| Keyword |
Part Number |
Description |
|---|
| Accessory | CH971-62824 | Adhesive backed ruler - English metric ruler - 2.5m (98-inches) long and can be cut down for the 1.6m (64-inches) size - This is the ruler located with the N-up alignment pins |
| Accessory Kit | CH971-56881 | Accessory kit for the support tables - Includes all the fasteners, casters, etc needed to assemble two tables - For use with the Scitex FB910/FB950 printers |
| Belt | CH971-90710 | Carriage drive timing belt - Located between the carriage drive motor and the carriage drive shaft |
| Belt | CH971-91462 | Media belt - Includes all the support pieces and accessories used to change the belt - For use with the Scitex FB950/FB910 printers |
| Blower | CH971-91400 | Belt vacuum blower assembly - Includes one blower - Used to suck down media to belt - For the FB500/FB700/FB950/FB910 |
| Bracket | CH108-60011 | L-bracket - Located on the input, service end of the printer - Holds the supply roll and inactive foam rollers |
| Bracket | CH108-60010 | L-bracket - Located on the input, user end of the printer - Holds the supply roll and inactive foam rollers |
| Bracket | CH108-60009 | L-bracket - Located on the output, service end of the printer |
| Bracket | CH108-60008 | L-bracket and internal mechanical - Located on the on the output, user end of the printer - Includes the parts that transfer take-up motor power to the take-up spool (does not include the motor/switch assembly, the takeup drive belt, or the belt cover) |
| Bracket | CH971-57259 | Service-end bracket - Supports the lift and press rollers in the roll-to-roll option |
| Brush | CH971-62665 | Brass wire brush - Used to clean the ionizer bar |
| Button | CH971-91398 | Emergency stop button - For use with Scitex FB950/FB910 printers |
| Cable | CH971-50116 | Cable - Goes from the AC filter to the power distribution board |
| Cable | CH971-50028 | Cable - Goes from the three pin sabre connector on the AC distribution board to an AC receptacle |
| Cable | CH971-52323 | Cable - Used to connect the printer directly to a print server - For use without a hub |
| Cable | CH971-50014 | Cable assembly - Braided ribbon cable from OHS board to I/O board - For the Scitex FB500/FB700/FB910/FB950 printers |
| Cable | CH971-55682 | Cable assembly - Goes from the I/O board to the motor control board |
| Cartridge | CH133A | HP Scitex FB240 Black Ink |
| Cartridge | CH130A | HP Scitex FB240 Cyan Ink |
| Cartridge | CH130-60001 | HP Scitex FB240 Cyan ink - Instant-cure, pigmented UV inks provide durable prints for indoor or outdoor display |
| Cartridge | CH131A | HP Scitex FB240 Magenta Ink |
| Chain | CH971-91560 | Plastic track/chain - For use with Scitex FB910 and DisplayMaker 98uvx printers only |
| Clip | CH971-91001 | Clip - Connected to the trolley and provides attachment points for the carriage drive belt on both ends |
| Collar | 1500-1274 | Internal clamping collar - 25mm diameter - Used on the ends of the media drive idle roller shaft - For the Scitex FB910/FB950/FB500/FB700 printers |
| Display | CH971-91383 | LCD display assembly - Does not include the panel cover - For use with the Scitex FB910 printer only |
| Encoder | CH971-90708 | Encoder reader assembly - Located on the back of the carriage assembly |
