| Keyword |
Part Number |
Description |
|---|
| D2035B | 1.44MB, 3.5-inch floppy drive (Flint Gray bezel) |
| AC Adapter | D6138A | AC adapter for Netserver TopTools remote control card |
| Ballast | C2790A | Ballast used to provide stability to equipment racks - 30lb |
| Battery | D5955-63002 | 4.8V battery - 650mAh, nickel metal hydride (NiMH) |
| Bezel | 5064-4639 | Front panel assembly bezel - Mounts over the control panel |
| Bezel | 5064-7084 | Main bezel (pedestal version) - Covers the front of the server |
| Bezel | 5064-7050 | Main bezel (rack mount version) - Covers the front of the NetServer - Includes mounting hardware and latch |
| Bezel | 5064-9001 | Main bezel (rack mount version) - Low profile - Covers the front of the server |
| Cabinet | J1502A | Rack system/E25 - 1.25m 19in 25U rack cabinet - Has vented top, vented rear door, front/back anti-tip foot, castors, leveling feet |
| Cabinet | J1502B | Rack system/E25 - 1.25m 19in 25U rack cabinet - Has vented top, vented rear door, front/back anti-tip foot, castors, leveling feet |
| Cabinet | J1501A | Rack system/E33 - 1.6m 19in 33U rack cabinet - Has vented top, vented rear door, front/back anti-tip foot, castors, leveling feet |
| Cabinet | J1501B | Rack system/E33 - 1.6m 19in 33U rack cabinet - Has vented top, vented rear door, front/back anti-tip foot, castors, leveling feet |
| Cabinet | J1500A | Rack system/E41 - 1.96m 19in 41U rack cabinet - Has vented top, vented rear door, front/back anti-tip foot, castors, leveling feet |
| Cabinet | J1464A | Rack system/U25 - 1.25m 19in 25U rack cabinet - Has vented top, vented rear door, side cover panels, cable guide, front/back anti-tip foot, castors, leveling feet |
| Cabinet | J1466A | Rack system/U33 - 1.6m 19in 33U rack cabinet - Has vented top, vented rear door, side cover panels, cable guide, front/back anti-tip foot, castors, leveling feet |
| Cable | 5183-3443 | Floppy drive ribbon cable - 34-pin (F) connector marked `to system backplane` and a 34-pin (F) connector marked `to 3.5 inch flexible disk drive` - 61cm (24in) long - Cable F7 |
| Cable | 5183-3442 | IDE drive ribbon cable marked `D7` - 40-pin (F) connector marked `To system board` to 40-pin (F) connector `To IDE device` - 37.3cm (14.7in) long |
| Cable | 5183-3449 | Mass storage power cable (P3) - 22-pin (F) connector marked `P1` to three cable assemblies with a 14-pin (F) connector marked `P2` and four unmarked 4-pin (F) connectors - The longest cable is 50.8cm (20in) long |
| Cable | 5185-0350 | SCSI cable with twisted pair segments (C62) - Cable is marked `Int SCSI cable C62` - One 68-pin (M) connector marked `To iO board` to one 68-pin (M) connector marked `To SCSI mass storage device` - 55.2cm (21.8in) long |
| Cable | 5185-0349 | SCSI cable with twisted pair segments (C65) - Cable is marked `Int SCSI cable C65` - One 68-pin (M) connector marked `To iO board` and one 68-pin (M) connector marked `To SCSI mass storage device` - 29.2cm (11.5in) long |
| Cable | C2924C | SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 128 Ohms - 2.5m (8.2ft) long |
| Cable (Interface) | J1476B | Console switch cable - One cable used for each port - 2.4m (8ft) long |
| Cable (Interface) | J1476A | Console switch cable - One cable used for each port - 2.4m (8ft) long - From the J1473A or J1474A Console switch to the computer |
| Cable (Interface) | J1477A | Console switch cable - One cable used for each port - 4.6m (15ft) long - From the J1473A or J1474A Console switch to the computer |
| Cable (Interface) | J1477B | Console switch cable - One cable used for each port - 4.6m (15ft) long - From the J1473A or J1474A Console switch to the computer |
| Cable (Interface) | C5743A | Low Voltage Differential/Ultra2 Single-Ended SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 2.5m (8.2ft) long |
| Cable (Interface) | D6020A | SCSI interface cable - Low Voltage Differential/Ultra2 Single-Ended SCSI cable with thumbscrews on both ends - 68-pin ultra high density (M) to 68-pin high density (M) - 2.5m (8.2ft) long |
| Cable (Interface) | 5012-8342 | SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 10.0m (33ft) long |
| Cable (Interface) | C2925A | SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 10m (33ft) long |
| Cable (Interface) | C7522A | SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 10.0m (33ft) long |
| Cable (Interface) | C7522AR | SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 10.0m (33ft) long |
| Cable (Interface) | C2926A | SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 20.0m (66ft) long |
| Cable (Interface) | C5666A | SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 0.9m (3.0ft) long |
| Cable (Interface) | C5667A | SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 1.5m (4.9ft) long |
| Cable (Interface) | 413292-001 | SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 2.5m (8.2ft) long |
| Cable (Interface) | C2924A | SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 2.5m (8.2ft) long |
| Cable (Interface) | C5699A | SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 2.5m (8.2ft) long |
| Cable (Interface) | C7532A | SCSI interface cable with thumbscrews on both ends - Has 68 pin high density (M) connectors - 20.0m (65.6ft) long |
