Keyword |
Part Number |
Description |
Accessory | CQ114-67186 | Accessory fasteners - Collection of various fasteners used in multiple locations on the tables and the roll-to-roll accessory - For the Scitex FB500/FB700 printers |
Accessory | CH971-62824 | Adhesive backed ruler - English metric ruler - 2.5m (98-inches) long and can be cut down for the 1.6m (64-inches) size - This is the ruler located with the N-up alignment pins |
Accessory | CQ114-67145 | Complete accessory table - The input and output accessory tables are identical - For the Scitex FB500 printer |
Accessory | CQ114-60115 | Components kit - For the Scitex FB500/FB700 printer |
Accessory | CH971-63114 | High Density Polyethylene (HDPE) funnel - 32Oz capacity - Facilitates emptying ShopVac waste ink into waste ink bottle |
Accessory | CQ114-67157 | Media spool accesory - For the Scitex FB500 roll-to-roll accessory - Does not include media collets. |
Actuator | CQ114-67094 | 75mm stroke actuator assembly - This is the actuator and all associated bracketry and hardware plus the lift encoder reader and strip - Used for the input and output media hold-down rollers and the alignment bar - For the Scitex FB500/FB700/FB950 printers |
Actuator | CQ114-67068 | Lifting actuator for the rail - For the Scitex FB500/FB700 printer |
Actuator | CQ114-67082 | Lifting motor/actuator - For the service station |
Airflow Guide | CQ114-67010 | Air valve/manifold assembly - Mounts on the rear of the carriage above the trolley - For the Scitex FB500/FB700 printer |
Bar | CQ114-67135 | 18-inch long roller bar - Used on the standard input table - For the Scitex FB500/FB700 printer |
Bar | CQ114-67140 | 32-inch long roller bar - Used on the standard output and accesory tables - For the Scitex FB500/FB700 printer |
Bar | CQ114-67071 | Anti-static ionizer bar - For the Scitex FB500 printer |
Bar | CQ114-67020 | Axis alignment bar - Bar with adjustment screws to control the Y-axis alignment of the printheads on the carriage - For the Scitex FB500/FB700 printer |
Bar | CQ114-67004 | Media alignment bar - For the Scitex FB500 printer |
Bar | CQ114-67155 | Take-up dancer roller bar (roll-to-roll accessory) - The dancer bar is the movable bar when the take-up system is operational |
Bearing | CQ114-67055 | Bearing assembly - Includes the drive roller bearing, block, and retaining ring - For the Scitex FB500/FB700 printer |
Bearing | CQ114-67056 | Bearing assembly - Includes the idler roller bearing, block, and retaining ring - For the Scitex FB500/FB700 printer |
Bearing | CQ114-67027 | Linear bearings - For rail up/down motion - For the Scitex FB500/FB700/FB950 printer |
Belt | CH971-90710 | Carriage drive timing belt - Located between the carriage drive motor and the carriage drive shaft |
Belt | CQ114-67022 | Main carriage belt (blue belt) - Includes the metal clips that attach to the belt and secure the belt to the carriage - For the Scitex FB500 printer |
Belt | CQ114-67063 | Media belt - For the Scitex FB500 printer |
Belt | CQ114-67172 | Motor belt - Drive belt between the take-up motor and the take-up spool shaft on the roll-to-roll accessory - For the Scitex FB500/FB700 printers |
Belt | CQ114-67079 | Service station wiper drive belt - For the Scitex FB500/FB700 printer |
Bezel | CQ114-67107 | Front bezel - Bezel that surrounds the LCD along with the HP insignia - For the Scitex FB500/FB700 printer |
Blade | CQ114-67077 | Doctor blade - For cleaning the service station wiper - For the Scitex FB500/FB700 printer |
Blade | CQ114-67167 | Service station wiper blade - For the Scitex FB500/FB700 printer |
Blower | CH971-91400 | Belt vacuum blower assembly - Includes one blower - Used to suck down media to belt - For the FB500/FB700/FB950/FB910 |
Bottle | CH154-67015 | Flush bottle - Squeeze bottle with label for UV flush |
Bottle | CH154-67014 | Waste ink bottle - One gallon bottle with warning label for collection of UV liquid wastes |
Bracket | CH154-00009 | Bracket - Attaches the ionizer bar to the back of the rail - Used on Scitex FB500/FB950 printers |