| Encoder | CH971-91407 | Media drive encoder - Attaches to the belt drive motor on the service end of the printer - Does not include the high-resolution encoder - For the Scitex FB500/FB700/FB950/FB910 |
| Encoder | CH971-91425 | Mylar encoder strip and foam tape - It is long enough for a 2.5m (98-inch) printer and can be trimmed down for smaller printers - Part requires you to reuse the existing aluminum bar from the old strip |
| Filter | CH971-60050 | AC filter - Located inside the electronics assemblies - For use with Scitex FB910/FB950 printers |
| Filter | CH971-91421 | Air filter - For use in any location where an air filter is used (inside Vacuum Pressure (VP), inline vacuum tube, ink-blocking filter) |
| Filter | CH108-60004 | Large cylindrical air filter - Located on the exterior of the vacuum assembly |
| Guard | CH971-57318 | Finger guard - Located on the service-end (input-side) over the belt on engines without the roll-to-roll option |
| Hardware | CH971-55392 | ASSY VACUUM SWITCH GATOR INK D |
| Hardware | CH971-62414 | FITTING MALE LUER LOCK RING 1/ |
| Hardware | CH971-91219 | FRM AIR FILTER 1.0 MICRON BHIL |
| Hardware | CH971-91302 | FRM CHIMNEY FAN BHIL ROHS |
| Hardware | 0970811 | FRM MTR CARRDRV SFEMXABCDHIJ R |
| Hardware | 0971064 | FRM VALVE GENERIC ABCDHIJ ROHS |
| Hardware | CK704A | HP VIDEONET ADAPTER |
| Hardware | CH238A | KIT LINTFREE CLOTH 12 CNT |
| Hardware | CH971-62678 | LATCH DRAW SPRING LOADED |
| Hardware | CH971-62547 | Luer fitting (White) - 1/8-inch, male-taper - Used on the ink tubing |
| Hardware | CH971-62550 | Luer fitting (White) - 3/32-inch, male-taper - Used on the ink tubing |
| Hardware | CH980-00219 | NUT HEX METRIC KEPS M6 BLCK RO |
| Hardware | 0601310-012 | SCREW PPH SEMS M4 0.7 PITCH ST |
| Hardware | CH971-91414 | Side alignment fence - Attached to belt assembly |
| Hardware | CH971-62385 | TUBE TYGON 2075 0.25 ID 0.375 |
| Hardware | CH971-62374 | TUBE TYGON R-3603 0.0625 ID |
| Idler | CH971-90716 | Carriage idler assembly - Located on left end of the printer - Includes various parts and instructions describing how to remove and replace the item |
| Maintenance Kit | CH971-90854 | Grease kit - Used to lubricate gritroll bearings, media drive worm gear, and up/down threads of the media hold-down roller |
| Motor | CH971-90811 | Carriage drive motor - For Scitex printers |
| Motor | CH971-90713 | Media advance motor - Only includes the motor |
| Motor | CH971-91561 | Takeup motor and switch assembly - Used for the roll-to-roll accessory - For the Scitex FB500/FB700/FB910/FB950 |
| Mount | CH971-62834 | Flush panel mount - Recessed plastic hand-hold as used in the enclosures - For the Scitex FB910/FB950/FB500/FB700 |
| Pad | CH971-91405 | Leveling pad - For Scitex FB500/FB700/FB950/FB910 printers |
| PC Board | CH971-91389 | Motor driver board (motor control board) - Located in the electronics assembly - For the Scitex FB500/FB700/FB91O/FB950 printers |
| PC Board | CH971-91450 | Power Distribution board - Regulates the 3-phase power going into the printer |
| Pin | CH971-91402 | Alignment pin assembly - These pins are used to set position of multiple sheets - For the Scitex FB500/FB700/FB950/FB910 |
| Power Cord | CH971-56213 | Main AC power cord - For use with Scitex FB910/FB950 printers |
| Power Supply | CH971-90826 | ATX power supply - Output voltage 12VDC - Located in the main electronics box |
