| Keyword |
Part Number |
Description |
|---|
| Adapter | 789897-001 | FlexibleLOM Ethernet adapter - Four 10/100/1000 Mbps full duplex ports |
| Airflow Guide | 696238-001 | Airflow baffle - Translucent plastic baffle that mounts behind the fan cage on top of the processor heat sinks |
| Arm | 675606-001 | Cable management arm kit - Guides the power and interface cables to prevent binding when the server is slid in and out of the rack - Mounts to the rear of the rack |
| Bezel | 581330-001 | Bezel kit - Includes power bezel assembly (Carbon color), power switch plunger, unit identity (UID) button, and lightpipe power UID LED button |
| Cable | 699144-001 | Cable assembly - Mini SAS to storage |
| Cable | 408765-001 | External mini-SAS cable - 0.5m (1.64ft) - For connecting the Smart Array P800 Controller with the HP StorageWorks Modular Smart Array 60 |
| Cable | 408767-001 | External mini-SAS cable - 2.0m (6.56ft) - For use with HP Smart Array controllers and to connect drive enclosures and I/O modules using SAS cables |
| Cable | 407339-B21 | External Mini-SAS Cable, 4x 2M - For connecting the Smart Array P800 Controller |
| Cable Kit | 696242-001 | Miscellaneous cable kit - Includes mini-SAS hard drive backplane cable, primary power cable with 2x4 connectors, secondary power cable with 2x4 connectors, and sideband fan cable |
| Cage | 662526-001 | PCI riser cage - L-shaped metal structure that mounts towards the rear of the server - Capable of mounting two or three PCIe cards depending on which riser board is used (Does not include the riser board) |
| Capacitor | 660093-001 | Capacitor pack with 914mm (36 inches) long cable - Provides back up power to the flash-based write cache (FBWC) memory module for up to 80 seconds in the event of a system power failure - For use with Smart Array controllers |
| Chassis | 530929-001 | Chassis - For use with storage products |
| Control Panel | 519319-001 | Rear control panel - Includes unit identity (UID) power board, and 40cm (15.7in) longribbon cable |
| Cover | 392613-001 | Hard drive blank (cover) - To fill empty 2.5-inch small form factor (SFF) drive bay slots |
| Cover | 667276-001 | Hard drive blank (cover) - To fill empty Small Form Factor (SFF) drive bays |
| Door | 385966-001 | Front door assembly - For 10636 rack (10000 G2) - Includes hinges, front lock bar, and screws |
| Drive | 713963-001 | 300GB SAS hard disk drive (HDD) - 10,000 RPM, 2.5-inch form factor, 6.0Gb per second transfer rate, SmartDrive carrier (SC) |
| Drive | 713958-001 | 300GB SAS Hard Disk Drive (HDD) - 10,000 RPM, 2.5-inch form factor, 6Gb per second transfer rate |
| Drive (Product) | 713825-B21 | HP 300GB 10,000 RPM 6.0Gb SAS 2.5in Dual-Port (DP) Enterprise Hard Disk Drive |
| Drive (Product) | 713815-B21 | HP 300GB10,000 RPM 6.0Gb SAS 2.5in Dual-Port (DP) Entry Hard Disk Drive |
| Fan | 519325-001 | Fan assembly - For HP StorageWorks D2600 and D2700 Disk Enclosures |
| Fan | 696241-001 | Hot-plug fan module assembly - Plugs in the front accessible fan cage assembly (six used) |
| Hardware Kit | 687953-001 | Hardware blank kit - Includes an optical drive blank cover, fan blank, processor blank, and power supply blank cover |
| Hardware Kit | 662519-001 | Hardware blank kit - Includes the FlexibleLOM blank cover, PCIe riser cage blank cover, expansion slot blank cover, optical drive blank cover, and fan module blank |
| Hardware Kit | 662523-001 | Miscellaneous hardware kit - Includes fan brackets (left and right), DVD cable routing guide, DIMM side cable guide, and DVD cable retainer |
| Heat Sink | 662522-001 | Latch type heatsink assembly (standard efficiency) - Latches to the top of the processor with the heatsink retaining bracket (processor cage assembly) |
| Memory (DIMM) | 717707-001 | 16GB 2Rx4, PC3L-10600R-9 Dual in-line Memory Module (DIMM) |
| Memory (DIMM) | 745094-001 | 16GB DIMM PC3L-10600R1Gx4 IPL |
| Memory (DIMM) | 698890-001 | 16GB PC3L-10600R Dual in-line Memory Module (DIMM) |
| Memory (DIMM) | 664692-001 | 16GB, 1333MHz, PC3L-10600R-9, DDR3, dual-rank x4, 1.35V, registered dual in-line memory module (RDIMM) |