Bracket | CQ114-67044 | Chain bracket - Mounts to the top of the trolley plate for attaching the umbilical track - For the Scitex FB500/FB700 printer |
Bracket | CQ114-67130 | Corner bracket - Located at the top of the table stand - Two are used per table |
Bracket | CQ114-67173 | Dancer bar bracket - Small bracket that locks the dancer bar on the roll-to-roll accessory into its high position - For the Scitex FB500/FB700 printers |
Bracket | CQ114-67149 | Foam-roller bracket - Positions the roll-to-roll accessory foam rollers on the belt surface - Located on the service-side for the Scitex FB500/FB700 printer |
Bracket | CQ114-67148 | Foam-roller bracket - Positions the roll-to-roll accessory foam rollers on the belt surface - Located on the user-side for the Scitex FB500/FB700 printer |
Bracket | CQ114-00077 | Mounting bracket - For the outer cover on the input service side - For the Scitex FB500/FB700 printer |
Bracket | CQ114-00076 | Mounting bracket - For the outer cover on the input user side - For the Scitex FB500/FB700 printer |
Bracket | CQ114-67201 | Spacer/bracket - Bridges the gap between the carriage proper and the lamp housings - For the Scitex FB500/FB700 printers |
Bracket | CQ114-67152 | Supply bracket assembly - Located on service-side - Supports the media supply spool and holds the foam rollers when they are not in use - For the Scitex FB500/FB700 printer |
Bracket | CQ114-67151 | Supply bracket assembly - Located on user-side - Supports the media supply spool and holds the foam rollers when they are not in use - For the Scitex FB500/FB700 printer |
Bracket | CQ114-67154 | Take-up bracket assembly - Located on the service-side - Includes the parts related to the dancer bar assembly - For the Scitex FB500/FB700 printer |
Bracket | CQ114-67153 | Take-up bracket assembly - Located on the user-side - Includes the parts related to the dancer bar assembly - For the Scitex FB500/FB700 printer |
Brush | CQ114-67180 | Ionizer brush - Used to clean the points on the anti-static ionizer bar |
Bumper | CQ114-67207 | Adhesive-backed foam bumper - Used for the carriage drive idler |
Cable | CQ114-67147 | AC power distribution cable - Cable goes from the AC distribution board to the output for the roll-to-roll accessory (the external outlet for the RTR connection is integrated to the cable) - For the Scitex FB500/FB700 printer |
Cable | CH971-50014 | Cable assembly - Braided ribbon cable from OHS board to I/O board - For the Scitex FB500/FB700/FB910/FB950 printers |
Cable | CQ114-67039 | Cable assembly - Cable goes from the OHS board to the external 4-pin connector in the ink rack area for the white ink homogenizer |
Cable | CQ114-67033 | Cable assembly - Cable in the electronics assembly that goes from the AC distribution board to the 24 VDC vacuum power supply and to the service station ShopVac - For the Scitex FB500/FB700 printer |
Cable | CQ114-67105 | Cable assembly - Cable in the electronics assembly that goes from the AC distribution board to the relays on the I/O board (this is power cable to the Ionizer) - For the Scitex FB500/FB700 printer |
Cable | CQ114-67099 | Cable assembly - Cable runs from the back of the I/O board (J28) to many internal components, including the ebox fans, on/off switch, UVPS cable connect sense, and foot switch - For the Scitex FB500 printer |
Cable | CQ114-67035 | Cable assembly - Cable that goes from the AC distribution board to the ATX power supply - For the Scitex FB500/FB700 printer |
Cable | CQ114-67101 | Cable harness - Includes all six pump cables - Located from the OHS board to the ink pumps - For the Scitex FB500/FB700 printer |
Cable | CQ114-67203 | Camera flex cable assembly - Replacement pair of the 46cm (18-inch) flex cables connecting the camera assembly to the headboard |
Cable | CQ114-67006 | Carriage valve cable - Cable from headboard to the valve/manifold assembly - For the Scitex FB500/FB700 printer |
Cable | CQ114-67164 | Exhaust fan cable - This cable runs inside the main output-side door and provides power to the three enclosure fans in the cover - It connects to a cable that comes from J7 of the I/O board - For the Scitex FB500/FB700 printer |
