Keyword |
Part Number |
Description |
Adapter | 634025-001 | FlexibleLOM Ethernet 1Gb 4-port 331FLR adapter - Has four 10/100/1000BASE-T RJ45 ports and 276MB integrated buffer memory |
Adapter | 660088-001 | H220 SAS host bus adapter PC board, PCIe 3.0 low profile - Has two internal x4 mini-SAS connectors, 6Gb/sec transfer rate, up to 42TB SAS or 42TB SATA capacity |
Airflow Guide | 684891-001 | Airflow baffle - Translucent plastic baffle that mounts behind the fan cage on top of the processor heat sinks |
Airflow Guide | 684894-001 | Power supply airflow baffle - Upright clear plastic piece that mounts to the chassis directly in front of the two power supply bays |
Bezel | 675604-001 | Left bezel ear - With VGA port - For large form factor (LFF) |
Bracket | 684901-001 | Grapics Processor Unit (GPU) support brackets - For supporting a GPU board when installed in one of the PCIe riser cages - Includes one bracket for the primary and one for the secondary PCIe riser cage |
Cable Kit | 687954-001 | Mini-SAS cable kit - Includes a 500mm (19.7in) mini-SAS cable, 700mm (27.5in) mini-SAS cable, 850mm (33.5in) mini-SAS cable, and a two-port SATA cable |
Cable Kit | 687955-001 | Power cable kit - Includes 8-bay SFF drive cage power cable, 8-bay LFF drive cage power cable, 12-bay LFF / 25-bay SFF drive cage power cable, fan backplane to system I/O board power cable, and graphics processing unit (GPU) power cable |
Cable Kit | 687956-001 | Rear drive cage cable kit - Includes two sets of SATA and sideband signal cables - One set interconnects between the rear drive cage and the system input-output (I/O) board and the other to the front drive backplane board |
Cage | 684886-001 | Drive cage assembly - 12-bay, large form factor (LFF) - Includes expander drive connector backplane board (two mini-SAS connectors), power cable, and two 50cm (19.7in) long mini-SAS interface cables |
Cage | 684888-001 | Drive cage assembly - 8-bay, large Form Factor (LFF) - Includes the optical drive bay, drive connector backplane board, power cable, and one 70cm (27.5in) long mini-SAS interface cable |
Cage | 684890-001 | Fan cage assembly - Metal structure that supports a maximum of six fans - Mounts behind the front drive cage assembly |
Cage | 687958-001 | Front panel cage assembly - Includes front panel grill, and USB connector board - For 8-bay small form factor (SFF) drive model servers - Mounts on the right side of the chassis |
Cage | 687960-001 | Hard disk drive (HDD) cage assembly - 12-bay, large form factor (LFF) - Includes point-to-point backplane connector cable, power cable, 50.0cm (1.64ft) long mini-SAS cable, 70cm (27.5in) long mini-SAS cable, and a 85cm (33.5in) long mini-SAS cable |
Cage | 687961-001 | Hard disk drive (HDD) cage assembly - 25-bay, small form factor (SFF) - Includes point-to-point backplane connector cable, power cable, 50.0cm (1.64ft) long mini-SAS cable, 70cm (27.5in) long mini-SAS cable, and a 85cm (33.5in) long mini-SAS cable |
Cage | 675601-001 | Optical disk drive (ODD) module cage - Includes the front panel grill and optical drive bay - For 8-bay small form factor (SFF) drive model servers - Mounts on the left side of the chassis |
Cage | 684895-001 | PCI riser cage - T-shaped metal structure, low profile single slot PCIe riser board - For use with a full height PCIe riser board |
Cage | 688037-001 | PCI riser cage (secondary) - L-shaped metal structure - For a full height, PCIe, two slot riser board |
Cover | 675039-001 | Hard drive blank (cover) - To fill empty large form factor (LFF) drive bays |
Drive | 586009-001 | 300GB SAS hard disk drive (HDD) - 15,000 RPM, 6Gb per second transfer rate, 3.5-inch form factor, large form factor (LFF), quick release (QR), dual-port (DP), Enterprise |
