| Keyword |
Part Number |
Description |
|---|
| Adapter | 660088-001 | H220 SAS host bus adapter PC board, PCIe 3.0 low profile - Has two internal x4 mini-SAS connectors, 6Gb/sec transfer rate, up to 42TB SAS or 42TB SATA capacity |
| Airflow Guide | 684891-001 | Airflow baffle - Translucent plastic baffle that mounts behind the fan cage on top of the processor heat sinks |
| Airflow Guide | 684894-001 | Power supply airflow baffle - Upright clear plastic piece that mounts to the chassis directly in front of the two power supply bays |
| Bezel | 675604-001 | Left bezel ear - With VGA port - For large form factor (LFF) |
| Cable Kit | 687954-001 | Mini-SAS cable kit - Includes a 500mm (19.7in) mini-SAS cable, 700mm (27.5in) mini-SAS cable, 850mm (33.5in) mini-SAS cable, and a two-port SATA cable |
| Cable Kit | 687955-001 | Power cable kit - Includes 8-bay SFF drive cage power cable, 8-bay LFF drive cage power cable, 12-bay LFF / 25-bay SFF drive cage power cable, fan backplane to system I/O board power cable, and graphics processing unit (GPU) power cable |
| Cage | 684886-001 | Drive cage assembly - 12-bay, large form factor (LFF) - Includes expander drive connector backplane board (two mini-SAS connectors), power cable, and two 50cm (19.7in) long mini-SAS interface cables |
| Cage | 684890-001 | Fan cage assembly - Metal structure that supports a maximum of six fans - Mounts behind the front drive cage assembly |
| Cage | 670944-001 | Front panel cage assembly, 12-bay Large Form Factor (LFF) hard drive - Includes the drive connector backplane board, cables, and left and right ears |
| Cage | 684895-001 | PCI riser cage - T-shaped metal structure, low profile single slot PCIe riser board - For use with a full height PCIe riser board |
| Drive | 628182-001 | 3TB hot-plug SATA hard disk drive - 7,200 RPM, 6Gb/sec transfer rate, 3.5-inch large form factor (LFF), Midline, SmartDrive Carrier (SC) - Not for use in MSA products |
| Drive | 765067-001 | 400GB NVMe Solid State Drive (SSD) - PCIe, Read Intensive (RI), 2.5-inch small form factor (SFF), Non-Volatile Memory express (NVMe), value endurance (VE), Smart Carrier 2 (SC2), power loss protection (PLP) |
| Drive | 738193-001 | 4TB SATA Hard disk drive (HDD) - 7,200 RPM, midline (MDL), standard connector (SC), 6Gb per second transfer rate, 3.5-inch form factor |
| Fan | 662520-001 | Hot-pluggable fan module assembly - Includes the locking latch |
| Hardware Kit | 687953-001 | Hardware blank kit - Includes an optical drive blank cover, fan blank, processor blank, and power supply blank cover |
| Hardware Kit | 662519-001 | Hardware blank kit - Includes the FlexibleLOM blank cover, PCIe riser cage blank cover, expansion slot blank cover, optical drive blank cover, and fan module blank |
| Heat Sink | 677090-001 | Screw down type heatsink assembly - Screws to studs on the system board |
| Holder | 687957-001 | Capacitor (battery) pack holder - Can hold two capacitor packs |
| Memory (DIMM) | 698889-001 | 8GB 2Rx4 PC3L-10600R dual in-line memory module (DIMM) |
| Memory (DIMM) | 743135-001 | 8GB PC3L 10600R, HMS dual in-line memory module (DIMM) |
| PC Board | 684889-001 | Fan backplane board - Hot plug - For use with DL380e and StoreEasy 1630 |
| PC Board | 684898-001 | PCIe low-profile riser board - Mounts on the primary riser cage towards the power supply |
| PC Board | 684897-001 | PCIe riser board without SAS controller - Has three PCIe connectors |
| PC Board | 659981-B21 | System Board - For use with DL360e/380eGen8 |
| PC Board | 684893-001 | System I/O board (motherboard) assembly - Includes subpan, power supply airflow baffle, and accessory kit |
| Power Cord | 491683-AA1 | Power cord (Black) - 3-wire, 1.83m (6ft) long (China) |
| Power Supply | 660184-001 | 460 watt AC Common Slot (CS) 'Platinum Plus' hot-plug power supply - Installs in computer chassis as primary or redundant supply (94% efficiency) - Requires 100-240VAC at 50/60Hz - Multiple power supplies used in the sever must be the same model number |
| Processor | 676946-001 | Intel Xeon Six-Core processor E5-2430 - 2.2GHz (Sandy Bridge-EN, 15MB Level-3 cache, 95 watt thermal design power (TDP), FCLGA 1356 socket) - Includes alcohol pad and thermal compound |
| Rail Kit | 692480-001 | Rack mounting rail kit - For 2U server models with Large Form Factor (LFF) drives - Includes left and right telescoping ball bearing type slide rails |