Cable | CQ114-67196 | Grounding cable - This is a 320cm (126-inch) long braided cable that connects from the service side endcap to the chassis - For the Scitex FB500/FB700 printers |
Cable | CQ114-67195 | Interface cable - This is a 71cm (28-inch) long braided cable that connects from the rail to the media vacuum table main frame - Includes fastners - For the Scitex FB500/FB700 printers |
Cable | CQ114-67098 | Main AC input cable assembly - Includes the filtered AC inlet and cable/connector to the AC distribution board - For the Scitex FB500/FB700 printer |
Cable | CQ114-67036 | Ribbon cable - Ribbon cable from the I/O board to the motor driver board - For the Scitex FB500/FB700 printer |
Cable | CQ114-67051 | Serial data cable - Touch-sensitive data transmission cable - Located between the LCD control panel and the I/O board |
Cable | CQ114-67087 | Service station lifting encoder cable - For the Scitex FB500/FB700 printer |
Cable | CQ114-67061 | Tray fan cable - Cable assembly used in the belt vacuum table - For the Scitex FB500 printer |
Cable | CQ114-67031 | UV power output cable - Cable from the UVPS to the external connector on the electronics assembly for the track UV power cable - The external connector is integrated with this cable |
Cable | CQ114-67052 | VGA cable - Located between the LCD control panel and the motherboard - For the video display |
Cable (Interface) | CQ114-67179 | Interface cable - Cable that goes from the electronics assembly to the encoder interface connector - For the Scitex FB500/FB700 printers |
Camera | CQ114-67202 | Camera assembly - Includes cables and metal housing - For the Scitex FB500/FB700 printers |
Camera | CQ114-67194 | Web cam and extension cable - For the Scitex FB500/FB700 printers |
Carriage | CQ114-67109 | Carriage drive assembly - Includes bracket, motor, drive shaft, timing belt, and all related fasteners - For the Scitex FB500/FB700 printer |
Caster | CQ114-67131 | Table caster assembly - Includes wheel with threaded shaft, mounting bracket, black hand knob, wingnut, and related fasteners - Used on all sizes/versions of the media support |
Clamp | CQ114-67045 | Clamp kit - Clamp parts used at rail/track attachment and at the track/carriage attachment - For the Scitex FB500/FB700 printer |
Cleaner | CQ114-67181 | Cleaner - Includes only one unit - Chemswab for cleaning the encoder ring |
Control Panel | CQ114-67054 | Touch-sensitive LCD control panel - For the Scitex FB500/FB700 printer |
Coupler | CQ114-67065 | Coupler kit - Includes eight screws and two new interlock keys - Located between the media drive motor/reducer and the media drive roller - For the Scitex FB500/FB700 printer |
Cover | CQ114-67114 | Cable cover - Box like enclosure located in the interior surface of the output side (service end corner of the frame) - For the Scitex FB500/FB700 printer |
Cover | CQ114-67021 | Carriage cover - For the Scitex FB500/FB700 printer |
Cover | CQ114-67171 | Roll-to-roll belt cover - Sheet metal cap that covers the belt, gears, and pulleys in the roll-to-roll accessory - Loacted in the takeup motor area - For the Scitex FB500/FB700 printers |
Cover | CQ114-67204 | Service station shift covers - Pair of metal covers that deflect ink from the service station wiper rails |
Cover | CQ114-67132 | Vertical leg cover - The same cover is used on both left and right sides - Used on all sizes/versions of the media support - For the Scitex FB500/FB700 printer |
Door | CQ114-67198 | Input-side main center door - This is the sheet metal enclosure only - For the Scitex FB500 printer |
Door | CQ114-67197 | Output-side main center door - This is the sheet metal enclosure only - For the Scitex FB500 printer |
Door | CQ114-67192 | Service access door assembly - Includes the door, window, latch, hinge, door switch, and related fasteners - Found on the service-end enclosure - For the Scitex FB500/FB700 printers |
Drive | CQ114-67178 | Initialized Hard Disk Drive (HDD) - It contains the release softwares version that was current at the time of shipment, and so may require updating when installed on a printer - For the Scitex FB500/FB700 printers |
