ribbon cable retainer - One of six pieces that form the pivoting cable guide from the ADF assembly to the scanner assembly - Mounts on the left rear of the ADF assembly |
Handle | RB2-5828-000CN | Registration guide handle |
Handle | RB2-8015-000CN | Release handle - Used to open the ADF main assembly from the paper pickup assembly to clear paper jams - Slides on the latching shaft in the top left center of the ADF main assembly |
Hinge | RG5-6317-000CN | Hinge cover assembly - Flexible hinge with four divisions - Mounts on the rear between the ADF assembly and the scanner assembly (two used) |
Holder | RB2-8693-000CN | ADF stop holder - White plastic T shaped bumper that limits travel of the ADF main assembly mechanism - Mounts in the upper left front corner of the lower feed mechanism |
Holder | RG5-5724-050CN | Fuser connector holder assembly |
Holder | RB2-7990-000CN | Spring holder - Small Black plastic piece that holds the leaf spring against the stationary shaft in each spacer in the separation assembly - Mounts in the ADF paper pickup assembly (three used) |
Holder | RG5-5653-030CN | Transfer roller holder assembly - Includes the base structure, latch, anti-static brush, pressure springs, bushings, and contact springs - Assembly that the transfer roller mounts in |
Knob | RB2-5845-000CN | Jam removal knob - Green knurled knob used to clear paper jams from paper registration area |
Laser/Scanner | RG5-5826-090CN | Laser/Scanner assembly - Mounts on the support structure in the print engine frame assembly |
Latch | RB2-5700-000CN | Front cover latch - Roller latch that holds front cover |
Latch | RG5-5704-040CN | Latch mount assembly |
Latch | RB2-8017-000CN | Release latch - Curved plastic latch that slides on the latching shaft - Secures the ADF main assembly when the unit is in the operating position - Mounts on the front of the ADF main assembly |
Latch | RG5-5740-020CN | Right cover latch handle assembly |
Lever | RG5-5746-030CN | Cartridge release lever assembly - Lever used to release print cartridge for removal |
Lever | RB2-5813-000CN | Custom/standard media size selection switch lever - Mounts on the left side of the 500-sheet paper input tray |
Lever | RB2-7762-020CN | Paper size switching lever - To adjust paper size in tray (standard or custom size) |
Lever | RB2-7943-000CN | Sensor lever - Rotating arm with a flag at one end that protrudes through the ADF base and another at the other end that activates one of the media length sensors - Mounts on the bottom center of the ADF base assembly (two used) |
Lifter | RG5-5741-040CN | Cartridge lifter assembly |
Maintenance Kit | C9152-67907 | LaserJet 9000 series Maintenance Kit - For 120 VAC - Replacement parts after 350k pages -Includes Fusing Assembly, seven Feed/Separation rollers, two Pickup rollers and one Transfer roller |
Maintenance Kit | C9152-67906 | LaserJet 9000 series maintenance kit - For 120 VAC - Replacement parts after 350k pages -Includes fusing assembly, seven feed/separation rollers, two pickup rollers, and one transfer roller |
Maintenance Kit | C9152-69007 | Maintenance kit - For 120 VAC - Replacement parts after 350k pages - Includes fusing assembly, seven feed/separation rollers, two pick-up rollers and transfer roller |
Maintenance Kit | C9153-67907 | Maintenance Kit - For 220 VAC - Replacement parts after 350K pages - Includes, fusing assembly, seven feed/separation rollers, two pickup rollers and transfer roller |
Maintenance Kit | C9153-69007 | Maintenance Kit - For 220 VAC - Replacement parts after 350K pages - Includes, fusing assembly, seven feed/separation rollers, two pick-up rollers and transfer roller |
Memory (DIMM) | Q7718-67951 | 128MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (DIMM) | Q7719-67951 | 256MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Motor | RH7-1485-020CN | 24VDC scanner stepper motor - Provides the drive to move the scanner optical assembly back and forth - Mounts in the right rear of the scanner assembly |
Motor | RH7-1481-020CN | Deck drive motor (M303) only - Mounts in the 2,000-sheet paper feeder assembly |
Motor | RH7-1656-000CN | Drum feed drive motor |