| Cable (Interface) | 5183-2682 | SCSI interface cable with thumbscrews on both ends - Has 68-pin high density (M) connectors - 20.0m (65.6ft) long - (C7532A) |
| Cable Kit | D4282B | Cable kit - Two internal SCSI cables and one adapter - Used with HP NetRAID-3si disk array controller |
| Cable Kit | 5064-7980 | Cable kit C72 - Terminated Single-Ended SCSI cable which connects a controller to one or two non hot-swap internal drives along with installation instructions - Three high density 68-pin (M) connectors - 0.9m (2.8ft) long |
| Cable Kit | 5183-3446 | Ribbon cable kit (C73) - Self-adhesive cable clamp and cable marked `External SCSI cable C73` - 68-pin (M) connector marked `to Motherboard or PCI board` to high density 68-pin (F) connector with latch clips for rear panel - 64cm (25in) long - From SCSI B connector on I/O board to rear panel |
| Cage | D6077-69000 | Hot swap mass storage cage assembly with PC boards |
| Cage | 5064-6605 | Power supply cage - Does not include power supply |
| Caster | 1490-1007 | 5.08cm (2.0-in) swivel caster (with mounting plate) |
| Caster | 5182-9416 | Fixed caster (with locking lever) |
| Cleaning Supplies | 242781-001 | Cleaning cartridge - For DDS (DAT) tape drives |
| Clip | 5183-2472 | Heat sink clip - Heat sink clip for Pentium II module - Two used |
| Clip | 5042-2144 | Latch clip |
| Cover | 5064-7906 | Cover - Installed over the I/O board side of the cabinet |
| Cover | 5064-4693 | Cover - Installed over the system board side of the chassis |
| Cover | 5064-4694 | Cover - Large cover installed on both sides of a pedestal version or top and bottom of a rack mount version |
| Cover | J1508A | Side cover kit - Includes four 8U panels and two 9U panels - Panels are snap on/off molded plastic - For Rack System/E25 or U25 Cabinet |
| Cover | J1507A | Side cover kit for Rack System/E33 or U33 Cabinet - Includes six 8U panels and two 9U panels - Panels are snap on/off molded plastic |
| Cover | J1506A | Side cover kit for Rack System/E41 Cabinet - Includes eight 8U panels and two 9U panels - Panels are snap on/off molded plastic |
| Door | J1511A | Perforated, lockable front door for Rack System/E25 or U25 |
| Door | J1510A | Perforated, lockable front door for Rack System/E33 or U33 |
| Door | J1509A | Perforated, lockable front door for Rack System/E41 or /U41 |
| Drive | D2035-60282 | 1.44MB, 3.5-inch floppy drive (Flint Gray) - 1/3 height - (Part of D2035A/B) |
| Drive | P1166-69003 | 18.2GB `hot swap` Ultra3 SCSI hard drive module - 10000 RPM, low profile - Includes drive, hot swap tray, SCA extender, and bezel spacer |
| Drive | D7175-69000 | 18.2GB hot-swap Ultra2 SCSI hard drive module - 10,000 RPM - Includes drive, hot-swap tray, SCA extender, and bezel spacer - (D7175A) |
| Drive | D7031-69001 | 18.2GB hot-swap Ultra-2 SCSI hard drive module - 10,000 RPM, half height |
| Drive | D6108-69001 | 18.2GB hot-swap Ultra-2 SCSI hard drive module - 7,200 RPM, half height - Includes drive, hot-swap tray, SCA extender, and bezel spacer - (D6108A) |
| Drive | D9421-69001 | 18.2GB hot-swap Ultra3 SCSI hard drive module - 15,000 RPM, low profile - Includes drive, hot-swap tray, SCA extender, and bezel spacer - (D9421A) |
| Drive | P1216-69001 | 18.2GB hot-swap Ultra3 SCSI hard drive module - 7,200 RPM, low profile - Includes drive, hot-swap tray, SCA extender, and bezel spacer |
| Drive | P1167-69002 | 18.2GB Ultra3 Wide SCSI LVD hard drive module - 10,000 RPM, 3.5-inch form factor, 1.0-inch high (Seagate ST318404LW) |
| Drive | D7176-69001 | 18.2GB Wide Single-Ended SCSI hard drive - 7,200 RPM |
| Drive | D7174-69000 | 18GB hot-swap Ultra2 SCSI hard drive module - 7,200 RPM - Includes drive, hot-swap tray, SCA extender, and bezel spacer |
| Drive | P1215-69001 | 18GB Ultra3 SCSI hard drive - 7,200 RPM, 3.5-inch form factor, 1.0-inch high - Comes mounted on a drive tray |
| Drive | D9419-69002 | 36.4GB `hot swap` Ultra2 SCSI hard drive module - 10000 RPM, half height - Includes drive, hot swap tray, SCA extender, and bezel spacer |
| Drive | P1169-69002 | 36.4GB Ultra3 Wide SCSI LVD hard drive module - 10,000 RPM (Seagate ST336704LW) |
| Drive | D6104-69001 | 4.2GB hot-swap Ultra2 SCSI hard drive module - 7,200 RPM |
| Drive | D4910-69001 | 4.2GB Ultra Wide SCSI hard drive - 7,200 RPM |
| Drive | P3577-69001 | 73.4GB hot-swap Ultra3 SCSI hard drive module - 10,000 RPM, half height - Includes drive, hot swap tray, SCA extender, and bezel spacer |
| Drive | D6107-69001 | 9.1GB hot-swap Ultra2 SCSI hard drive module - 10,000 RPM, low profile - Includes drive, hot-swap tray, SCA extender, and bezel spacer - (D6107A) |
| Drive | D6106-69001 | 9.1GB hot-swap Ultra2 SCSI hard drive module - 7,200 RPM, low profile - Includes drive, hot-swap tray, SCA extender, and bezel spacer |
| Drive | P1168-69003 | 9.1GB hot-swap Ultra3 SCSI hard drive module - 10,000 RPM, low profile - Includes drive, hot-swap tray, SCA extender, and bezel spacer - (P1168A) |
| Drive | P1217-69001 | 9.1GB hot-swap Ultra3 SCSI hard drive module - 7,200 RPM, low profile - Includes drive, hot-swap tray, SCA extender, and bezel spacer - (P1217A) |
| Drive | D7049-69001 | 9.1GB Ultra Wide SCSI hard drive module - 10,000 RPM |
| Drive | D4911-69001 | 9.1GB Ultra Wide SCSI hard drive module - 7,200 RPM |