Enclosure | CQ114-00075 | Belt cover enclosure - Located on the service end , output side of the printer - For the Scitex FB500/FB700 printer |
Enclosure | CQ114-00074 | Belt cover enclosure - Located on the service end, input side of the printer - For the Scitex FB500/FB700 printer |
Enclosure | CQ114-00072 | Belt cover enclosure - Located on the service end, output side of the printer - For the Scitex FB500/FB700 printer |
Enclosure | CQ114-00073 | Belt cover enclosure - Located on the user end, output side of the printer - For the Scitex FB500/FB700 printer |
Enclosure | CQ114-00068 | Enclosure service endcap - Sheet metal enclosure only - For the Scitex FB500/FB700 printer |
Enclosure | CQ114-00067 | Enclosure user endcap - Sheet metal enclosure only - For the Scitex FB500/FB700 printer |
Enclosure | CQ114-67040 | OHS sheet metal enclosure - For the Scitex FB500/FB700 printer |
Enclosure | CQ114-67088 | Service station enclosure - Includes both the foam insulation within the box and all related fasteners - Enclosure that surrounds the service station ShopVac - For the Scitex FB500/FB700 printer |
Enclosure | CH154-67012 | Window enclosure - Includes pushnuts - Replacement UV-blocking windows used only on the center output-side door - For the Scitex FB500/FB700/FB950 |
Encoder | CH154-67005 | Encoder strip actuator assembly - Includes bracket - Used in all lifting assemblies and service station - For the Scitex FB950 printer |
Encoder | CQ114-67064 | High resolution encoder - This is the read-head and cable for the high-resolution encoder on the user-end of the media belt/vacuum table - For the Scitex FB500/FB700 printer |
Encoder | CH971-91407 | Media drive encoder - Attaches to the belt drive motor on the service end of the printer - Does not include the high-resolution encoder - For the Scitex FB500/FB700/FB950/FB910 |
Encoder | CH971-91425 | Mylar encoder strip and foam tape - It is long enough for a 2.5m (98-inch) printer and can be trimmed down for smaller printers - Part requires you to reuse the existing aluminum bar from the old strip |
Fan | CQ114-67007 | Cooling fan - For the back of carriage - For the Scitex FB500/FB700 printer |
Fan | CH971-91513 | Fan assembly - Cools the electronics box in the printer |
Fan | CH971-91599 | Fan assembly - Located on the top enclosure and end enclosures - For the Scitex FB500/FB700, also the Designjet H-Series |
Fan | CH971-91596 | UV lamp housing cooling fan - For the Scitex FB500/FB700/FB950, and Designjet H-series printers |
Filter | CQ114-67028 | Filter media - For the cooling fans on the electronics assembly - For the Scitex FB500/FB700 printer |
Filter | CQ114-67016 | Overfill filter and tubing assembly - For the Scitex FB500/FB700 printer |
Filter | CQ114-67188 | Replacement filter - Includes media and mesh used inside the ShopVac, as well as related fasteners - For the Scitex FB500/FB700 printers |
Glass Assembly | CH971-91594 | Quartz lamp glass - Inserts below the left or right lamp housing - For the FB500/FB700/FB950, also the Designjet H-Series |
Guard | CQ114-67205 | Belt edge guard - Found on the service end, inside the main cover, in line with the printing path of the carriage - Used to keep the end of the belt from ever interfering with carriage travel - For the Scitex FB500/FB700 printers |
Guard | 3160-4231 | Fan finger guard assembly - 92.2mm, 30 ppi filter - Includes fan guard with integrated filter holder - Used on the Scitex FB950/FB500/FB700 electronics box intake fan |
Hardware | CQ114-67026 | Cabling loom (conduit and cables) - Loom for all cables from the electronics assembly and components in the user-end removable enclosure and to the OHS board - For the Scitex FB500/FB700 printer |
Hardware | CQ114-67024 | Cabling loom (conduit and cables) - Loom for all cables from the electronics assembly to components on the service end of the printer - Only the loom bundle is available, the individual cables are not orderable - For the Scitex FB500 printer |