Motor | RH7-1622-000CN | Fuser delivery motor (24 VDC) - Provides power for fuser delivery drive assembly |
Motor | RH7-1487-020CN | Motor (24 VDC) assembly - Drives the output delivery rollers - Mounts in a bracket about in the center of the rear frame of the ADF paper pickup assembly |
Motor | RH7-1488-030CN | Motor (24 VDC) assembly - Drives the paper pickup roller, feed roller, separation belt assembly, and registration rollers - Mounts at an angle in a bracket on the rear frame of the ADF paper pickup assembly |
Mount | RG5-5709-000CN | Front pressure mount for toner cartridge |
Mount | RB2-7935-000CN | Glass mount cover - Small plastic piece that covers the mounting hardware used to retain the copyboard glass - Mounts in the recesses on the scanner assembly upper front cover (two used) |
Mount | RG5-5710-000CN | Rear pressure mount for toner cartridge |
Optical Unit | RG5-6307-020CN | ADF scanner (optical) assembly - Includes the chassis assembly, scanner lens assembly (includes the Charge Coupled Device (CCD)), the scanning lamp, ADF analog processor board, and ADF inverter board - Major portion of the ADF main assembly |
Optical Unit | RG5-6263-070CN | Flatbed scanner optical assembly - Includes the support structure, lamp assembly, charge-coupled devices (CCD) and lens assembly, flatbed analog board, drive belt, and cables - Scans and digitizes documents placed on the flatbed scanner |
Overlay | RB2-6501-000CN | Control panel overlay - Right side (English) |
Overlay | CC395-60125 | Control panel overlay - Snaps on top of the control panel assembly (Arabic) |
Overlay | CC395-60135 | Control panel overlay - Snaps on top of the control panel assembly (Catalan) |
Overlay | CC395-60127 | Control panel overlay - Snaps on top of the control panel assembly (Croatian) |
Overlay | CC395-60116 | Control panel overlay - Snaps on top of the control panel assembly (Czech) |
Overlay | CC395-60113 | Control panel overlay - Snaps on top of the control panel assembly (Danish) |
Overlay | CC395-60106 | Control panel overlay - Snaps on top of the control panel assembly (Dutch) |
Overlay | CC395-60103 | Control panel overlay - Snaps on top of the control panel assembly (English) |
Overlay | CC395-60112 | Control panel overlay - Snaps on top of the control panel assembly (Finnish) |
Overlay | CC395-60108 | Control panel overlay - Snaps on top of the control panel assembly (for use in the Netherlands) |
Overlay | CC395-60104 | Control panel overlay - Snaps on top of the control panel assembly (French) |
Overlay | CC395-60124 | Control panel overlay - Snaps on top of the control panel assembly (Greek) |
Overlay | CC395-60123 | Control panel overlay - Snaps on top of the control panel assembly (Hebrew) |
Overlay | CC395-60117 | Control panel overlay - Snaps on top of the control panel assembly (Hungarian) |
Overlay | CC395-60105 | Control panel overlay - Snaps on top of the control panel assembly (Italian) |
Overlay | CC395-60121 | Control panel overlay - Snaps on top of the control panel assembly (Japanese) |
Overlay | CC395-60120 | Control panel overlay - Snaps on top of the control panel assembly (Korean) |
Overlay | CC395-60110 | Control panel overlay - Snaps on top of the control panel assembly (Norwegian) |
Overlay | CC395-60114 | Control panel overlay - Snaps on top of the control panel assembly (Polish) |
Overlay | CC395-60109 | Control panel overlay - Snaps on top of the control panel assembly (Portuguese) |
Overlay | CC395-60128 | Control panel overlay - Snaps on top of the control panel assembly (Romanian) |
Overlay | CC395-60115 | Control panel overlay - Snaps on top of the control panel assembly (Russian) |
Overlay | CC395-60139 | Control panel overlay - Snaps on top of the control panel assembly (Simplified Chinese) |
Overlay | CC395-60129 | Control panel overlay - Snaps on top of the control panel assembly (Slovak) |
Overlay | CC395-60130 | Control panel overlay - Snaps on top of the control panel assembly (Slovenian) |
Overlay | CC395-60107 | Control panel overlay - Snaps on top of the control panel assembly (Spanish) |
Overlay | CC395-60111 | Control panel overlay - Snaps on top of the control panel assembly (Swedish) |
