| Keyword |
Part Number |
Description |
|---|
| Adapter | 616012-001 | Ethernet 1Gb 332T adapter - 2-port, 4Gb/s full duplex aggregate, with Broadcom NetXtreme BCM5720 chipset |
| Adapter | 768080-001 | FlexFabric 10Gb 2-port 536 FlexibleLOM |
| Adapter | 749997-001 | H240ar smart host bus adapter (HBA) board - PCIe3 x8 SAS adapter - Has two internal x4 mini-SAS ports - For up to 12Gb/sec transfer rate SAS and 6Gb/sec transfer rate SATA (does NOT support cache modules) |
| Adapter | 764736-001 | InfiniBand Fourteen Data Rate (FDR)/Ethernet 10Gb/40Gb 2-port 544+ Quad Small Form-factor Pluggable (QSFP) adapter
|
| Airflow Guide | 777302-001 | Airflow baffle - Plastic baffle that mounts behind the fan cage on top of the processor heat sinks |
| Arm | 744116-001 | Cable management arm kit - Guides the power and interface cables to prevent binding when the server is slid in and out of the rack - Mounts to the rear of the rack |
| Bracket | 784960-001 | Mezzanine card bracket/assembly |
| Cable | 784961-001 | Cable assembly SATA Gen9 |
| Cable | 416003-001 | HP c-Class blade SUV cable - Performs server blade administration, configuration and diagnostic procedures |
| Cable | 784621-001 | Mini-SAS cable assembly kit (Includes two mini-SAS cables) - For connecting the 8-bay small form factor (SFF) hard drive cage to the drive controller board |
| Cable | 784622-001 | Power cable kit (Includes two cables) - For connecting the small form factor 8-bay (or three 8-bay) hard drive cages, or large form factor 4-bay, or 12-bay hard drive cages to the system I/O board |
| Cage | 780971-001 | 8-bay hot-plug small form factor (SFF) hard drive cage assembly - Includes the metal cage structure and the backplane board - Mounts in the front of the server |
| Cage | 777294-001 | Fan cage assembly - Holds six fan modules - Mounts in the bottom of the chassis between the hard drives and the system I/O board |
| Cage | 777281-001 | PCI riser cage assembly - Includes the metal cage assembly with the 3-slot standard primary PCI riser board - Includes one full-length PCIe3 x16 slot, one half-length PCIe3 x16 slot, and one half-length PCIe3 x8 slot |
| Controller | 750054-001 | HP PCIe H241 host bus adapter
|
| Cover | 775423-001 | DL360 Gen9 blank cover kit - Contains power supply blank cover, Flexible LOM blank cover, fan slot blank, and heatsink blank |
| Cover | 777301-001 | DL380 blank cover kit - Contains one power supply blank cover, two 8-bay small form factor (SFF) hard drive cage blank covers, one secondary PCI blank cover, two fan slot blanks, and one Smart Array Controller blank |
| Cover | 670033-001 | Hard drive blank (cover) - To fill empty small form factor (SFF) drive bays |
| Cover | 777681-001 | Top cover - For use with BL460c Gen9 |
| Drive | 805391-001 | 1.2TB hot-plug Solid State Drive (SSD) - SATA interface, Write Intensive-2 (WI), 6Gb/sec transfer rate, 2.5-inch small form factor (SFF), Smart Carrier (SC), Power Loss Protection (PLP) |
| Drive | 785407-001 | 300GB SAS hard drive - 15,000 RPM, 2.5-inch small form factor (SFF), 12Gb/s, enterprise |
| Drive | 653957-001 | 600GB hot-plug dual-port SAS hard disk drive - 10,000 RPM, 6Gb/sec transfer rate, 2.5-inch small form factor (SFF), Enterprise, SmartDrive Carrier (SC) - Not for use in MSA products |
| Enclosure | 695142-001 | Blade 3000c enclosure tape - No drive |
| Fan | 777286-001 | High performance fan module - For use on servers configured with 12 large form factor drives, 24 small form factor drives, certain graphics cards, and/or ASHRAE operating environments (six used) |
| Fan | 777285-001 | Standard fan assembly module - Mounts in the fan cage between the front hard drive bays and the system I/O board (six used) |
| Fan | 413996-001 | System active cool 200 fan module |
| Filler | 414051-001 | Device bay plastic blank |
| Filler | 414053-001 | Interconnect blank |
| Filler | 414054-001 | Onboard administrator module blank |
| Filler | 416043-001 | Power supply blank |
| Hardware | 819197-001 | DL38x NEBS baffle system |
| Hardware | 414052-001 | Fan blank |
| Hardware | 777683-001 | Hard drive blank - For use with BL460c Gen9 |
| Hardware | 777684-001 | Left DIMM baffle - For use with the BL460c Gen9 |
| Hardware | 858670-001 | MSA 1040 ear kit |
| Hardware | 858669-001 | MSA 2040 ear kit |
| Hardware | 777295-001 | Rack ear kit (standard) - Includes the left and right rack mount ears for servers with front small form factor (SFF) hard drive bays |
| Hardware | 777685-001 | Right DIMM baffle - For use with BL460c Gen9 |
