Keyword |
Part Number |
Description |
Adapter | 669281-001 | Ethernet 560FLR adapter - 10GB, 2-port |
Airflow Guide | 632801-001 | Plastic air blocker - For DIMM modules |
Cable | 733989-001 | Cable assembly - Redundant power system (RPS), 1U form factor, left, 24-pin |
Cable | 733176-001 | Cable assembly - Redundant power system (RPS), 1U form factor, right, 24-pin |
Cable | 622068-001 | Cable for remote console management enablement connectivity |
Cable | 669746-001 | Cable for SAS hard drive disk backplane |
Cable | 707776-001 | Graphics Processing Unit (GPU) power cable - For use with SL250 |
Cable | 708915-001 | Graphics Processing Unit (GPU) power cable assembly - 25cm (9.84in) long |
Cable | 695003-001 | Internal USB cable - 33.4in (850mm) long |
Cable | 669749-001 | Left Peripheral Component Interconnect (PCI) power cable |
Cable | 669747-001 | Left power cable for hard drive backplane |
Cable | 708916-001 | Power capping cable - Graphics Processing Unit (GPU), 39cm (15.35in) long |
Cable | 671912-001 | Rear Graphics Processing Unit (GPU) power cable - For 2U form factor, right node use, x32 |
Cable | 669751-001 | Right Peripheral Component Interconnect (PCI) power cable |
Cable | 669748-001 | Right power cable for hard drive backplane |
Cable | 669284-001 | System board power cable |
Cable Kit | 600670-001 | Cable kit - Includes power, LED, Remote Configuration Module (RCM) cables |
Cable Kit | 576896-001 | Cable kit - Unit Identification (UID) LED, 2U form factor, G6 to RJ45 |
Cable Kit | 572605-001 | Cable kit - USB, internal, 850mm (33in) long |
Capacitor | 660092-001 | Capacitor Pack with 610mm (24 inches) long cable - Provides back up power to the Flash-Backed Write Cache (FBWC) memory module for up to 80 seconds in the event of a system power failure - For use with Smart Array Controllers |
Cover | 667276-001 | Hard drive blank (cover) - To fill empty Small Form Factor (SFF) drive bays |
Drive | 656108-001 | 1TB hot-plug SATA hard disk drive - 7,200 RPM, 6Gb/sec transfer rate, 2.5-inch small form factor (SFF), Midline, SmartDrive Carrier (SC) - Not for use in MSA products |
Drive (Product) | 655710-B21 | HP 1TB 6G SATA 7.2k 2.5in Single Controller (SC) Midline (MDL) Hard Drive Disk (HDD) |
Fan | 600659-001 | System fan non-redundant - 80mm (3.14in) |
Handle | 768486-001 | Chassis lift handle kit |
Hardware | 668890-001 | Front cage for graphics processing unit (GPU) |
Hardware | 669744-001 | Hard drive disk cage |
Hardware Kit | 669741-001 | Miscelaneous plastics and cable kit |
Heat Sink | 709990-001 | SL200 series virtual connect (VC) processor heatsink - Includes alcohol pad and heatsink installation card |
Heat Sink | 738022-001 | SL200 series virtual connect (VC) processor heatsink - Includes alcohol pad and heatsink installation card |
Holder | 669291-001 | Flash-based write cache (FBWC) capacitor pack holder |
Memory (DIMM) | 715273-001 | 8GB, 1866MHz, PC3-14900R-13, DDR3, dual-rank x4, 1.50V, registered dual in-line memory module (RDIMM) - Supported use with E5-2600 v2 series processors |
Memory (Product) | 708640-B21 | HP Z8GB 2Rx4 PC3-14900R-13 Memory Kit |
Memory Module | 678326-001 | Controller cache module - 512MB, 184-pin, DDR3 mini-DIMM 512X40 IN |
PC Board | 671914-001 | Backplane board for hard drive disk |
PC Board | 739872-001 | GPU interposer 2U PE3 board |
PC Board | 669752-001 | Left board for L2/Graphics Processing Unit (GPU) power with bracket |
PC Board | 739871-001 | PE3 2U 24x riser Ivy Bridge
|
PC Board | 739873-001 | Personality board left |