Drive | 718296-001 | 480GB hot-plug Solid State Drive (SSD) - SATA interface, 6Gb/sec transfer rate, 3.5-inch large form factor (LFF), Value Endurance, Enterprise Value, SmartDrive Carrier (SC) |
Drive (Product) | 718184-B21 | HP 480GB 6Gb SATA 3.5in SmartDrive Carier (SC) Value Endurance (VE) Solid State Drive (SSD) |
Fan | 662520-001 | Hot-pluggable fan module assembly - Includes the locking latch |
Hardware Kit | 687953-001 | Hardware blank kit - Includes an optical drive blank cover, fan blank, processor blank, and power supply blank cover |
Hardware Kit | 662519-001 | Hardware blank kit - Includes the FlexibleLOM blank cover, PCIe riser cage blank cover, expansion slot blank cover, optical drive blank cover, and fan module blank |
Hardware Kit | 602506-001 | Miscellaneous hardware kit - Includes power supply blank, fan blank, optical drive blank, half and full-height PCI card blanks, PCI retainer parts, power cord retainer clip, and Torx T-10/T-15 L-wrench |
Heat Sink | 677090-001 | Screw down type heatsink assembly - Screws to studs on the system board |
Holder | 687957-001 | Capacitor (battery) pack holder - Can hold two capacitor packs |
Memory (DIMM) | 743135-001 | 8GB PC3L 10600R, HMS dual in-line memory module (DIMM) |
Memory (Product) | 696679-B21 | HP 8GB 2Rx4 PC3L-10600R-9 Hms Memory Kit |
Panel | 687952-001 | Access panel (top cover) - For use with 12-bay large form factor (LFF), and 25-bay small form factor (SFF) drive server models |
Panel | 687951-001 | Access panel (top cover) - For use with 8-bay large form factor (LFF), 8-bay small form factor (SFF), and 16-bay SFF drive server models |
PC Board | 684889-001 | Fan backplane board - Hot plug - For use with DL380e and StoreEasy 1630 |
PC Board | 684898-001 | PCIe low-profile riser board - Mounts on the primary riser cage towards the power supply |
PC Board | 687962-001 | PCIe riser board - Has 2 PCIe connectors, central processing unit (CPU) 2 |
PC Board | 684896-001 | PCIe riser board with SAS controller - Has two PCIe connectors |
PC Board | 684897-001 | PCIe riser board without SAS controller - Has three PCIe connectors |
PC Board | 659981-B21 | System Board - For use with DL360e/380eGen8 |
PC Board | 684893-001 | System I/O board (motherboard) assembly - Includes subpan, power supply airflow baffle, and accessory kit |
Power Cord | 142258-001 | AC power distribution unit (PDU) power cord (Black) - 250VAC, 16AWG, 2.0m (6.6ft) long - Includes IEC-320 C14 (M) connector to IEC 320 C13 (F) connector |
Power Cord | 416151-B21 | PDU power cord |
Power Supply | 536404-001 | 460W AC Common Slot (CS) 'Gold' hot-plug power supply - Installs in the computer chassis as primary or redundant supply (92% efficiency) - Requires 100-240VAC at 50/60Hz - Multiple power supplies used in the sever must be the same model number |
Power Supply | 503297-B21 | HP 460W 12V Hot-plug ACC Power Supply |
Processor | 676946-001 | Intel Xeon Six-Core processor E5-2430 - 2.2GHz (Sandy Bridge-EN, 15MB Level-3 cache, 95 watt thermal design power (TDP), FCLGA 1356 socket) - Includes alcohol pad and thermal compound |
Product | 663268-B21 | HP 2U Gen8 12-Large Form Factor (LFF) w/e Hard Disk Drive (HDD) Cage |
Product | 667202-B21 | HP DL380e Gen8 SMC-B Server |
Product | 683465-B21 | HP DL380eGen8 CPU Heatsink |
Product | 665551-B21 | HP Fan Assembly DL38X Gen8 |
Product | 661405-B21 | HP PCI-E DL380eGen8 FH non-LSI Riser |
Product | 416151-AA1 | HP Power Cord 1.8m (6ft) long C13 |
Product | 650934-B21 | HP Z H220 Host Bus Adapter |
Rack Mount Kit | 725269-001 | Quick-release type rack ear kit - Includes the left and right quick-release rack ears with mounting screws - Mounts to the left and right side of the server chassis |
Tool | 413965-001 | Torx tool - L-shaped wrench with T-15 and T-10 ends |