| Keyword |
Part Number |
Description |
|---|
| Adapter | 656091-001 | FlexibleLOM InfiniBand QDR/Ethernet 10Gb dual port 544FLR adapter - Has two Quad Small Form-factor Pluggable Plus (QSFP) ports |
| Airflow Guide | 669272-001 | Hard drive airflow baffle - Left side |
| Airflow Guide | 669273-001 | Hard drive airflow baffle - Right side |
| Airflow Guide | 632801-001 | Plastic air blocker - For DIMM modules |
| Airflow Guide | 669271-001 | Processor airflow baffle |
| Bracket | 252641-001 | Power distribution unit (PDU) bracket assembly - Includes module retention bracket, single and double check brackets, and 1U form factor mamangement core left and right brackets |
| Bumper | 260296-001 | Bumpers - For front and rear doors of Rack 10000 series except Rack S10614 - Includes 10 front door bumpers and four rear door bumpers |
| Cable | 671338-001 | Cable assembly - Mini-SAS, 4-port SAS, 1U form factor, right |
| Cable | 674332-001 | Cable assembly - USB, internal, 20cm (7.87in) long |
| Cable | 622068-001 | Cable for remote console management enablement connectivity |
| Cable | 590633-001 | DB9 null module cable - 2.5m (8.2ft) long |
| Cable | 671339-001 | Hard disk drive (HDD) controller cable assembly - 4X, small form factor (SFF) |
| Cable | 671334-001 | Hard drive temperature sensor cable |
| Cable | 693516-001 | Redundant power system (RPS) cable - 1U form factor, LT 4N6W7-01 |
| Cable | 693517-001 | Redundant power system (RPS) cable assembly - 1U form factor, RT 4N6W8-0 |
| Cable | 669284-001 | System board power cable |
| Cable Kit | 600670-001 | Cable kit - Includes power, LED, Remote Configuration Module (RCM) cables |
| Cable Kit | 576896-001 | Cable kit - Unit Identification (UID) LED, 2U form factor, G6 to RJ45 |
| Cage | 669274-001 | Hard Disk Drive (HDD) cage - 2.5-inch form factor, Small Form Factor (SFF) |
| Cage | 591926-001 | Revision and Configuration Management (RCM) blank cage |
| Capacitor | 660093-001 | Capacitor pack with 914mm (36 inches) long cable - Provides back up power to the flash-based write cache (FBWC) memory module for up to 80 seconds in the event of a system power failure - For use with Smart Array controllers |
| Capacitor | 660091-001 | Flash-backed write cache (FBWC) capacitor cable pack - Includes 30cm (12in) long cable |
| Controller | 633538-001 | Smart Array P420 controller board - PCIe x8 low profile SAS controller - Has two internal x8 wide mini-SAS ports - For up to 6Gb/sec transfer rate for SAS and SATA - Does not include memory or backup power |
| Cover | 667276-001 | Hard drive blank (cover) - To fill empty Small Form Factor (SFF) drive bays |
| Door | 385966-001 | Front door assembly - For 10636 rack (10000 G2) - Includes hinges, front lock bar, and screws |
| Drive | 642266-001 | 600GB SAS hard disk drive - 10,000 RPM, 6Gb per second transfer rate (TR), 2.5-inch small form factor (SFF), Quick Release (QR) |
| Fan | 600659-001 | System fan non-redundant - 80mm (3.14in) |
| Foot | 389462-001 | Heavy duty stabilizer (10000 G2) - 0.6mm (23.6in) - Includes insert, sleeve, eight M8 flat washers, and eight M8X30mm bolts |
| Foot | 385973-001 | Mini stabilizer (10000 G2) - 0.6mm (23.6in) - Includes side foot, M8 flat washers, and bolts |
| Handle | 385975-001 | Rear door handle (10000 G2) |