PC Board | 671916-001 | Rear riser for Graphics Processing Unit (GPU) board |
PC Board | 669753-001 | Right board for L2/Graphics Processing Unit (GPU) power with bracket |
PC Board | 739874-001 | Right personality board |
PC Board | 671624-001 | Riser board - Advanced Lights Out Manager (ALOM) |
PC Board | 663289-001 | S6500 backplane - Power, data, high-efficiency |
PC Board | 701491-001 | Second PE3 (x32) Graphics Processing Unit (GPU) board - 2U form factor |
PC Board | 801946-001 | System motherboard - SL230 Gen8, IVB Enhanced VR |
PC Board (Graphics) | 739326-001 | NVIDIA K10 REV B dual Graphics Accelerator board - 8GB GDDR5 total memory (4GB per GPU), 3072 CUDA (Compute Unified Device Architecture) cores |
Power Cord | 142258-001 | AC power distribution unit (PDU) power cord (Black) - 250VAC, 16AWG, 2.0m (6.6ft) long - Includes IEC-320 C14 (M) connector to IEC 320 C13 (F) connector |
Power Cord | 142258-002 | AC power distribution unit (PDU) power cord (Black) - 250VAC, 16AWG, 2.5m (8.2ft) long - Includes IEC-320 C14 (M) connector to IEC 320 C13 (F) connector |
Power Cord | 538266-001 | Power cord (black) - 1.82m (6ft) long, 12A (Japan) |
Power Cord | 292657-AA1 | Power cord (Black) - 18 AWG, 3.6m (12.0ft) long - Includes straight C13 (F) receptacle (Peoples Republic of China) |
Power Cord | 491683-AA1 | Power cord (Black) - 3-wire, 1.83m (6ft) long (China) |
Power Supply | 660185-001 | 1200 watt AC Common Slot (CS) 'Platinum Plus' hot-plug power supply - Installs in computer chassis as primary or redundant supply (94% efficiency) - Requires 100-240VAC at 50/60Hz - Multiple power supplies used in the sever must be the same model number |
Power Supply Kit | 656364-B21 | HP 1200 Watts common slot platinum plus hot plug power supply kit |
Processor | 730237-001 | Intel Xeon E5-2660 v2 Ten-Core 64-bit processor - 2.20GHz (Ivy Bridge-EP, 25MB Level-3 cache, Intel QuickPath interconnect (QPI) speed 8.0 GT/s, 95 watt thermal design power (TDP), socket FCLGA 2011) |
Processor Upgrade | 721258-B21 | HP Heatsink VC SL2x0s Gen8 CPU 2 Processor Kit |
Processor Upgrade | 725939-L21 | HP SL2x0s Gen8 E5-2660v2 Factory Installed Option (FIO) Processor Kit |
Processor Upgrade | 725939-B21 | HP SL2x0s Gen8 E5-2660v2 Processor Kit |
Processor Upgrade | 725965-B21 | HP SL2x0s Gen8 ZE5-2660v2 Processor Kit |
Product | 684218-B21 | HP 10GbE 2P 560FLR-Enhanced Small-form Pluggable (SFP+) Adapter Factory Installed Option (FIO) Kit |
Product | 676473-B21 | HP 512MB Flash-Based Write Cache (FBWC) B-Series Smart Array |
Product | 708639-B21 | HP 8GB 2Rx4 PC3-14900R-13 Kit |
Product | 455883-B21 | HP BLc 10Gb Short Range (SR) Enhanced Small-form Pluggable (SFP+) Option |
Product | 599109-B21 | HP s6500 4U Rail Kit |
Product | 608477-B21 | HP s6500 Chassis Handles Kit |
Product | 617858-B21 | HP s6500 Non-Redundant Fan Kit |
Product | 614167-B21 | HP s6500 W/O Fans 4U Chassis |
Product | 750349-B21 | HP SL250s Gen8 Ivb Lft Tray Node Server |
Product | 750350-B21 | HP SL250s Gen8 Ivb Rht Tray Node Server |
Product | 752161-B21 | HP SL250sGen8 IVB Enhanced Node, Rev:A |
Product | 728707-B21 | HP SL250sGen8 IVB Node, Rev:E |
Product | 734483-B21 | HP Tray SL250s Gen8 2U IVB Left |
Product | 734489-B21 | HP Tray SL250s Gen8 2U IVB Right |
Product | E5V47A | NVIDIA Tesla K10 Rev B Dual GPU Module |
Rack Mount Kit | 600663-001 | Rack managment arm assembly - 4U narrows down to 2U |
Switch | 410530-001 | Server switch 2X1X16, IP console, USB/Virtual Media (VM) |
Transceiver | 456096-001 | Transceiver - BladeSystem, c-Class, 10Gb, short range (SR), enhanced small-form pluggable (SFP+) |