Hardware | CQ114-67025 | Cabling loom (conduit and cables) - Loom for all cables from the electronics assembly to components on the user end of the printer excluding devices in the user-end removable enclosure - For the Scitex FB500 printer |
Hardware | CQ114-67142 | Complete standard output table assembly - For the Scitex FB500 printer |
Hardware | CQ114-67213 | Complete track (Igus) assembly - Includes all tubes, cables, and related hardware - For the Scitex FB500 printers |
Hardware | CQ114-67085 | Drain hose - Runs from the elbow fitting on the service station basin to the spigot on the printer enclosure - For the Scitex FB500/FB700 printer |
Hardware | CQ114-67092 | Light-blocking skirt - Used on the main cover - For the Scitex FB500 printer |
Hardware | CQ114-67169 | Light-trapping louvre assembly - Found in the light-blocking tray on the user end of the printer - For the Scitex FB500/FB700 printers |
Hardware | CQ114-67158 | Media collet assembly - The collet is for 3-inch cardboard cores only - This is a single media collet used on the media spools in the roll-to-roll accessory - Two collets are used per spool - For the Scitex FB500 printer |
Hardware | CQ114-67133 | Metal transition piece - Attached to the input and output tables to bridge from the table to the printer belt |
Hardware | CQ114-67089 | ShopVac for the service station - For the Scitex FB500/FB700 printer |
Hardware | CQ114-67143 | Table top assembly - For the output and accessory tables - For the Scitex FB500 printer |
Hardware | CQ114-67014 | Trolley assembly (upper and lower plates) - For the Scitex FB500/FB700 printer |
Hardware | CQ114-67015 | Upper trolley plate with wheels - For the Scitex FB500/FB700 printer |
Hardware | CQ114-67096 | White-ink homogenizer (shaker) assembly - Mounts on the ink rack - For the Scitex FB500/FB700 printer |
Hardware Kit | CQ114-67168 | Drain fitting kit - Includes the elbow on the service station basin, the spigot on the printer frame, and associated hardware - Does not include the hose between the basin and the spigot |
Hardware Kit | CQ114-67217 | Hardware kit - This kit complements the Uptime Kit |
Head Assembly | CQ114-67012 | Headboard assembly - Includes the protective bracket and all related hardware - For the Scitex FB500/FB700 printer |
Holder | CQ114-67002 | Carriage hold-down kit - For shipping Scitex FB500/FB700 printers. |
Holder | CQ114-67159 | Spool holder assembly - Spool-holding puck with bearings found on the RTR accessory - Holds the media spool in place between the user-end and service-end bracket assemblies |
Housing | CQ114-67017 | Service-side lamp housing - It does not include a bulb - For the Scitex FB500 printer |
Housing | CQ114-67018 | User-side lamp housing - It does not include a bulb - For the Scitex FB500 printer |
Idler | CQ114-67111 | Idler assembly - Located on the service-end of the rail - For the Scitex FB500/FB700 printer |
Idler | CQ114-67156 | Take-up idler assembly - This is the fixed roller bar for the Scitex FB500 roll-to-roll accessory - The fixed roller remains stationary when the take-up system is operational |
Ink Delivery System | CQ114-67038 | Ink-delivery-system (IDS) vacuum assembly (silver box) - With external white air filter - For the Scitex FB500/FB700 printer |
Ink System Kit | CQ114-67106 | Ink pump assembly - Includes tubing, quick disconnect to box, check valve, and Torx fasteners for installation - For the Scitex FB500/FB700 printer |
Ink Tubes Assembly | CQ114-67214 | Ink tube kit - Bundle of four ink tubes (CMYK) for replacement in the ALT Igus assembly only - For the Scitex FB500 printers |
Ink Tubes Assembly | CQ114-67215 | Ink tube kit - Includes two ink tubes (lm-lc/white) and both air tubes (vacuum/ pressure) for replacement in the ALT Igus assembly only - For the Scitex FB500 printer |
Input Assembly | CQ114-67141 | Standard input table assembly - For the Scitex FB500 printer |
Interface | CQ114-67170 | High resolution read-head interface connector - The read-head cable inserts into this connector - For the Scitex FB500/FB700 printers |
