Keyword |
Part Number |
Description |
Adapter | 789897-001 | FlexibleLOM Ethernet adapter - Four 10/100/1000 Mbps full duplex ports |
Airflow Guide | 662527-001 | Airflow baffle - Translucent plastic baffle that mounts behind the fan cage on top of the processor heat sinks |
Arm | 675606-001 | Cable management arm kit - Guides the power and interface cables to prevent binding when the server is slid in and out of the rack - Mounts to the rear of the rack |
Bezel | 702254-001 | Non-brand bezel - 2U form factor |
Cable | 675613-001 | Power cable - For 8-bay or 16-bay small form factor (SFF) server models - Connects between the hard drive backplane board and the system input-output (I/O) board |
Cable Kit | 725768-001 | Cable kit - Includes 25-bay SFF mini-SAS SR cable, 12-bay LFF mini-SAS SR cable, and 12-bay LFF or 25-bay SFF power cable |
Cage | 691265-001 | Drive cage assembly - 25-bay, Small Form Factor (SFF) - Includes right ear (with power button, USB port, and quick release), left ear (with video port and quick release), the two associated cable assemblies, and the backplane drive connector board |
Cage | 662518-001 | Fan cage assembly (includes the fan backplane board) - Holds six fan modules - Mounts in the bottom of the chassis between the hard drives and the system I/O board |
Cage | 696958-001 | Front panel cage assembly, 25-bay Small Form Factor (SFF) hard drive - Includes the drive connector backplane board, cables, and left and right ears |
Cage | 662526-001 | PCI riser cage - L-shaped metal structure that mounts towards the rear of the server - Capable of mounting two or three PCIe cards depending on which riser board is used (Does not include the riser board) |
Cage | 662537-001 | Processor cage assembly - Includes hardware components for the heatsink retaining bracket - Screws to system input-output (I/O)board |
Capacitor | 660093-001 | Capacitor pack with 914mm (36 inches) long cable - Provides back up power to the flash-based write cache (FBWC) memory module for up to 80 seconds in the event of a system power failure - For use with Smart Array controllers |
Drive | 719429-001 | 900GB SAS hard drive - 10,000 RPM, 6Gb/sec transfer rate, 2.5-inch small form factor (SFF), Enterprise, SmartDrive Carrier (SC) |
Fan | 662520-001 | Hot-pluggable fan module assembly - Includes the locking latch |
Hardware | 702255-001 | Badges - Position identificator, indicates top position, black color |
Hardware Kit | 662519-001 | Hardware blank kit - Includes the FlexibleLOM blank cover, PCIe riser cage blank cover, expansion slot blank cover, optical drive blank cover, and fan module blank |
Hardware Kit | 662523-001 | Miscellaneous hardware kit - Includes fan brackets (left and right), DVD cable routing guide, DIMM side cable guide, and DVD cable retainer |
Hardware Kit | 700383-001 | Miscellaneous hardware kit - Includes processor blank air deflector assembly, left fan bracket (for 12-bay LFF and 25-bay SFF models only), and PCIe riser cage divider |
Heat Sink | 662522-001 | Latch type heatsink assembly (standard efficiency) - Latches to the top of the processor with the heatsink retaining bracket (processor cage assembly) |
Holder | 687957-001 | Capacitor (battery) pack holder - Can hold two capacitor packs |
Memory (DIMM) | 664692-001 | 16GB, 1333MHz, PC3L-10600R-9, DDR3, dual-rank x4, 1.35V, registered dual in-line memory module (RDIMM) |
Memory (Product) | 647902-B21 | HP 16GB 2Rx4 PC3L-10600R-9 Memory Kit |
Memory Module | 633543-001 | 2GB flash backed write cache (FBWC) memory module, 72-bit wide - Does not include the controller board or capacitor module - For use with the P420, P421, P430, P431, and 822 Smart Array controllers |
Panel | 662534-001 | Access panel - Top cover for the 8-bay small form factor (SFF), and 8-bay large form factor (LFF) model servers |
PC Board | 662524-001 | 3-slot PCIe riser board (standard) - Includes one x16 slot, and two x8 slots |
PC Board | 662528-001 | Power supply backplane board assembly |
PC Board | 801939-001 | System I/O board (motherboard) assembly - Includes sub pan (tray) |
Power Cord | 142258-001 | AC power distribution unit (PDU) power cord (Black) - 250VAC, 16AWG, 2.0m (6.6ft) long - Includes IEC-320 C14 (M) connector to IEC 320 C13 (F) connector |
Power Cord | 416151-B21 | PDU power cord |
Power Cord | 491683-AA1 | Power cord (Black) - 3-wire, 1.83m (6ft) long (China) |
Power Supply | 660183-001 | 750 watt AC Common Slot (CS) 'Platinum Plus' hot-plug power supply - Installs in computer chassis as primary or redundant supply (94% efficiency) - Requires 100-240VAC at 50/60Hz - Multiple power supplies used in the sever must be the same model number |
Processor | 670529-001 | Intel Xeon E5-2620 Six-Core 64-bit processor - 2.00GHz (Sandy Bridge-EP, 15MB Level-3 cache, Intel QuickPath interconnect (QPI) speed 7.2 GT/s, 95 watt thermal design power (TDP), FCLGA 2011-pin socket) |
Product | 663488-B21 | HP 2U Cable Management Arm Gen8 |
Product | 656809-B21 | HP 36-inch Capping Module |
Product | 657331-B21 | HP 750W Power Supply |
Product | 719425-B21 | HP 900GB 6G SAS 10k 2.5 DP SC HTC HDD |
Product | 676404-B21 | HP Cable Clip Retainer DL380p/385p Gen8 |
Product | 725131-B21 | HP DL380p Gen8 EXTRD AL Standard Heatsink Module |
Product | 731941-B21 | HP DL380p Gen8 InfiniBand (IB) Mod-F0-2 Server |
Product | 667128-B21 | HP DL380p Gen8 MOD-F0-2 Server |
Product | 684208-B21 | HP Ethernet 1GbE 4P 331FLR Factory Installed Option (FIO) Adapter |
Product | 696039-B21 | HP Left Air Fan Bracket 12/25 380p |
Product | 686567-B21 | HP Media Cage 25-Small Form Factor (SFF) DL38XGen8 |
Product | 416151-AA1 | HP Power Cord 1.8m (6ft) long C13 |
Product | 688828-B21 | HP Processor Blank Air Deflector DL380p Gen8 |
Product | 631682-B21 | HP Z 2GB FBWC for P-Series Smart Array |
Product | 693223-B21 | OEM 2U Non-Brand Bezel Gen 8 Kit |
Product | 662249-B21 | Product Description Not Available |
Product | 663479-B21 | Product Description Not Available |
Product | 666880-B21 | Product Description Not Available |
Product | 743524-B21 | Product Description Not Available |
Rail Kit | 662535-001 | Rack mounting rail kit - For 2U server models with Small Form Factor (SFF) drives - Includes left and right telescoping ball bearing type slide rails |