| Power Supply | CH971-91451 | Power supply unit - For the ionizer bar used on the ColorSpan Legacy DisplayMaker 72UVR/72UVX/98UVX, and Scitex FB910 |
| Power Supply Kit | CH971-91083 | Power supply and power plug adapter kit - Needed to implement the external auxiliary power source for IDS vacuum |
| Pressure Assembly | CH971-91198 | Vacuum/pressure assembly - For use with DisplayMaker UVR/UVX and Scitex FB910/9840 printers |
| Pressure Assembly | CH104-67002 | Vacuum/pressure assembly - Pressure pump for the Ink Delivery System (IDS) - Located on the OHS assembly |
| Printhead | CH971-91156 | Generic slave printhead - Comes pre-configured as a middle printhead, by adding or subtracting various Luer fittings (supplied), can be configured to be either a left or right slave - For the Scitex FB910 and ColorSpan Legacy DisplayMaker UV models |
| Receptacle | CH971-50021 | External AC-input receptacle (Blue) - Includes the cable from the receptacle to the AC filter |
| Reservoir | CH104-67001 | Printhead reservoir kit - For use when there is a reservoir leak, fitting problem, or other printhead issues, where jetting is not the problem - For use with any of the piezo-printhead engines |
| Ring | CH971-91224 | O-ring - Located on the ink box connector |
| Roller | CH971-91603 | Bearing media roller |
| Roller | CH971-57296 | Foam-covered metal roller - Used in two places in the roll-feed supply system - For use with Scitex FB910/FB950 printers |
| Screw | CQ114-67108 | Rubber screws - Set of 2 rubber screws to fasten blower to blower plate in the media belt vacuum trays - For the Scitex FB500/FB700 printer |
| See Description | CH971-91089 | Media spool collet - 3-inch in size - Can be hand tightened and loosened around the steel media spool |
| See Description | CH971-91344 | Restrictor - For use with all vacuum/pressure assemblies |
| See Description | CH971-91064 | Valve - Used to switch on or off the flow of ink, air or cleaning solution (the color of the wiring on this generic valve may not match the wiring color of the valve being replaced, however, they are interchangeable) |
| Sensor | CH971-62685 | Bracket height adjustment sensor - Mounting bracket for the alignment sensor that confirms that the media is straight before the pinch roller goes down |
| Sensor | CH971-91406 | Media thickness sensor assembly - Calibrated in the factory - For the Scitex FB950/FB910/FB500/FB700 printer |
| Sensor | CH971-55394 | Sensor assembly - Used to vacuum pressure in the gator ink delivery system |
| Spindle | CH971-91559 | Media spool - Does not inlcude collets - For use with 72-inch printers |
| Spindle | CH971-91558 | Media spool - Does not inlcude collets - For use with 98-inch printers |
| Spindle | CH971-91258 | Media spool - Includes two 3-inch collets - For use with 98-inch printers |
| Support | CH971-56880 | Media support table - For use with the Scitex FB910/FB950 |
| Switch | CH971-91469 | On/Off switch - Located on the electronics assembly - For the Scitex FB500/FB700/FB950/FB910 printers |
| Switch | CH154-67037 | Replacement foot switch - Orange safety hood not included - For the Scitex FB700/FB950/FB910 and H-Series |
| Switch | CH971-91444 | Switch - Configures the power distribution board for the type of 3-phase power used at the site - This switch must be set correctly before power is applied to the printer, or serious damage can occur to the printer |