Lamp | CQ114-67093 | LED lamp assembly - Located in the service station area |
Lamp | CH231A | UV lamp/bulb - For the Designjet H-Series and the Scitex FB950/FB500/FB700 |
Latch | CQ114-67086 | Latch mechanism - For securing the service station basin/tray to the frame mount - For the Scitex FB500/FB700 printer |
Latch | CQ114-67137 | Slam latch kit - Includes fasteners, brackets and offset plates as well as the two latches and connecting cable - For the Scitex FB500 media support tables. |
Latch | CQ114-67136 | Table latch kit - Used to replace any single latch and/or receiver piece for connecting tables together or for connecting a table to the printer - For the Scitex FB500/FB700 printer |
Module | CQ114-67037 | Ink-delivery-system (IDS) vacuum accumulator module - Resembles a blue filter housing - For the Scitex FB500/FB700 printer |
Motor | CH971-90811 | Carriage drive motor - For Scitex printers |
Motor | CH154-67008 | Media drive motor/reducer assembly - For the Scitex FB950/FB500/FB700 printer |
Motor | CH971-91533 | Service station wiper motor - Moves the wiper head in the Y axis - For the Scitex FB500/FB700/FB950, also the Designjet H-Series |
Motor | CH971-91561 | Takeup motor and switch assembly - Used for the roll-to-roll accessory - For the Scitex FB500/FB700/FB910/FB950 |
Mount | CH971-62834 | Flush panel mount - Recessed plastic hand-hold as used in the enclosures - For the Scitex FB910/FB950/FB500/FB700 |
Mount | CQ114-67075 | Service station frame mount assembly - This is the part that stays in place on the printer chassis when the tray/basin is opened - For the Scitex FB500/FB700 printer |
Pad | CH971-91405 | Leveling pad - For Scitex FB500/FB700/FB950/FB910 printers |
PC Board | CQ114-67030 | I/O board assembly - Includes the metal bracket - For the Scitex FB500/FB700 printer |
PC Board | CQ114-67199 | Motherboard assembly - Includes the motherboard, processor, and RAM - For the Scitex FB500/FB700 printers |
PC Board | CH971-91389 | Motor driver board (motor control board) - Located in the electronics assembly - For the Scitex FB500/FB700/FB91O/FB950 printers |
PC Board | CQ114-67043 | OHS circuit board - Communicates with the ink profilers and the I/O board and powers the ink pumps - For the Scitex FB500/FB700 printer |
PC Board | CH971-91512 | Power distribution board - Routes inbound AC to the various printer power supplies - For the Scitex FB500/FB700, and the Designjet H-Series |
Pin | CH971-91402 | Alignment pin assembly - These pins are used to set position of multiple sheets - For the Scitex FB500/FB700/FB950/FB910 |
Power Cord | CH154-50005 | AC power cord - 4.6 meters (15 feet) long - AC power cord from the electronics assembly to the service station ShopVac - For Scitex FB500/FB700/FB950 |
Power Cord | CQ114-67034 | Power cable - Goes from the AC distribution board to the UVPS (One wire goes to the UVPS, the other wire goes to the AC relay) - For the Scitex FB500 printer |
Power Cord | CQ114-67211 | Power cable - Long power cable that goes from the electronics board to the LCD - Includes an additional short extension, to facilitate disconnecting the cable from the LCD if the endcap needs to be completely detached from the printer |
Power Cord | 8120-6899 | Power cord - Has CEE 7/7 (M) plug for power input and C19 (F) plug for power output - 4.5m (14.8ft) long (for most European countries, Korea, Indonesia, Portugal, Germany, Spain, France, Italy and Arabic countries) - (E7809A) |
Power Cord | 8120-6903 | Power cord (Black) - 12 AWG, three conductor, 4.5m (14.8ft) long - Has NEMA L6-20P locking-type (M) plug and IEC C19 straight (F) receptacle (For 220-250VAC in the United States, Canada, and Japan) - (Feller and Neumayer L6/20-SJT3X12AWG-C19/4.5M) - (E7803A) |
Power Cord | 8120-6895 | Power cord (Black) - 15 AWG, 4.5m (14.8ft) long - Has a stripped end for power input and straight C19 (F) receptacle for power output |
Power Supply | CQ114-67146 | ATX power supply - 12 VDC - Used in the electronics assembly - For the Scitex FB500/FB700 printer |