| Drive | P1213-69001 | 9GB Ultra3 SCSI hard drive - 7,200 RPM, 3.5-inch form factor, 1.0-inch high |
| Drive | P1214-69002 | 9GB Ultra3 SCSI hard drive module - 10000 RPM, 3.5in form factor, low profile |
| Drive | D4389-60091 | IDE CD-ROM drive - 48X CD-ROM read (Mitsumi CRMC-FX4820T) - Has front panel headphone jack and volume control |
| Drive (Product) | C1556B | 12/24GB external SureStore DAT 24e Single-Ended Narrow SCSI-2 DAT tape drive |
| Drive (Product) | C1555B | 12/24GB SureStore DAT 24i Single-Ended Narrow SCSI-2 DAT drive |
| Drive (Product) | D7176A | 18.2GB Ultra Wide SCSI hard drive - 7,200 RPM, 3.5-inch form factor |
| Drive (Product) | D7175A | 18GB 'hot swap' Ultra2 SCSI hard drive module - 10000 RPM, low profile - Includes drive, hot swap tray, SCA extender, and bezel spacer |
| Drive (Product) | D7174A | 18GB hot swap Ultra2 SCSI hard drive module - 7200 RPM, low profile - Includes drive, hot swap tray, SCA extender, and bezel spacer |
| Drive (Product) | C1579A | 20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive |
| Drive (Product) | C1579AR | 20/40GB external SureStore DLT 40e Single-Ended Narrow SCSI-2 DLT tape drive |
| Drive (Product) | C5647A | 20/40GB SureStore DLT 40i Single-Ended Narrow SCSI-2 internal DLT drive |
| Drive (Product) | D6104A | 4.2GB hot-swap Ultra2 SCSI hard drive module - 7,200 RPM, low profile |
| Drive (Product) | D4910A | 4.2GB Wide Single-Ended SCSI hard drive - 7,200 RPM |
| Drive (Product) | C1529H | 4/8GB external SureStore DAT 8e Single-Ended Narrow SCSI-2 DAT tape drive |
| Drive (Product) | C1528H | 4/8GB SureStore DAT 8i Single-Ended Narrow SCSI-2 DAT tape drive |
| Drive (Product) | C1559C | 6x12/24GB external SureStore DAT 24x6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
| Drive (Product) | C1559D | 6x12/24GB external SureStore DAT 24x6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
| Drive (Product) | C1559DR | 6x12/24GB external SureStore DAT 24x6e Single-Ended Narrow SCSI-2 six slot magazine autoloader DAT tape drive |
| Drive (Product) | C5677B | 6x12/24GB SureStore DAT 24x6i Single-Ended Narrow SCSI-2 internal autoloader DDS-3 (DAT) tape drive |
| Drive (Product) | C5658A | 70GB SureStore DLT 70e Single-Ended Wide SCSI-2 external DLT drive |
| Drive (Product) | C5726A | 80GB SureStore DLT80E Low Voltage Differential SCSI external DLT drive |
| Drive (Product) | C5726AR | 80GB SureStore DLT80E Low Voltage Differential SCSI external DLT drive |
| Drive (Product) | D6107A | 9.1GB hot swap Ultra2 SCSI hard drive module - 10000 RPM, low profile - Includes drive, hot swap tray, SCA extender, and bezel spacer |
| Drive (Product) | D6106A | 9.1GB hot swap Ultra2 SCSI hard drive module - 7200 RPM, low profile - Includes drive, hot swap tray, SCA extender, and bezel spacer |
| Drive (Product) | D7049A | 9.1GB Ultra Wide SCSI hard drive - 10,000 RPM, 3.5-inch form factor |
| Drive (Product) | D4911A | 9.1GB Ultra Wide SCSI hard drive module - 7,200 RPM |
| Drive (Product) | D4383B | IDE CD-ROM drive with integral loading tray - 24X CD-ROM read |
| Drive (Product) | D6506A | IDE CD-ROM drive with integral loading tray - 24X CD-ROM read - Package of 10 drives |
| Drive (Product) | C5170F | SureStore 4115we 15 slot DLT library - Includes one Fast Wide SCSI DLT 4000 drive, cosmetic panels, three magazines, barcode reader, and accessories |
| Drive (Product) | C6280F | SureStore 418 8 slot DLT autoloader - Includes one Ultra SCSI DLT 4000 drive, six cartridge magazines, SCSI cable and terminator, and five data cartridges |
| Drive (Product) | C5171F | SureStore 4215WE 15 slot DLT library - Includes two Fast Wide SCSI DLT 4000 drives, cosmetic panels, three magazines, barcode reader, and accessories |
| Drive (Product) | C5175F | SureStore 4228w 28 slot DLT library with multiple Wide Differential SCSI buses - Includes two DLT 4000 drives |
| Drive (Product) | C5177F | SureStore 4448w 48 slot DLT library with multiple Wide Differential SCSI buses - Includes four DLT 4000 drives |
| Drive (Product) | C5170J | SureStore 7115WE 15 slot DLT library - Includes one Fast Wide SCSI DLT 7000 drive, cosmetic panels, three magazines, barcode reader, and accessories |
| Drive (Product) | C5171J | SureStore 7215we 15 slot DLT library - Includes two Fast Wide SCSI DLT 7000 drives, cosmetic panels, three magazines, barcode reader, and accessories |
| Drive (Product) | C5175J | SureStore 7228w 28 slot DLT library with multiple Wide Differential SCSI buses - Includes two DLT 7000 drives |
| Drive (Product) | C5177J | SureStore 7448w 48 slot DLT library with multiple Wide Differential SCSI buses - Includes four DLT 7000 drives |
| Fan | 5064-4672 | Dual fan assembly - Includes two fans mounted on a bracket/accessory board guide - Mounts near the I/O board |
| Fan | 5064-3538 | Dual fan assembly - Includes two fans mounted on a slide-in bracket - Installed in slot near the power supply |
| Fan | 5064-3531 | Processor fan and bracket assembly - Mounts on the side of the processor bracket |
| Fan | 5064-3553 | Tubeaxial fan - For the CPU board - Mounts on the rear of the chassis (Two used) |
| Fan Upgrade | D8595A | Processor Cooling Fan Accessory - Required for PIII 550/600 |
| Guide | E7723B | Cable guide for equipment racks - Mounts horizontally or vertically on rear columns of rack - 19in, package of 2 |