Overlay | CC395-60126 | Control panel overlay - Snaps on top of the control panel assembly (Thai) |
Overlay | CC395-60138 | Control panel overlay - Snaps on top of the control panel assembly (Traditional Chinese) |
Overlay | CC395-60122 | Control panel overlay - Snaps on top of the control panel assembly (Turkish) |
Overlay | RB2-6500-000CN | Left side control panel overlay - Overlay that mounts next to the control panel overlay (English) |
Paper Feeder | RG5-5681-090CN | Paper input whole unit assembly - For printer/engine - Paper pickup assembly - Picks paper from Trays 2 and 3 - Includes feed rollers and paper pickup PC board |
Paper Path Module | RG5-6227-040CN | Paper path connection assembly - Directs paper from the high capacity input assembly output to the vertical input path on the print engine - - For the 3500-sheet paper feeder |
Paper Path Module | RG5-6225-100CN | Vertical registration assembly - For tray 4 |
PC Board | RH5-3078-030CN | ADF intermediate PC board - Has four cable connectors (J701, J702, J703, and J704) plus the ADF close angle detection sensor - Mounts on top of the ADF base assembly towards the center rear |
PC Board | RH5-3079-030CN | ADF sensor PC board assembly - Narrow strip PC board with the two document skew sensors, registration sensor, and timing sensor - Mounts on top of the registration guide assembly in the ADF main assembly |
PC Board | RG5-8009-000CN | Cartridge memory controller board - Between ECU and the toner cartridge memory antenna |
PC Board | RG5-6235-150CN | Controller PC board |
PC Board | Q6006-60001 | Copy connect board assembly - LVDS adapter board used to interface the flatbed scanner to the copy processor board in the printer - Mounts on the rear of the flatbed scanner assembly |
PC Board | Q6006-67901 | Copy connect board assembly - LVDS adapter board used to interface the flatbed scanner to the copy processor board in the printer - Mounts on the rear of the flatbed scanner assembly |
PC Board | Q6005-67901 | Copy processor board assembly - Includes the PC board and support carrier frame - Plugs in one of the EIO slots on the printer |
PC Board | RG5-7780-060CN | DC controller board assembly |
PC Board | RG5-8013-000CN | Delivery assembly PC board |
PC Board | RH5-3073-030CN | Flatbed intermediate PC Board - Intermediate Board between the scanner control board (J502) and the flatbed analog processor board (J501) - Mounts in the bottom of the scanner housing (below the copyboard glass) |
PC Board | CC395-67902 | Formatter (main logic) board - For HP Laserjet M9040/M9050 series |
PC Board | RH5-3165-030CN | Intermediate PCA board - Located on the scanner assembly |
PC Board | RG5-6239-020CN | LED board - Small PC board with two LEDs and a connector - For indicating the operating status |
PC Board | RG5-5719-100CN | Memory controller PC Board - Toner cartridge |
PC Board | RG5-7896-000CN | Paper pickup board |
PC Board | RG5-6238-020CN | Paper size PC board |
PC Board | RG5-6237-020CN | Paper volume sensor board |
PC Board | C8523-69011 | Scanner control PC board - Controls the scanner and ADF functions - Connects to all the drive motors in both units and all the sensors in the scanner - Mounts in rear of the scanner towards the left rear |
PC Board | RH5-3075-090CN | Scanner control PC board - Controls the scanner and ADF functions - Connects to all the drive motors in both units and all the sensors in the scanner - Mounts in rear of the scanner towards the left rear |
PC Board (Modem) | Q3701-60020 | Modem PCA - HP LaserJet analog fax accessory 300 |
Pickup Assembly | RG5-6275-060CN | ADF paper pick-up assembly - Includes the pick-up structure pieces, motors, gears, belts, rollers and solenoid - Mounts on top of the ADF base assembly towards the left end - Does NOT include the ADF main assembly |
Pickup Assembly | RG5-6208-180CN | Paper pick-up assembly - For paper input tray 4 |
Pin | RB2-5656-000CN | Pin - Located on the front cover assembly next to the roller action latch |
Plate | RG5-3850-000CN | Front paper reference plate - Front paper limit plate for 2,000-sheet feeder |
Plate | RB2-7920-000CN | Ground plate - Small plate with two tangs - Grounds the end of the carriage rod for the scanner optical assembly - Mounts on the right end of the scanner assembly towards the rear |