| Tensioner | CH971-91562 | Supply tensioner - Used on the user-input bracket, for use with the supply and take-up system - For use with Scitex FB910/FB950 printers |
| Thermistor | CH971-91105 | Air and ink thermistors - They have been calibrated as a pair, and should be replaced as a pair |
| Tool | CH971-91572 | Belt tension tool kit - Fixture used to measure tension on the media belt - Requires a dial indicator (not included) - For the Scitex FB500/FB700/FB950/FB910 |
| Tube | CH971-91227 | U-tube - For use with ink between two printheads of a color |
| Unknown Keyword | 5064-5555 | Assy pigtail OHS inkbox IC Filter |
| Unknown Keyword | CH971-50040 | ASSY PPCA MTHRBD HAMMERHD 2 GB TAPPAN |
| Unknown Keyword | CH971-60021 | CBL PARALLEL 37 PIN 1 TO 1 3FT SHLD |
| Unknown Keyword | CH971-60078 | CBL PWR C20/C19/NEMA6-15 20A 250VAC |
| Unknown Keyword | CH971-56311 | CVR ROLLER TABLE HAMMERHEAD |
| Unknown Keyword | CH154-67028 | EBOX FILTER MEDIA KIT (FB950) |
| Unknown Keyword | CH154-67092 | FB950 CARRIAGE FILTER MEDIA KIT (FB950) |
| Unknown Keyword | CH971-91564 | FMK CAMERA GRND CBL L |
| Unknown Keyword | CH971-91614 | FMK FILTER LMP SHTTR MTR L |
| Unknown Keyword | CH971-91641 | FMK GENERAL UPDATE 12-07 L |
| Unknown Keyword | CH971-91581 | FMK HIRES ENCDR COVER L |
| Unknown Keyword | CH971-91613 | FMK PRESS TUBE REPLC L |
| Unknown Keyword | CH971-91566 | FMK RAIL FRM GRND L |
| Unknown Keyword | CH971-91413 | FRM AC PWR REG L |
| Unknown Keyword | CH971-91449 | FRM AC RELAY L |
| Unknown Keyword | CH971-91480 | FRM AIR CYL ALIGNMENT BAR L |
| Unknown Keyword | CH971-91374 | FRM ASSY CAMERA+CBLS L |
| Unknown Keyword | CH971-91386 | FRM ASSY EBOX L |
| Unknown Keyword | CH971-91616 | FRM ASSY VALVE MANIFOLD L |
| Unknown Keyword | CH971-91381 | FRM BLT MN CARRDRV L |
| Unknown Keyword | CH971-91404 | FRM BLT SHIELD L |
| Unknown Keyword | CH971-91373 | FRM BRD HEAD L |
| Unknown Keyword | CH971-91387 | FRM BRD I/O L |
| Unknown Keyword | CH971-91388 | FRM BRD UV LAMP CNTRL L |
| Unknown Keyword | CH971-91455 | FRM CABINET DOOR SW L |
| Unknown Keyword | CH971-91441 | FRM CABINET WHEEL L |
| Unknown Keyword | CH971-91385 | FRM CBL UV CTRL IGUS L |
| Unknown Keyword | CH971-91390 | FRM ENCL CARR CVR L |
| Unknown Keyword | CH971-90697 | FRM FAN DRYERTUBE KSFEMX ROHS |
| Unknown Keyword | CH971-91447 | FRM FAN EBOX COOLING L |
| Unknown Keyword | CH108-67011 | FRM FOOT SW L |
| Unknown Keyword | CQ115-67002 | FRM FOOT SWITCH U |
| Unknown Keyword | CH971-91408 | FRM HIRES ENCDR L |
| Unknown Keyword | CH971-91397 | FRM INK PUMP GENERIC L |
| Unknown Keyword | CH971-91401 | FRM INPUT ROLL HGHT ADJ L |
| Unknown Keyword | CH971-91468 | FRM INPUT/OUTPUT VAC TRAY L |
| Unknown Keyword | CH971-91452 | FRM IONIZER BAR IL |
| Unknown Keyword | CH971-91377 | FRM LAMP GLASS L |
| Unknown Keyword | CH971-91378 | FRM LFT/SER UV LMP MOD W/O CASS L |
| Unknown Keyword | CH971-91403 | FRM MEDIA ALGN BAR SYS L |
| Unknown Keyword | CH971-91461 | FRM MEDIA DETECT SNSR L |
| Unknown Keyword | CH971-91463 | FRM MEDIA MTR/REDCR L |
| Unknown Keyword | CH971-91467 | FRM MID VAC TRAY L |
| Unknown Keyword | CH971-91399 | FRM OHS BRD L |
| Unknown Keyword | CH971-91458 | FRM OUTPUT PLEXIGLASS L |
| Unknown Keyword | CH971-91412 | FRM PNEUM PRESS REG L |