| Handle | 5002-5191 | Handles - For rack mount version - (Four used) |
| Hardware Kit | J1522A | Hardware kit for equipment racks - Includes ten decorative mounting screws, ten T25 Torx non-decorative mounting screws, and 20 sheet metal nuts |
| Hook | J1521A | Lifting hooks for Rack System/E or Rack System/U - Package of four hooks |
| Interface (Product) | P3482A | Gigabit LAN adapter - PCI-X 10/100/1000TX 3Com LAN card - (3Com 3C996-T) |
| Interface (Product) | D4992A | NetRAID-1 one-channel disk array controller - PCI board with one internal 68 pin high density and one external 68 pin high density Ultra wide SCSI connector |
| Interface (Product) | D5955A | NetRAID-3si three-channel disk array controller - PCI board with three internal 68 pin high density and three external 68 pin high density Ultra wide SCSI connectors |
| Interface (Product) | J2585B | PCI 32-BIT LAN interface board - Has RJ-45 connector - Supports both EtherTwist (10Base-T) and 100VG/802.12 - PCI 32-Bit LAN Interface Board - has RJ-45 Connector - Supports Both Ethertwist (10BASE-T) & 100VG/802.12 (J2585B, 1/6 of J3009B, 1/24 of J3010B) |
| Interface (Product) | D6028A | TopTools remote control card with battery (Version 1) - Allows emergency remote access using LAN or modem |
| Interface (Product) | P1218A | TopTools remote control card with battery (Version 2.0) - Allows emergency remote access using LAN or modem |
| Keyboard | D4950-63006 | `Windows 95` keyboard assembly (Quartz gray, 104 key) - Has attached 2m cable with 6 pin mini DIN connector (Dutch) |
| Keyboard | D4950-63021 | `Windows 95` keyboard assembly (Quartz gray, 104 key) - Has attached 2m cable with 6 pin mini DIN connector (Korean-Hangul) - Windows 95 Keyboard Assembly (Quartz Gray, 104 Key) - has Attached 2m Cable with 6 Pin Mini DIN Connector (D4950B Opt AB1, Korean-Hangul) |
| Keyboard | C4739-60109 | `Windows Vista` keyboard assembly (Quartz Gray, 105 key) - Has attached 1.8M cable with 6-pin (Violet) mini DIN connector (Option ABN, Norwegian) |
| Keyboard | C4739-60125 | `Windows` keyboard assembly (Quartz Gray, 105 key) - Has attached 1.8M cable with 6-pin (Violet) mini DIN connector (Option AB6, Arabic-French) |
| Keyboard | C4739-60133 | `Windows` keyboard assembly (Quartz Gray, 105 key) - Has attached 1.8M cable with 6-pin (Violet) mini DIN connector (Option AB7, Greek) |
| Keyboard | C4739-60119 | `Windows` keyboard assembly (Quartz Gray, 105 key) - Has attached 1.8M cable with 6-pin (Violet) mini DIN connector (Option AB9, European-Portuguese) |
| Keyboard | C4739-60120 | `Windows` keyboard assembly (Quartz Gray, 105 key) - Has attached 1.8M cable with 6-pin (Violet) mini DIN connector (Option ABV, Arabic-English) |
| Keyboard | C4739-60114 | `Windows` keyboard assembly (Quartz Gray, 105 key) - Has attached 1.8M cable with 6-pin (Violet) mini DIN connector (Option ABW, Belgium-Flemish) |
| Keyboard | C4739-60116 | `Windows` keyboard assembly (Quartz Gray, 105 key) - Has attached 1.8M cable with 6-pin (Violet) mini DIN connector (Option ABY, Danish) |
| Keyboard | C4739-60130 | `Windows` keyboard assembly (Quartz Gray, 105 key) - Has attached 1.8M cable with 6-pin (Violet) mini DIN connector (Option ACB, Russian-Cyrillic) |
| Keyboard | C4739-60137 | `Windows` keyboard assembly (Quartz Gray, 105 key) - Has attached 1.8M cable with 6-pin (Violet) mini DIN connector (Option AKC, Hungarian) |
| Keyboard | 319603-001 | Battery for real-time clock (RTC) - 3.0V, 220mAh, lithium coin cell, 20mm diameter, 3.2mm height (CR2032) |
| Keyboard | 435302-071 | PS/2 `Windows` keyboard assembly (Silver and Carbonite Black) - Has attached 1.8m (6.0ft) cable with 6-pin mini-DIN connector (Spanish) |
| Keyboard | 537745-001 | Standard PS/2 Windows keyboard (Jack Black color) - Has 104-key layout, attached 1.8M (6.0ft) cable with DIN connector - For USA |
| Keyboard | 537745-121 | Standard PS/2 Windows keyboard (Jack Black color) - Has 104-key layout, attached 1.8M (6.0ft) cable with DIN connector (French Canadian) |
| Keyboard | A7861-65452 | USB keyboard with PC-104 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (Traditional Chinese) |
| Keyboard | A7861-65450 | USB keyboard with PC-106 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (Korean) - Equivalent replacement for the HP-UX 'VISUALIZE' keyboard |
| Keyboard | C4739-60144 | Windows` keyboard assembly (Quartz Gray, 105 key) - Has attached 1.8m (6.0ft) cable with 6-pin (Violet) mini-DIN connector (Option AKB, Czechoslovakian) |
| Label Kit | Q2004A | DLTtape IV bar code labels - Package of 100 data cartridge labels and 10 cleaning labels |
| Magazine | C5148F | 5 slot removable DLT magazine pre-loaded with 5 DLTape IV tape cartridges |
| Magazine | C5148FR | 5 slot removable DLT magazine pre-loaded with 5 DLTape IV tape cartridges |
| Magazine | C6289J | 6 slot removable DLT magazine pre-loaded with 6 DLTape IV tape cartridges |
| Magazine | C5149F | Empty 5 slot removable DLT magazine |
| Magazine | C6288J | Empty 6 slot removable DLT magazine |
| Magazine | C6280-60026 | Empty six slot removable DLT magazine - (C6288J) |
| Memory (DIMM) | D6098-69001 | 128MB, 100MHz registered ECC SDRAM DIMM memory module - (D6098A) |