Plate | RB2-5679-000CN | Right side lock plate |
Power Supply | RG5-5728-100CN | High voltage power supply board |
Power Supply | C8519-69037 | High voltage power supply board - Mounts on the upper rear of the printer |
Power Supply | RG5-7778-030CN | Low voltage power supply assembly - For 100-127VAC operation - Mounts on the upper rear of the printer |
Power Supply | RM1-7354-000CN | Low voltage power supply assembly - For 220-240 VAC operation - Mounts on the upper rear of the printer |
Power Supply | RG5-6250-040CN | Power supply assembly |
Power Supply | RG1-4386-020CN | Scanner power supply assembly - Includes the power supply electronics, fan, and support bracket - Provides power for the ADF and scanner assemblies - Mounts on the rear of the scanner assembly |
Rail | RG5-5718-000CN | Cartridge guide rail - Right side toner cartridge guide rail |
Rail | RG5-5714-020CN | Left lower rail assembly |
Rail | RG5-5713-020CN | Left upper rail assembly |
Rail | RG5-5715-030CN | Right rail assembly |
Receptacle | RG5-5727-030CN | A/C power input receptacle module and power switch |
Roller | RF5-3340-000CN | Paper pick-up and feed roller assembly - Rubber roller with drive gear - Located in paper input unit (two used) |
Roller | RB2-7961-000CN | Paper pickup roller - Rubber D shaped roller - Mounts on the paper pickup drive shaft in the bottom of the ADF paper pickup assembly |
Roller | RF5-3403-000CN | Pick-up roller for optional tray 1 |
Roller Assembly | RG5-6281-020CN | Feed roller assembly - Includes a steel shaft with five rubber rollers, two bushings, a spring, and E clips - Mounts to the left of the paper pickup roller in the bottom of the ADF paper pickup assembly |
Roller Assembly | RG5-6266-030CN | Lower delivery roller assembly - Includes the support bracket with metal plate and screw - Mounts on the left end of the scanner assembly (Does not include rollers) |
Roller Assembly | RG5-6283-020CN | Pickup roller assembly - Includes a steel shaft with a rubber D shaped roller, drive gear, bushings, sensor flag, and two retaining clips - Mounts in the bottom of the ADF paper pickup assembly |
Roller Assembly | RG5-5663-060CN | Registration roller assembly |
Roller Assembly | RG5-6304-040CN | Upper registration roller guide assembly - Includes the steel shaft with four White rollers mounted in a support frame - Mounts in the lower center of the ADF main assembly |
Screw | XA9-1500-000CN | M3 pan-head Phillips screw with flat washer - 8mm long |
Screw | 0515-4679 | M3 pan-head phillips screw with washer - 6mm long |
Screw | XB4-5401-009CN | Machine screw with attached washer - M3, 10mm - Used to hold plastic to metal |
Screw | XA9-1466-000CN | Machine screw with captured washer - M3 X 29.5mm long |
Screw | XA9-0912-000CN | Machine screw with captured washer - M5 X 12 - Typically used to secure plastic parts to metal |
Screw | XB2-6300-607CN | Screw - M3 X 6mm long |
Screw | XA9-0994-000CN | Screw - M4 x 6mm long |
Screw | XA9-1448-000CN | Screw - M4 X 8mm long |
Screw | XA9-0499-000CN | Screw with captured washer - Used to fasten plastic to metal - M4 X 6mm screw |
Screw | RS5-9099-000CN | Stepped screw - Larger shoulder screw used to fasten the left side cover to the frame of the 2,000-sheet paper feeder assembly (two used) |
Screw | XA9-1495-000CN | Wafer head machine screw - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal |
Sensor | RG5-6274-000CN | ADF media width sensor assembly - Includes the white sensor gear that mates with the rack gear - Works with the front and rear width guides - Mounts on the bottom center of the ADF base assembly behind the copyboard cover assembly |
Sensor | RG5-5699-040CN | End paper sensor assembly - Contains Tray 2 and 3 paper length detection switches |
Sensor | FH7-7423-020CN | Media length sensor - Three optical sensors (PS1, PS2, and PS3) used to sense the document and the length of the media being scanned on the flatbed scanner |
Sensor | RG5-6207-060CN | Paper size sensing assembly |
Sensor | RG5-6229-040CN | Paper volume sensing assembly |
Sensor | WG8-5624-000CN | Photo-sensor (TLP1241) - Sensor flag activated |