| Unknown Keyword | CH971-91453 | FRM PNEUM PRESS VLV L |
| Unknown Keyword | CH971-91411 | FRM PNEUM TUBING LNG L |
| Unknown Keyword | CH971-91440 | FRM PRINTER WHEEL L |
| Unknown Keyword | CH971-91448 | FRM PWR SPLY 24VDC L |
| Unknown Keyword | CH971-91446 | FRM PWR SPLY 36VDC L |
| Unknown Keyword | CH971-91454 | FRM RAIL DOOR SW L |
| Unknown Keyword | CH971-91417 | FRM RAIL HGHT BRD L |
| Unknown Keyword | CH971-91418 | FRM RAIL HGHT ESTRP L |
| Unknown Keyword | CH971-91419 | FRM RAIL HGHT LMT SW L |
| Unknown Keyword | CH971-91610 | FRM REPACKAGING UNIVERSAL EXCHANGE |
| Unknown Keyword | CH971-91379 | FRM RT/USR UV LMP MOD W/O CASS L |
| Unknown Keyword | CH971-91437 | FRM SER SIDE CBL LOOM L |
| Unknown Keyword | CH971-91415 | FRM SER SIDE RL MTR L |
| Unknown Keyword | CH971-91409 | FRM SHOP AIR REG L |
| Unknown Keyword | CH971-91384 | FRM SPLY UV POWER L |
| Unknown Keyword | CH971-91392 | FRM SW WPSTN DRWR L |
| Unknown Keyword | CH971-91393 | FRM SW WPSTN LID L |
| Unknown Keyword | CH971-91443 | FRM TOP TROLLEY WHEELS L |
| Unknown Keyword | CH971-91465 | FRM TRACK DATA CBL L |
| Unknown Keyword | CH971-91466 | FRM TRACK PWR CBL L |
| Unknown Keyword | CH971-91372 | FRM TROLLEY L |
| Unknown Keyword | CH971-91445 | FRM USER INPUT CBL LOOM L |
| Unknown Keyword | CH971-91416 | FRM USR SIDE RL MTR L |
| Unknown Keyword | CH971-91410 | FRM USR_SIDE_PNL L |
| Unknown Keyword | CH971-91375 | FRM UV BULB L |
| Unknown Keyword | CH971-91464 | FRM VIDEONET EXT PLG L |
| Unknown Keyword | CH971-91391 | FRM WIPE STATION L |
| Unknown Keyword | CH971-91394 | FRM WPSTN DRWR+LID L |
| Unknown Keyword | CQ114-67238 | FRMBLWRBLT VACALT |
| Unknown Keyword | CH971-62845 | GUIDE LINEAR MINIATURE |
| Unknown Keyword | CH233A | HP DJ H35000/H45000 Floor Switch |
| Unknown Keyword | CK705A | HP FRM L PEN Y ADJUST BAR |
| Unknown Keyword | CH133-60002 | HP Scitex FB240 Black Ink |
| Unknown Keyword | CH133-60001 | HP Scitex FB240 Black ink profiler |
| Unknown Keyword | CH130-60002 | HP Scitex FB240 Cyan Ink |
| Unknown Keyword | CH131-60002 | HP Scitex FB240 Magenta Ink |
| Unknown Keyword | CH131-60001 | HP Scitex FB240 Magenta ink profiler |
| Unknown Keyword | CH234A | HP Scitex FB910 UV Replacement Lamp |
| Unknown Keyword | CH108-67016 | KIT LINTFREE CLOTH 12 CNT |
| Unknown Keyword | PKG-BX663 | KIT PACKAGING HAMMERHEAD S+T |
| Unknown Keyword | CH108-67012 | KIT UV LAMP CASSETTE L |
| Unknown Keyword | 0506880 | ORDER CH971-56880 |
| Unknown Keyword | 0506881 | ORDER CH971-56881 |
| Unknown Keyword | 0970697 | ORDER CH971-90697 |
| Unknown Keyword | 0901372 | ORDER CH971-91372 |
| Unknown Keyword | 0901386 | ORDER CH971-91386 |
| Unknown Keyword | 0901387 | ORDER CH971-91387 |
| Unknown Keyword | 0901389 | ORDER CH971-91389 |
| Unknown Keyword | 0901462 | ORDER CH971-91462 |
| Unknown Keyword | 0901560 | ORDER CH971-91560 |
| Unknown Keyword | 0601806-025 | SCREW SHC 1.0 PITCH SST M6 25MM LG |
| Unknown Keyword | CH971-63015 | SCREW SHC 1.0PITCH M6 ST16MM LG BLKOXIDE |
| Unknown Keyword | CH971-56544 | SHEILD RAIL HAMMERHEAD ENDODER STRIP |
| Unknown Keyword | CH971-91620 | TOOL RICKSHAW RODS L |
| Unknown Keyword | CH971-56310 | TRANSITION ROLLER TABLE HAMMERHEAD |
| Wheel | CH108-67001 | Bearing/wheel assemblies kit - For use with the Scitex FB910 printer and older carriages |