| Memory (Product) | 647901-B21 | HP 16GB 2Rx4 PC3L-10600R-9 Memory Kit |
| Memory Module | 633543-001 | 2GB flash backed write cache (FBWC) memory module, 72-bit wide - Does not include the controller board or capacitor module - For use with the P420, P421, P430, P431, and 822 Smart Array controllers |
| Module | 519324-001 | Voltage regulator module - Includes blank thermal print label |
| Panel | 696239-001 | Access panel - Top cover for the server |
| PC Board | 662524-001 | 3-slot PCIe riser board (standard) - Includes one x16 slot, and two x8 slots |
| PC Board | 519321-001 | Backplane board - Includes 25 slots for SAS drives - For HP StorageWorks D2700 Disk Enclosure |
| PC Board | 519320-001 | Disk enclosure - Input-output (I/O) module, SAS interface, small form factor (SFF) |
| PC Board | 519323-001 | Fan interconnection board - Includes thermal print label, and 26AWG 1.7cm (0.66in) long cable assembly |
| PC Board | 70-41214-T1 | Fibre Channel I/O |
| PC Board | 519322-001 | Front power unit identity (UID) interconnect board |
| PC Board | 662528-001 | Power supply backplane board assembly |
| PC Board | 801949-001 | SPS-BD SYS MLB W TRAY DL560P IVB G8S |
| PC Board | 505836-001 | Trusted Platform Module (TPM) board - Plugs in on the system I/O board - This board is not customer replaceable - It is attached to system board with a security rivet |
| PC Board (Interface) | 593742-001 | NC523SFP Ethernet 10Gb SFP+ adapter board - Supports up to 20Gb/sec full duplex data rate - Has two Small Form-factor Pluggable Plus (SFP+) ports - Requires full height x8 PCIe slot |
| Plastics Kit | 696243-001 | Plastics kit - Includes the FBWC capacitor pack cable routing guide, capacitor pack holder, and capacitor pack cable routing trough |
| Power Cord | 142258-001 | AC power distribution unit (PDU) power cord (Black) - 250VAC, 16AWG, 2.0m (6.6ft) long - Includes IEC-320 C14 (M) connector to IEC 320 C13 (F) connector |
| Power Cord | 538266-001 | Power cord (black) - 1.82m (6ft) long, 12A (Japan) |
| Power Cord | 491683-AA1 | Power cord (Black) - 3-wire, 1.83m (6ft) long (China) |
| Power Supply | 660185-001 | 1200 watt AC Common Slot (CS) 'Platinum Plus' hot-plug power supply - Installs in computer chassis as primary or redundant supply (94% efficiency) - Requires 100-240VAC at 50/60Hz - Multiple power supplies used in the sever must be the same model number |
| Power Supply | 536404-001 | 460W AC Common Slot (CS) 'Gold' hot-plug power supply - Installs in the computer chassis as primary or redundant supply (92% efficiency) - Requires 100-240VAC at 50/60Hz - Multiple power supplies used in the sever must be the same model number |
| Power Supply Kit | 656364-B21 | HP 1200 Watts common slot platinum plus hot plug power supply kit |
| Processor | 687969-001 | Intel Xeon E5-4650L Eight-Core 64-bit low power processor - 2.6GHz (Sandy Bridge-EP, 20MB Level-3 cache, Intel QuickPath Interconnect (QPI) speed 8.0 GT/s, 115W thermal design power (TDP), socket FCLGA 2011) |
| Processor Upgrade | 686832-L21 | HP E5-4650L DL560 Gen8 Factory Installed Option (FIO) Processor Kit |
| Processor Upgrade | 686832-B21 | HP E5-4650L DL560 Gen8 Processor Kit |
| Product | 686792-B21 | HP DL560 Gen8 Configure-to-order (CTO) Server |
| Product | 696195-B21 | HP DL560 Mini SAS Str to Str Cable Assembly |
| Product | 684208-B21 | HP Ethernet 1GbE 4P 331FLR Factory Installed Option (FIO) Adapter |
| Product | 593717-B21 | HP NC523SFP 10Gb 2-port Server Adapter |
| Product | 615418-B21 | HP Smart Array P822/2GB Flash-Based Write Cache (FBWC) Controller |
| Product | 488069-B21 | HP Trusted Platform Module (TPM) Option Kit |
| Rack Mount Kit | 519318-001 | Rack mount kit - 1U/2U form factor - Includes mounting hardware, and left and right sliding rails with brackets |
| Rail Kit | 692480-001 | Rack mounting rail kit - For 2U server models with Large Form Factor (LFF) drives - Includes left and right telescoping ball bearing type slide rails |
| Storage System | AJ941A | HP StorageWorks D2700 Disk Enclosure |
| Tool | 413965-001 | Torx tool - L-shaped wrench with T-15 and T-10 ends |