| Memory (DIMM) | D6099-69001 | 256MB, 100MHz registered ECC SDRAM DIMM memory module - (D6099A) |
| Memory (DIMM) | D6114-69001 | 256MB, 50nS EDO DIMM memory module - Part number is for one of four modules that come in the memory upgrade kit (part of D6114A) |
| Memory (DIMM) | D4295-69001 | 32MB, 60nS, 72-bit EDO (Extended Data Output) DIMM memory module - (D4295A) |
| Memory (DIMM) | D6097-69001 | 64MB, 100MHz registered ECC SDRAM DIMM memory module - (D6097A) |
| Memory (DIMM) | D6112-69001 | 64MB, 50nS EDO DIMM memory module - Part number is for one of four modules that come in the memory upgrade kit (part of D6112A) |
| Memory (IC) | 1818-6527 | 512kB, 50ns EDO VRAM video memory IC - (Standard Vectra comes with two installed) - Plugs into socket(s) on system processor board (1MB kit is D4219A) - Can upgrade up to 2MB of video memory |
| Memory (Product) | D6114A | 1GB memory upgrade kit - Includes four 256MB, 50nS, buffered ECC EDO DIMMs - For NetServer LXr8000 and LH4 |
| Memory (Product) | D6112A | 256MB memory upgrade kit - Includes four 64MB, 50nS, buffered ECC EDO DIMMs - For NetServer LXr8000 and LH4 |
| Memory (Product) | D4295A | 32MB, 60nS, 72-bit, 168-pin, unbuffered ECC EDO DIMM memory module |
| Memory (SIMM) | D7132-63000 | 16MB SIMM memory module for NetRaid 3Si disk array controller - See D7132-69000 |
| Memory (SIMM) | 1818-7485 | 16MB, 50nS EDO (Extended Data Output) SIMM memory module - I/O memory |
| Memory (SIMM) | D7132-69000 | 64MB SIMM memory module for NetRAID 3Si disk array controller |
| Mouse | C3751B | 2 button PS/2 serial mouse (Quartz Gray) - Has attached 6ft cable with 6-pin mini-din connector |
| Mouse | C3751-60201 | PS/2 two-button serial mouse (Quartz Gray) - Has attached 6ft cable with 6-pin mini-DIN connector - (Part of C3751B) |
| Nameplate/Logo | 5064-7086 | Nameplate - NetServer LH3 series logo (rack mount) |
| Panel | J1514A | 1U rackmount filler panels - For covering the empty slots on the front of the rack cabinet - Package of 6 panels |
| Panel | 5067-4214 | Front panel assembly - Includes power button, reset button, keyboard lock, LCD display, status LED`s |
| PC Board | D5000-69001 | I/O board - Contains ISA and PCI accessory slots - I/O Board - Contains ISA and PCI Accessory Slots - One of the Large Boards in Center of Chassis |
| PC Board | D5000-69002 | Power management PC board - Power management and backplane PC board |
| PC Board | D5000-69000 | System processor board - With Super VGA, IDE, dual Ultra2 SCSI controllers, Ultra2 to Single-Ended SCSI converter - System (Mother) Board - with Super VGA, IDE, Dual Ultra2 SCSI Controller, Ultra2 to Single-Ended SCSI Converter - One of the Large Boards in Center of Chassis |
| PC Board | 5183-3418 | Terminator board - Used in secondary processor socket for a system with only one processor |
| PC Board (Interface) | J2585-69011 | 32-bit PCI LAN interface board - RJ-45 connectors - Supports both EtherTwist 10Base-T and 100VG/802.12 - (J2585B, part of J3009B, part of of J3010B) |
| PC Board (Interface) | D5990-69000 | Fiber channel array - Redundant module with two fiber channel ports and two very high density 68-pin SCSI connectors |
| PC Board (Interface) | D5013-63003 | LAN adapter - PCI 10/100Base-TX LAN board |
| PC Board (Interface) | D4992-69001 | NetRaid-1 one-channel disk array controller - PCI board with one internal 68-pin High Density and one external 68-pin High Density Ultra Wide SCSI connector - NetRAID-1 One-Channel Disk Array Controller - PCI Board With One Internal 68 Pin High Density and One External 68 Pin High Density Ultra Wide SCSI Connector (D4992A) |
| PC Board (Interface) | D2140-69004 | NetRaid-1Si one-channel disk array controller - PCI board with one internal 68-pin High Density and one external 68-pin Ultra High Density SCSI connector - NetRAID-1Si One-Channel Disk Array Controller - PCI Board with One Internal 68 Pin High Density and One External 68 Pin Ultra High Density SCSI Connector (P/O D2140A) |
| PC Board (Interface) | D5955-69001 | NetRaid-3Si three-channel disk array controller - PCI board with three internal 68-pin High Density and three external 68-pin High Density Uultra Wide SCSI connectors |
| PDU | E7670A | 10A power distribution unit (PDU) - Has one C14 (M) power input and ten C13 (F) power outlets - For 100-240V |
| PDU | E7675A | 16A power distribution unit (PDU) - Has one C20 (M) for power input, one C13 (F) outlet, and nine 5-15R (F) outlets - For 100-127V |
| PDU | E7671A | 16A power distribution unit (PDU) - Has one C20 (M) for power input, six C13 (F) power outlets, and two C19 (F) power outlets - For 100-240V |
| PDU | E7672A | Dual power distribution unit (PDU) kit - Includes a 16A PDU, (E7671A), a 10A PDU (E7670A), and the power cord (E7742A) used to connect the E7670A to the E7671A - For 100-240V |
| PDU Switch | E7679A | PDU switch kit - Includes remote switch panel, PDU switch module with two C20 (M) plugs for power input and two C19 (F) plugs for power output - 100-127V, 16A for each circuit |
| PDU Switch | E7680A | PDU switch kit - Includes remote switch panel, PDU switch module with two C20 (M) plugs for power input, and two C19 (F) plugs for power output - 200-240V, 16A for each circuit |