Sensor | RG5-6285-020CN | Photo-sensor assembly - Includes the sensor and mounting bracket - Paper pickup roller home position sensor - Activated by the sensor flag on the pickup roller assembly - Mounts on the front frame of the ADF paper pickup assembly |
Sensor | FH7-7424-000CN | Scanner media size sensor - Media width size sensor (PS4) for the flatbed scanner |
Sensor | RG5-7806-030CN | Sensor assembly - Includes the support plate, number 3 document size sensor (PS4) and cable assembly - Mounts in the bottom of the scanner assembly toward the middle |
Sensor | RG5-6258-040CN | Sensor crossmember assembly - Includes the Black plastic housing, document sensor (PS1), number 1 and 2 document size sensors (PS2 and PS3), home position detector sensor (PS5), and cable assembly - Mounts in the bottom right of the scanner assembly |
Shaft | RB2-8016-000CN | Latching shaft - Long square shaft with a latching hook at one end - Used with the free release latch and release handle to secures the ADF main assembly when the unit is in the operating position |
Solenoid | RH7-5312-020CN | Solenoid (24 VDC) assembly - Activates the paper feed shutter assembly - Mounts on the rear frame of the ADF paper pick-up assembly towards the right |
Solenoid | RG5-6289-020CN | Solenoid (24 VDC) assembly - Includes the solenoid and lever arm |
Spacer | RB2-7989-000CN | Support spacer - Used to keep the separation belts tight between the drive shaft and the stationary shaft in the separation assembly - Mounts in the ADF paper pickup assembly (three used) |
Spring | RS6-2302-000CN | Compression spring - Provides tension for ON/OFF switch |
Spring | RS6-2296-000CN | Laser shutter spring - Provides tension for laser shutter |
Spring | RB2-7991-000CN | Leaf spring - Used to lock the spacer between the drive shaft and the stationary shaft in the separation assembly - Mounts in the ADF paper pickup assembly (three used) |
Spring | RS6-2299-000CN | Shutter Arm Tension Spring |
Spring | RS6-2285-000CN | Tension spring |
Spring | RS6-2298-020CN | Tension spring |
Spring | RB2-6042-000CN | Torsion spring - Provides tension for bin full flag |
Spring | RB2-5816-000CN | Torsion spring - Provides tension for paper selector switch |
Staple Cartridge | C8085-60541 | Staple cartridge - Contains 5000 staples - For the add-on staple/stacker unit |
Staple Cartridge | Q7829-67921 | Staple cartridge - Contains 5000 staples - For the add-on staple/stacker unit |
Strap | RB2-5653-000CN | Restraining strap - Drop down support for front cover assembly |
Switch | WC4-5136-000CN | Black toner cartridge switch - Detects when black cartridge is in correct position - SW644 |
Switch | WC4-5175-000CN | Micro-switch - Detects when the paper feeder/scanner assembly is open - Mounts in a support bracket on the rear frame of the ADF paper pickup assembly |
Switch | RG5-6206-030CN | Switch assembly - Custom/standard paper switch |
Transfer Assembly | RG5-5662-050CN | Transfer roller assembly - Includes both transfer guides and transfer roller |
Tray | RG5-5635-110CN | 500-sheet paper cassette - Paper cassette used for tray 2 and tray 3 |
Tray Assembly | RG5-6316-000CN | ADF paper output tray - Includes the tray with pull-out extension - Receives scanned pages from the ADF assembly - Mounts on the left side of the ADF/scanner assembly |
Tray Assembly | RG5-5809-060CN | Multi-purpose/tray 1 - Optional tray 1 drop down paper input tray assembly - Includes drop down flip output tray and paper width guides |
Tray Assembly | C8531-69018 | Tray 4 assembly (complete) - 2,000-sheet high capacity paper feeder assembly |
Tray Assembly | C8531-67908 | Tray 4 cassette assembly - 2,000-sheet high capacity paper feeder assembly - Does not include the front cover |
Weight | RB2-7999-000CN | Weight plate (Only) - Black plastic plate that drops down during the paper pickup process and pushes against the paper stack on the pickup rollers - Mounts in the ADF paper pickup assembly |
Weight | RG5-6298-000CN | Weight plate assembly - Solenoid activated plate assembly that drops down during the paper pickup process and pushes against the paper stack on the pickup rollers - Mounts in the ADF paper pickup assembly |