| Hardware | 783227-001 | Right rack ear (standard) - Includes the right rack mount ear with the HP logo and the ProLiant DL388 Gen9 nameplate - For servers with front small form factor (SFF) hard drive bays |
| Hardware Kit | 432463-001 | Hardware kit - Contains device bay shelf, vertical cable cover, and left LCD cap |
| Hardware Kit | 709863-001 | Plastics kit - Left front bezel |
| Hardware Kit | 709864-001 | Plastics kit - Right front bezel |
| Heat Sink | 777687-001 | Heatsink CPU 1 - For use with Gen9 series |
| Heat Sink | 777686-001 | Heatsink CPU two - For use with BL460cG9 |
| Heat Sink | 777290-001 | Standard efficiency heatsink assembly - For use with processors less than or equal to 105W |
| Memory (DIMM) | 774172-001 | 16GB, 2133MHz, PC4-2133P-R, DDR4, dual-rank x4, 1.20V, CAS-15-15-15, registered dual in-line memory module (RDIMM) |
| Memory (DIMM) | 774169-001 | 4GB memory DIMM 1Rx8, 2133R-15 |
| Memory (DIMM) | 774170-001 | 8GB, 2133MHz, PC4-2133P-R, DDR4, single-rank x4, 1.20V, CAS-15-15-15, registered dual in-line memory module (RDIMM) |
| Module | 544682-001 | DC input power - Termal |
| Module | 708046-001 | HP c7000 Onboard Administrator with KVM |
| Module | 415839-001 | Insight management LCD display module |
| Module | 777289-001 | Standard cabled power switch module assembly (no internal system insight display) - Includes the power switch, UID switch, and status LEDs - For use with servers configured with large form factor (LFF) drive bays |
| PC Board | 689229-001 | AMP midplane assembly (fan power board) - Includes rear cage, for enclosure SKUs that start with 6xxxxx-xxx or 7xxxxx-xxx |
| PC Board | 838992-001 | BL460c motherboard with base pan |
| PC Board | 709865-001 | Discovery services board |
| PC Board | 709866-001 | Kamikaze 2 board - New connectors |
| PC Board | 414050-001 | Middle backplane assembly board - For all HP C7000 enclosures that start with a SKU or Part number of 4xxxxx-xxx |
| PC Board | 820254-001 | PCA motherboard - For use with BL460c Gen9 V2 |
| PC Board | 777279-001 | SAS/SATA backplane board - 8-bay small form factor (SFF) hard drive cage, up to 12Gbs transfer speed |
| PC Board | 744412-001 | SAS/SATA Hard drive backplane - For use with BL460c Gen9 |
| PC Board | 843307-001 | System I/O board (motherboard) assembly - For Intel Xeon E5-2600 series v3 (Haswell) and v4 (Broadwell) processors - Includes the system I/O board, alcohol pad, thermal grease, and installation instruction card |
| Power Cord | 142258-003 | AC Power Distribution Unit (PDU) power cord (Black) - 250V, 16AWG, 3m (9.8ft) long - Has C14 (M) connector to C13 (F) connector |
| Power Cord | 142258-001 | AC power distribution unit (PDU) power cord (Black) - 250VAC, 16AWG, 2.0m (6.6ft) long - Includes IEC-320 C14 (M) connector to IEC 320 C13 (F) connector |
| Power Cord | 538266-001 | Power cord (black) - 1.82m (6ft) long, 12A (Japan) |
| Power Cord | 491683-AA1 | Power cord (Black) - 3-wire, 1.83m (6ft) long (China) |
| Power Supply | 754382-001 | 800W 1U flexible slot, 48VDC power supply , hot-plug |
| Power Supply | 801101-001 | Power supply -12 VDC output, -48VDC input power supply capable of supplying 2650W maximum output power |
| Processor | 762443-001 | Intel Xeon E5-2609 v3 Six-Core 64-bit processor - 1.90GHz base frequency (Haswell-EP, 15MB Intel Smart Cache, Intel QuickPath Interconnect (QPI) speed 6.4 GT/s, 85W Thermal Design Power (TDP), FCLGA 2011-3 socket) |
| Processor | 835601-001 | Intel Xeon E5-2620 v4 Eight-Core 64-bit processor - 2.1GHz base frequency (Broadwell, 20MB Intel Smart Cache, Intel QuickPath Interconnect (QPI) speed 8.0 GT/s, 85W Thermal Design Power (TDP), FCLGA 2011-3 socket) |
| Product | 785099-B21 | HP 300GB 12G SAS 15K 2.5in ENT HDD |
| Product | BV921C | HPE MSA DC Power CG SFF Drive Enclosure |
| Product | 785100-B21 | Product Description Not Available |
| Product | 853549-001 | Product Description Not Available |
| Product | 853559-001 | Product Description Not Available |
| Product | 853560-001 | Product Description Not Available |
| Product | 854389-001 | Product Description Not Available |
| Rack Mount Kit | 432461-001 | Rackmount kit - Includes right and left shelf rails, and M5 square hole cage and clip nuts |
| Sleeve | 711994-001 | R2.04 administration onboard sleeve |
| Switch | 663656-001 | Blade switch module assembly - RJ45, Small Form Pluggable (SFP), hardware-based wire-speed access control lists (ACLs), secure management via SSHv2 and SNMPv3 |
| Unknown Keyword | 764735-001 | SPS IB FDR/EN 40Gb 2P 544+M Adptr |