| Power Cord | 8120-6961 | Daisy chain power cord (Black) - 14 AWG, 4.0m (13.1ft) long - Has (M) C20 plug for power input, and (F) C19 plug for power output - (E7804A) |
| Power Cord | 8120-6884 | Daisy chain' power cord (Black) - 15 AWG, 2.5m (8.2ft) long - Has (M) C20 plug for power input, and (F) C19 receptacle for power output - For rack mount applications |
| Power Cord | 8120-1625M | Daisy chain` power cord (Black) - 18 AWG, 2.5m (8.2ft) long - Has (M) C14 plug for power input and (F) C13 plug for power output - (E7742A) |
| Power Cord | 8120-1575 | Daisy-chain power cord (Jade Gray) - 18AWG, 76cm (30in) long - Has (M) C14 plug for power input and (F) C13 plug for power output |
| Power Cord | E7742A | Jumper (daisy chain) power cord for rack cabinets - 240V, 10A - Has C14 (M) plug for power input and C13 (F) plug for power output - 2.5m (8.2ft) long |
| Power Cord | E7743A | PDU Power cord - 120V, 10A - 2.5m (8.2ft) long with 5-15P (M) plug and straight C13 (F) receptacle (USA and Canada) |
| Power Cord | E7802A | PDU power cord - Has (M) 5-20P plug for power input and (F) C19 plug for PDU power output - 4.5m (14.8ft) long |
| Power Cord | E7807A | PDU power cord - Has (M) C14 plug for power input and (F) C15 plug that has a U shaped channel above the ground pin (For preventing use of a lower rated power cord) for power output - 0.76m (2.5ft) long |
| Power Cord | E7798A | PDU power cord - Has C20 (M) plug for power input and C19 (F) plug for PDU power output - 2.5m (8.2ft) long - 240V, 16A |
| Power Cord | E7804A | PDU power cord - Has C20 (M) plug for power input and C19 (F) plug for PDU power output - 4.0m (13.1ft) long - 240V, 16A |
| Power Cord | E7805A | PDU power cord - Has L6-30P (M) plug for power input and C19 (F) plug for PDU power output - 4.5m (14.8ft) long |
| Power Cord | 8120-4540 | Power cord - Has 5-15P (M) plug for power input and C13 (F) plug for power output - 125V, 10A, 1.8m |
| Power Cord | E7806A | Power cord - 4.5m (14.8ft) long - Has a stripped end for power input and a straight C19 (F) receptacle for power output |
| Power Cord | E7809A | Power cord - Has CEE 7/7 (M) plug for power input and C19 (F) plug for power output - 4.5m (14.8ft) long |
| Power Cord | 8120-8351 | Power cord (Black) - 12 AWG, 2.4m (8.0ft) long - Has (M) L6-30P plug for power input, and straight (F) C19 receptacle for power output - (E7799A) |
| Power Cord | 8120-6903 | Power cord (Black) - 12 AWG, three conductor, 4.5m (14.8ft) long - Has NEMA L6-20P locking-type (M) plug and IEC C19 straight (F) receptacle (For 220-250VAC in the United States, Canada, and Japan) - (Feller and Neumayer L6/20-SJT3X12AWG-C19/4.5M) - (E7803A) |
| Power Cord | E7808A | Power cord (Black) - 15 AWG, 4.5m (14.8ft) long - Has IEC-309 (M) plug for power input and straight (F) C19 receptacle (for 220V in Denmark and Switzerland) |
| Power Cord | E7803A | Power cord (Black) - 15 AWG, 4.5m (14.8ft) long - Has NEMA L6-20P (M) plug for power input and (F) C19 receptacle for power output (for the United States, Canada, and Japan) |
| Power Cord | 8120-1751 | Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 120V, 10A in the USA, Canada, Chile, Argentina, and Taiwan) |
| Power Cord | 8120-4753 | Power cord (Flint Gray) - 18 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 100VAC in Japan) |
| Power Cord | 8120-4211 | Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in South Africa and India) |
| Power Cord | 8120-2956 | Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Denmark) |
| Power Cord | 8120-2104 | Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Switzerland) |
| Power Supply | 5064-6604 | Power supply module - 300 watts |
| Power Supply Kit | D6093A | Power supply cage kit - Includes power supply cage, power supply module, hot swap fan tray |
| Processor | D6119-69001 | Intel Pentium II Xeon processor - 400MHz (Drake, 100MHz front side bus, 1MB Level-2 cache, Slot 2) - Includes heat sink - For LH4 and LXr 8000 (Part of D6119A) |
| Processor | D7007-69001 | Intel Pentium II Xeon processor - 400MHz (Drake, 100MHz front side bus, 512KB Level-2 cache, Slot 2) - Includes heat sink - For LH4 and LXr 8000 (Part of D7007A) |
| Processor | D7129-69001 | Intel Pentium III processor - 500MHz (Katmai, 100MHz front side bus, 512KB Level-2 cache, Slot 1) - Includes heat sink |
| Processor | D8583-69000 | Intel Pentium III processor - 550MHz (Katmai, 100MHz front side bus, 512KB Level-2 cache, Slot 1) - Includes heat sink - (Requires processor fan accessory, D8595A) |
| Processor | D9342-69001 | Intel Pentium III processor - 600MHz (Katmai, 100MHz front side bus, 512KB Level-2 cache, Slot 1) |
| Processor Upgrade | D6091A | Intel Pentium II processor upgrade - Includes one 350MHz (Deschutes, 512KB Level-2 cache, Slot 1) processor |
| Processor Upgrade | D6092A | Intel Pentium II processor upgrade - Includes one 400MHz (Deschutes, 512KB Level-2 cache, Slot 1) processor |
| Processor Upgrade | D6119A | Intel Pentium II Xeon processor upgrade - Includes one 400MHz (1MB Level-2 cache, Slot 2) processor - (For LH4 and LXr 8000) |
| Processor Upgrade | D7007A | Intel Pentium II Xeon processor upgrade - Includes one 400MHz (512KB Level-2 cache, Slot 2) processor - (For LH4 and LXr 8000) |
| Processor Upgrade | D9342A | Intel Pentium III processor upgrade - Includes one 600MHz (Katmai, 100MHz front side bus, 512KB Level-2 cache) processor |