| Hardware | 590629-001 | Revision and Configuration Management (RCM) chassis kit - Includes RCM chassis, backplane board, interconnect board, micro DB9 board, 30 watts AC adapter, mini DB9 data cable, and hood label |
| Heat Sink | 709990-001 | SL200 series virtual connect (VC) processor heatsink - Includes alcohol pad and heatsink installation card |
| Heat Sink | 709991-001 | SL200 series virtual connect (VC) processor heatsink - Includes alcohol pad and heatsink installation card |
| Holder | 669291-001 | Flash-based write cache (FBWC) capacitor pack holder |
| Memory (DIMM) | 698807-001 | 8GB, 1600MHz, PC3-12800R-11, DDR3, dual-rank x4, 1.50V, registered dual in-line memory module (DIMM) |
| Memory Module | 633542-001 | 1GB flash backed write cache (FBWC) memory module, 72-bit wide - Does not include the controller board or capacitor module - For use with the P420 and P421 Smart Array controllers |
| Module | 621129-001 | s6500 Raw Device Mappings (RDM) module assembly |
| PC Board | 671343-001 | 24-slot riser board - For use with the SL230 Gen8 |
| PC Board | 696338-001 | Extended personality board - Left node - For use with SL230s Gen8 |
| PC Board | 696339-001 | Extended personality board - Right node - For use with SL230s Gen8 |
| PC Board | 733173-001 | Left extension board - Ivy Bridge (IVB) - For use with SL230s G8 |
| PC Board | 576887-001 | Revision and Configuration Management (RCM) board module assembly |
| PC Board | 733177-001 | Right personality board - Ivy Bridge (IVB), extension - For use with SL230 G8 |
| PC Board | 671624-001 | Riser board - Advanced Lights Out Manager (ALOM) |
| PC Board | 663289-001 | S6500 backplane - Power, data, high-efficiency |
| PC Board | 802612-001 | System motherboard - SL230/250/270 Ivy Bridge Gen8S |
| PDU | 571711-001 | Power distribution unit (PDU) - Performance Optimized Datacenter (POD), optimized master, 3-phase, C13 - Includes one Duratherm II label, 2.5cm (1.0in) long (International) |
| Power Cord | 142258-001 | AC power distribution unit (PDU) power cord (Black) - 250VAC, 16AWG, 2.0m (6.6ft) long - Includes IEC-320 C14 (M) connector to IEC 320 C13 (F) connector |
| Power Cord | 538266-001 | Power cord (black) - 1.82m (6ft) long, 12A (Japan) |
| Power Cord | 491683-AA1 | Power cord (Black) - 3-wire, 1.83m (6ft) long (China) |
| Power Cord | 192514-001 | Power cord and adapter cable - 250V, 2.5A - 3.7m (12ft) long - Has a 3-pin C14 (male) connector for power input and a 3-pin C5 (female) connector for output |
| Power Cord | 142258-006 | Power Distribution Unit (PDU) power cord (Black) - IEC 320 C14 (M) connector to IEC 320 C13 (F) connector - 1.37m (4.5ft) long - 250V, 16A |
| Power Supply | 660185-001 | 1200 watt AC Common Slot (CS) 'Platinum Plus' hot-plug power supply - Installs in computer chassis as primary or redundant supply (94% efficiency) - Requires 100-240VAC at 50/60Hz - Multiple power supplies used in the sever must be the same model number |
| Processor | 670523-001 | Intel Xeon E5-2670 Eight-Core 64-bit processor - 2.60GHz (Sandy Bridge-EP, 20MB Level-3 cache, Intel QuickPath interconnect (QPI) speed 8.0 GT/s, 115 watt thermal design power (TDP), FCLGA 2011-pin socket) |
| Rack Mount Kit | 600663-001 | Rack managment arm assembly - 4U narrows down to 2U |
| Rack Slide | 385969-001 | Rack Unit - For 10642 (10000 G2), 42U |
| Tray | 733172-001 | Left tray - Ivy Bridge (IVB) - For use with SL230 G8 |
| Tray | 733175-001 | Right tray - Ivy Bridge (IVB) - For use with SL230 G8 |