Power Supply | CQ114-67100 | Electronics box power supply - 24 VDC - Located in the electronics assembly, for the IDS vacuum pump only - For the Scitex FB500/FB700 printer |
Power Supply | CQ114-67070 | Power supply - For the anti-static ionizer bar, mounted to the rail - For the Scitex FB500/FB700 printer |
Power Supply | CQ114-67032 | Power supply unit - 24/38 VDC dual-channel power supply located in the electronics assembly - For the Scitex FB500/FB700 printer |
Power Supply | CH971-91507 | UV power supply - For the Scitex FB500, also used in some models of the Designjet H-Series |
Power Supply Kit | CH971-91083 | Power supply and power plug adapter kit - Needed to implement the external auxiliary power source for IDS vacuum |
Pressure Assembly | CH104-67002 | Vacuum/pressure assembly - Pressure pump for the Ink Delivery System (IDS) - Located on the OHS assembly |
Printhead | CQ114-67019 | Printhead - Includes replacement O-rings and fasteners - For the Scitex FB500/FB700 printer |
Relay | CH971-91586 | AC relay - Located in the main electronics box |
Reservoir | CQ114-67005 | Carriage ink reservoir - Includes the reservior assembly, tubing, attachment plates, and associated hardware - For the Scitex FB500/FB700 printer |
Ring | CQ114-67066 | Media encoder ring - Includes a high accuracy dial indicator required for replacement of the part - High resolution media drive encoder ring, located on the user end of the drive roller. |
Ring | CQ114-67216 | O-ring set - Pair of the small O-rings used between the printhead and the ink barbs on the bottom of the carriage - For the Scitex FB500/FB700 printers |
Roller | CQ114-67095 | Media hold-down roller - For the Scitex FB500 printer |
Roller | CQ114-67060 | Media idler roller - Located on the input side - For the Scitex FB500 printer |
Roller | CQ114-67134 | Roller table - 162.5cm (64in) x 45.7cm (18in) size - Sheet metal cover used for the standard input table only - For the Scitex FB500 printer |
Roller | CQ114-67139 | Roller table - 162.5cm (64in) x 81.3cm (32in) size - Sheet metal cover used for the standard output table and the accesory table - For the Scitex FB500 printer |
Roller Assembly | CQ114-67150 | Foam roller assembly - For the roll-to-roll accessory - For the Scitex FB500 printer |
Screw | CQ114-67108 | Rubber screws - Set of 2 rubber screws to fasten blower to blower plate in the media belt vacuum trays - For the Scitex FB500/FB700 printer |
Sensor | CQ114-67009 | Carriage home sensor kit - Includes mounting bracket and cable, does not include the flag attached to the rail - For the Scitex FB500/FB700 printer |
Sensor | CQ114-67162 | Main carriage drive encoder sensor - Includes integrated cable, mounting bracket and associated hardware - For the Scitex FB500/FB700 printer |
Sensor | CH971-91406 | Media thickness sensor assembly - Calibrated in the factory - For the Scitex FB950/FB910/FB500/FB700 printer |
Sensor | CQ114-67023 | Optical media-out detection sensor - Located on the input side of the printer - Two are used on the printer, one at center and one at the user end - For the Scitex FB500/FB700/FB950 printer |
Sensor | CH971-57774 | Sensor flag - Home sensor flag that attaches to the rail at the service end - For the Scitex FB500/FB700/FB950 printers |
Sensor | CQ114-67078 | Service station height sensor - A part of the wiper assembly - For the Scitex FB500/FB700 printer |
Service Station | CQ114-67074 | Complete service station assembly - For the Scitex FB500/FB700/FB950 printer |
Service Station | CQ114-67076 | Service station tray/basin assembly - This is the part that opens out from the printer when the clasp is released - For the Scitex FB500/FB700 printer |
Shaft | CQ114-67110 | Carriage drive shaft - Shaft is knurled to prevent pulley from slipping on the shaft - For the Scitex FB500/FB700/FB910/FB950 printer |
Shield | CQ114-67163 | Exhaust fan shield - Light-blocking shield for each of the enclosure fans except for the service endcap - For the Scitex FB500/FB700 printer |
Shield | CQ114-67185 | Light-blocking shield - Used with the pair of fans in the service endcap |