| Product | D6098A | 128MB, 100MHz registered ECC SDRAM DIMM module |
| Product | D7031A | 18.2GB hot-swap Ultra2 Wide SCSI hard drive module - 10,000 RPM, half height |
| Product | D6099A | 256MB, 100MHz registered ECC SDRAM DIMM module |
| Product | D6097A | 64MB, 100MHz registered ECC SDRAM DIMM module |
| Product | D6077A | Hot swap internal drive capacity upgrade - Adds additional hot swap cage with six drive bays |
| Product | D7032A | Intel Pentium II processor upgrade - Includes one 450MHz (Deschutes, 512KB Level-2 cache, Slot 1) processor |
| Product | D7129A | Intel Pentium III processor upgrade - Includes one 500MHz (Katmai, 100MHz front side bus, 512KB Level-2 cache, ECC) processor |
| Product | D8583A | Intel Pentium III processor upgrade - Includes one 550MHz (Katmai, 100MHz front side bus, 512KB Level-2 cache) processor |
| Product | D4992AV | NetRAID-1 one-channel disk array controller - PCI board with one internal 68 pin high density and one external 68 pin high density Ultra wide SCSI connector |
| Product | D5013A | PCI 10Base-T/100Base-TX LAN board - LAN Adapter - PCI 10/100TX LAN Board for NetServer |
| Product | D5013BV | PCI 10Base-T/100Base-TX LAN board - LAN Adapter - PCI 10/100TX LAN Board for NetServer |
| Product | J1500B | Rack system/E41 - 1.96m 19in 41U rack cabinet - Has vented top, vented rear door, front/back anti-tip foot, castors, leveling feet |
| Product | D6095A | Redundant power supply module - May require a second power supply cage |
| Rack Mount Kit | J1492A | External mass storage rack mount kit (Quartz Gray) - Mount one or two systems side by side - Has two sliding shelves, solid base, and bezel - (D3604A/B) |
| Rack Mount Kit | J1492B | HP systems storage/6 rack kit, 11 EIA (Quartz Gray) - Mount one or two systems side by side - Has two sliding shelves, solid base, bezel, rail spacers for Rack System/E and /U - (D3604A/B) |
| Rack Mount Kit | D6094B | NetServer LH3/LH4 pedestal to rack conversion kit - Includes slide rails, bezels, and accessories |
| Rack Mount Kit | J1519A | Universal monitor rack mount kit - For any monitor up to 19-inch and 100 pounds - Quartz Gray |
| Rack Mount Kit | J1519B | Universal monitor rack mount kit (Quartz Gray) - For any monitor up to 19-inch (max height 46cm (18.1-inches)) and 100 pounds |
| Rail | 5064-6118 | HP NetServer LH3R rack mount rail - (Two used) |
| Shelf | J1520A | Stationary shelf for Rack System/E or Rack System/U |
| Software | 5011-1941 | Diagnostic assistant disk for NetServers LH,LS,LC,LF and LPr |
| Software | 5065-7470 | HP NetServer Navigator CD-ROM (Revision M.04.05) |
| Spacer | J1516A | Rail spacer kit - Includes four spacers and mounting hardware - Used with Rack System/E or Rack System/U when installing narrow legacy products |
| Storage Box | 92283L | DDS cartridge storage box - Includes security lock and file hanger adapter - Holds up to 12 cartridges |
| Storage System | D4902A | NetServer Rack Storage System/8 - Rack mounted cabinet which can hold up to eight hot-swap drive modules - Includes rack optimized storage cabinet (3U high) with eight hot pluggable bays, dual SCSI backplane, redundant hot swap power supply, and fans |
| Storage System | D3604B | NetServer Storage System/6 - External cabinet which can hold up to two half-height non-hot-swap Fast SCSI-2 drives and up to six hot-swap drive modules - Includes cabinet with 6 bays, 2 common tray shelves, dual SCSI backplane, and redundant power s |
| Storage System | D3604BR | NetServer Storage System/6 - External cabinet which can hold up to two half-height non-hot-swap Fast SCSI-2 drives and up to six hot-swap drive modules - Includes cabinet with 6 bays, 2 common tray shelves, dual SCSI backplane, and redundant power s |
| Switch | J1473A | 4-port Console Switch - Connect up to four computers to a single monitor, keyboard, and mouse - Includes rack mounting hardware - Must order connecting cables separately |
| Switch | J1493A | 4-port Console Switch (Quartz Gray) - Connect up to four computers to a single monitor, keyboard, and mouse - Includes hardware, user manual, and power cable |
| Switch | J1474A | 8-port Console Switch - Connect up to eight computers to a single monitor, keyboard, and mouse - Includes rack mounting hardware - Must order connecting cables separately |
| Switch | J1497A | 8-port Console Switch (Quartz Gray) - Connect up to eight computers to a single monitor, keyboard, and mouse - Includes hardware, user manual, and power cable |
| Tape Cartridge | 211087-001 | 12GB (24GB with 2:1 compression) DDS-3 125m tape cartridge |
| Tape Cartridge | C5708-60010 | 12GB (24GB with 2:1 compression) DDS-3 125m tape cartridge |
| Tape Cartridge | C5708A | 12GB (24GB with 2:1 compression) DDS-3 125m tape cartridge |
| Tape Cartridge | 295515-B21 | 12GB (24GB with 2:1 compression) DDS-3 125m tape cartridge - Package of 10 tapes |
| Tape Cartridge | 9164-0358 | 2GB (4GB with 2:1 compression) DDS-1 90m tape cartridge |
| Tape Cartridge | C5706A | 2GB (4GB with 2:1 compression) DDS-1 90m tape cartridge |
| Tape Cartridge | C5707A | 4GB (8GB with 2:1 compression) DDS-2 120m tape cartridge |
| Tape Cartridge | C5707-60010 | 4GB (8GB with 2:1 compression) DDS-2 120m tape cartridge - (C5707A) |
| Tape Cartridge | C5709A | Cleaning cartridge - For DDS (DAT) tape drives |
| Tape Cartridge | C5709-60010 | Cleaning cartridge - For DDS (DAT) tape drives - (C5709A) |
| Tape Cartridge | C5706-60010 | DDS-1 90m tape cartridge - 2GB native capacity (4GB with 2:1 compression) |
| Tape Cartridge | 199704-001 | DLT cleaning cartridge - Not for DLT 1 or DLT VS |
| Tape Cartridge | C5142-60010 | DLT cleaning cartridge - Not for DLT 1 or DLT VS |
| Tape Cartridge | C5142A | DLT cleaning cartridge - Not for DLT 1 or DLT VS |
| Tape Cartridge | C5141-60010 | DLT type IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
| Tape Cartridge | C5141L | DLTtape IV pre-labeled tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Includes bar code label |
| Tape Cartridge | C5141FL | DLTtape IV pre-labeled tape cartridges - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Includes bar code labels - Package of 20 pre-labeled tapes |
| Tape Cartridge | 295194-B21 | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
| Tape Cartridge | 9164-0723 | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
| Tape Cartridge | 217861-B21 | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of 21 tapes |
| Tape Cartridge | 217862-B22 | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of 315 tapes |
| Tape Cartridge | 295192-B21 | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of seven tapes |
| Tie Kit | J1512B | Tie kit for Rack System - Used to attach two E41 or U41 cabinets together |
| Tie Kit | J1513B | Tie kit for Rack System/E33 or U33 - Used to attach two E33 or U33 cabinets together |
| Tray | C2260-60078 | Drive mounting tray (Dove Gray) - For mounting a 3.5-inch hard disk drive in a 5.25-inch drive bay - Includes tray, front bezel, and status cable with LED - Hard drive mounting tray (Dove Gray) (P/O D2198A) - For mounting 3.5 inch drive in front 5.25 Inch slots of chassis - Includes tray, front panel, and status cable with LED |
| Tray | D2198A | Hard drive mounting tray kit (package of 3) - For mounting a 3.5-inch hard disk drive in a 5.25-inch drive bay - Includes tray, Dove Gray front panel, mounting screws, and status cable with LED - Hard drive mounting tray kit (Dove Gray) (3/Pkg) - 5.25inch wide tray/bezel - For mounting 3.5inch hard drive in the upper drive slot includes: tray, front panel and status cable w/ LED |
| Tray | D2198B | Hard drive mounting tray kit (package of 3) - Hard drive mounting tray kit (Dove Gray) (3/Pkg) - 5.25inch wide tray/bezel - For mounting 3.5inch hard drive in the upper drive slot includes: tray, front panel and status cable w/ LED |
| Tray | D6127A | Hot swap drive tray - For half-height Ultra2 SCSI SCA disk drive |
| Tray | D6128A | Hot swap drive tray - For low-profile Ultra2 SCSI SCA disk drive |
| Tray | 5002-3748 | Mounting tray for 5.25-inch drives |
| Tray | J1518A | Rack mounted retractable tray for keyboard and mouse - Quartz Gray |
| Tray Kit | D2199A | Drive mounting tray kit - 5.25-inch wide tray for 5.25-inch removable media drives (and hard drives in some cases) - Package of 3 trays with instructions and screws |
| Unknown Keyword | C4739-60142 | `Windows` keyboard assembly (Quartz Gray, 105 key) - Has attached 1.8M cable with 6-pin (Violet) mini DIN connector (Option ABB, European-English) |
| Unknown Keyword | C4739-60105 | `Windows` keyboard assembly (Quartz Gray, 105 key) - Has attached 1.8M cable with 6-pin (Violet) mini DIN connector (Option ABF, European-French) |
| Unknown Keyword | 8120-6357 | Power cord (Black) - 15 AWG, 2.5m (8.2ft) long - Has un-terminated (M) end for direct connection or customer installed plug for power input, and straight (F) C19 receptacle for power output (for International use) - For the computer |
| Unknown Keyword | 8120-6362 | Power cord (Black) - 2.5m (8.2ft) long - Has (M) NEMA L6-20P plug for power input, and (F) C19 receptacle for power output (for 120V in the United States, Canada, Thailand, Philippines and Japan) - For the computer |
| Unknown Keyword | 435302-111 | PS/2 'Windows' keyboard assembly (Silver and Carbonite Black) - Has attached 1.8m (6.0ft) cable with 6-pin mini-DIN connector (Switzerland) |
| Upgrade Kit | D7102A | LH3 to LH4 system upgrade - Includes two 400 MHz Pentium II Xeon processors with 1MB L2 cache, 256MB (4x64mb) DRAM, two processor terminator boards, and four voltage regulator modules |
| Upgrade Kit | D7083A | LH3 to LH4 system upgrade - Includes two 400 MHz Pentium II Xeon processors with 512K L2 cache, 256MB (4x64mb) DRAM, two processor terminator boards, and four voltage regulator modules |
| Upgrade Kit | D7015A | LH3 to LH4 system upgrade - Includes two 450 MHz Pentium II Xeon processors with 1MB L2 cache, 256MB (4x64mb) DRAM, two processor terminator boards, and four voltage regulator modules |
| Upgrade Kit | D7112A | LH3 to LH4 system upgrade - Includes two 500 MHz Pentium III Xeon processors with 1MB L2 cache, 256MB (4x64mb) DRAM, two processor terminator boards, and four voltage regulator modules |
| Voltage Regulator | 0950-2848 | Voltage regulator module (VRM, VXI/Celestica 073-20740-30) - 5VDC input, 2VDC output, 19A - For Pentium II processor - Plugs into socket on the processor board (one used for each processor module) |