Shipping Material/Carton | CQ114-67209 | Repackaging kit - Includes the carriage restraint and instructions - For the Scitex FB500 printer |
Shock (Gas Spring) | CQ114-67144 | Gas shock kit - Gas shock and associated brackets/fasteners found on the accessory tables only - For the Scitex FB500 printer |
Spring | CQ114-67190 | Main cover gas spring - Includes only one spring - Used to hold open the main cover |
Strip | CQ114-67083 | Lifting encoder strip assembly - Includes the minimum/maximum flag assembly used in the service station - For the Scitex FB500/FB700/FB950 printer |
Strip | CQ114-67072 | Stainless-steel strips - Set of three - The carriage wheels run along the strips - Used on the rail |
Support | CQ114-67129 | Table support structure and wheels - For either of the Scitex FB500 accessory tables |
Support | CQ114-67138 | Table support structure and wheels - For either of the Scitex FB500 accessory tables |
Switch | CQ114-67193 | Door switch - Switch used on the main cover and service door, the service station latch-closed detection, and the service station wiper home switch - For the Scitex FB500/FB700 printers |
Switch | CQ114-67073 | Float switch assembly - Includes brackets - Used in the service station - For the Scitex FB500/FB700/FB950 printer |
Switch | CH971-91469 | On/Off switch - Located on the electronics assembly - For the Scitex FB500/FB700/FB950/FB910 printers |
Tape | CQ115-67051 | Foam tape - 175cm (69-inch) long - Located on top of the rail that cushions the track assembly (Igus) - This length is for any 2.5m (98-inch) printer, but may be cut down to shorter lengths for use on other machines |
Tensioner | CQ114-67160 | Supply tensioner (clutch) - The supply tensioner prevents the media supply roll from unspooling - Used in the service-end supply bracket of the roll-to-roll accessory - For the Scitex FB500/FB700 printer |
Thermistor | CQ114-67011 | Thermistor assembly - Includes a new O-ring for the reservoir - This is an assembly of the three thermistors pre-installed into the top half of the ink reservoir - For the Scitex FB500/FB700 printer |
Tool | CQ114-67210 | Alignment tool - For RTR accessory installation |
Tool | CH971-91572 | Belt tension tool kit - Fixture used to measure tension on the media belt - Requires a dial indicator (not included) - For the Scitex FB500/FB700/FB950/FB910 |
Tool | CQ114-67003 | Fasteners tool kit - Collection of various fasteners used in multiple locations on the printer - For the Scitex FB500/FB700 printer |
Tool | CH971-55984 | Head height gauge tool - This go/no-go gauge is used to set the printhead height to 0.085-inches above the surface of the media |
Tool | CQ114-67175 | Hex key (Allen wrench) tool - Suitable for accessing the printhead adjustment plate fasteners |
Tool | CQ114-67176 | Measurement tool - Standard dial indicator suitable for both carriage sabre angle and belt tension measurement |
Tool | CQ114-67189 | Spacer tool - This is a service tool used to set the correct gap between the media drive high-resolution encoder read-head and the encoder ring on the drive roller |
Tool | CQ114-67177 | Torque screwdriver - Includes hex key bits 2, 2.5, 3, 4, 5, 6(mm), and torx T25 - Used for adjusting carriage fasteners - Accepts standard 1/4-inch bits |
Tool | CQ114-67174 | Torque wrench tool - With long 5mm hex key, used to remove/install the media drive motor-roller coupler |
Tray | CQ114-67062 | Vacuum tray - With blowers and cabling used in the belt vacuum table - For the Scitex FB500 printer |
Tube | CQ114-67208 | Tube menders kit - Collection of plastic barbs that are used to join the ends of tubes (ink tubes, air vacuum tube, and air pressure tubes) together |
Tube | CQ114-67127 | Tubes assembly - Two short tubes used with the headboard pressure sensor and the air manifold - For the Scitex FB500/FB700 printer |
Wheel | CQ114-67113 | Wheel assembly - Includes the fasteners for attachment to printer - Used for moving the printer, four wheels are used per printer |
Window | CQ114-67090 | UV-blocking input side windows - Includes pushnuts for attachment to enclosure - For the Scitex FB500/FB700 printer |