Keyword |
Part Number |
Description |
Adapter | 738191-001 | H221 Gen3 host bus adapter - PCIe 3.0, 6Gb/s bandwidth per physical link, eight SAS ports |
Airflow Guide | 667256-001 | Airflow baffle assembly - Large translucent plastic baffle structure that mounts behind the fan cage and on top of the processor heat sinks |
Airflow Guide | 667280-001 | PCI fan baffle set - Translucent plastic pieces that install over the PCI card slots in redundant fan configuration servers - Includes left and right baffles |
Airflow Guide | 667257-001 | Power supply airflow baffle assembly - Assures proper airflow to the power supplies - Mounts just behind the front drive cages |
Bezel | 581330-001 | Bezel kit - Includes power bezel assembly (Carbon color), power switch plunger, unit identity (UID) button, and lightpipe power UID LED button |
Bezel | 667273-001 | Rack bezel - Front frame that surrounds the drive cages and front I/O assembly |
Bracket | 667263-001 | Support bracket with card guides - Supports the rear of the PCIe cards when installed on the system I/O board - Includes left and right support brackets |
Cable | 681648-001 | Discovery cable |
Cable | 667259-001 | Drive power cable - Connects between the hard drive backplane board, optical (or other media) drive, and the system I/O board |
Cable | 408765-001 | External mini-SAS cable - 0.5m (1.64ft) - For connecting the Smart Array P800 Controller with the HP StorageWorks Modular Smart Array 60 |
Cable | 465661-001 | SATA cable - 1U, 61.0cm (24.0in) long |
Cable | 667265-001 | SATA cable - 90-degree connector to 90-degree connector, 305mm (12 inches) long - Connects between the optical (or other media) drive and the system I/O board |
Cable | 465660-001 | SATA DVD drive power converter cable - 4-pin power connector (red, yellow, and black wires) to two SATA type power connectors |
Cable | 717429-001 | SPS-CA EXT HYB MSAS HD TO MSAS 4L 2m |
Cable Kit | 667266-001 | Miscellaneous cable kit - Includes Mini-SAS to Mini-SAS cable 324mm (12.75 inches) long, hard drive backplane power cable, and graphics card power cable (2x4) |
Cage | 667255-001 | Fan cage assembly - Holds the four fan modules - Mounts in the bottom of the chassis between the hard drives and the system I/O board |
Card | 738575-001 | HP 8GB SD enterprise mainstream flash media kit |
Chassis | 530929-001 | Chassis - For use with storage products |
Control Panel | 519319-001 | Rear control panel - Includes unit identity (UID) power board, and 40cm (15.7in) longribbon cable |
Cover | 667270-001 | 2-bay power supply blank cover - Covers the unused 2-bay power supply slots in a 2-bay power supply server configuration |
Cover | 392613-001 | Hard drive blank (cover) - To fill empty 2.5-inch small form factor (SFF) drive bay slots |
Cover | 667276-001 | Hard drive blank (cover) - To fill empty Small Form Factor (SFF) drive bays |
Cover | 667261-001 | Hard drive cage cover - Covers one of the drive cages (8-bay SFF / 6-bay LFF) when no drives are installed |
Cover | 698883-001 | Power supply blank (cover) - To fill empty common slot power supply bays |
Display | 667271-001 | Systems Insight Display (SID) assembly - Mounts in the upper right corner for tower configurations (upper left corner for rack configurations) - Includes cable |
Drive | 730704-001 | 1.2TB hard drive SAS - 10,000 RPM, 2.5-inch small form factor (SFF), 6Gb/s transfer rate, MSA (modular storage array) |
Drive | 730709-001 | 300GB SAS, MSA drive - 10,000 RPM, 2.5-inch small form factor (SFF), 6 Gb/s transfer rate |
Drive | 624592-001 | DVD-RW optical disk drive (Jack Black color) - SATA interface, half-height |
Fan | 519325-001 | Fan assembly - For HP StorageWorks D2600 and D2700 Disk Enclosures |
Fan | 667254-001 | Fan module assembly - 92mm x 92mm (3.62 inches x 3.62 inches) - Includes latch - Three used with single processor, four used with redundant fan configuration or dual processors |
Fan/Airflow Guide | 667258-001 | Fan louver assembly - One is inserted in each fan bay when configuring a hot-plug redundant fan system |
Filler | 667262-001 | Fan cage blank (filler) - Occupies slot one in the fan cage when the second processor is not installed |
Heat Sink | 667268-001 | Latch type heatsink assembly - Latches to the top of the processor with the heatsink retaining latch on the system I/O board |
Media (Optical) | 624192-B21 | Half-Height SATA DVD-RW Black Bezel Optical Drive Kit |
Memory (DIMM) | 715273-001 | 8GB, 1866MHz, PC3-14900R-13, DDR3, dual-rank x4, 1.50V, registered dual in-line memory module (RDIMM) - Supported use with E5-2600 v2 series processors |
Module | 667260-001 | Front I/O module assembly - Includes the four front USB connectors, power switch, status LEDs, and associated cables - Mounts on the front between the drive cages |
Module | 519324-001 | Voltage regulator module - Includes blank thermal print label |
PC Board | 667269-001 | 2-bay power supply backplane board - Mounts on top of the 2-bay power supply cage (under the system I/O board) |
PC Board | 667275-001 | 8-bay small form factor (SFF) hot-plug hard drive backplane board |
PC Board | 519321-001 | Backplane board - Includes 25 slots for SAS drives - For HP StorageWorks D2700 Disk Enclosure |
PC Board | 519320-001 | Disk enclosure - Input-output (I/O) module, SAS interface, small form factor (SFF) |
PC Board | 519323-001 | Fan interconnection board - Includes thermal print label, and 26AWG 1.7cm (0.66in) long cable assembly |
PC Board | 70-41214-T1 | Fibre Channel I/O |
PC Board | 519322-001 | Front power unit identity (UID) interconnect board |
PC Board | 801941-001 | System I/O board (motherboard) Sandy Bridge enhanced - Includes tray
|
Power Cord | 142258-001 | AC power distribution unit (PDU) power cord (Black) - 250VAC, 16AWG, 2.0m (6.6ft) long - Includes IEC-320 C14 (M) connector to IEC 320 C13 (F) connector |
Power Cord | AF556A | HP 1.83m (6ft) long 10A C13 US Power Cord |
Power Cord | 538266-001 | Power cord (black) - 1.82m (6ft) long, 12A (Japan) |
Power Cord | 491683-AA1 | Power cord (Black) - 3-wire, 1.83m (6ft) long (China) |
Power Cord | 142766-005 | Power cord (Black) - Has 3-wire plug, 18 AWG, 1.8m (6.2ft) long - Has straight C13 (F) receptacle - For US and Canada |
Power Supply | 660184-001 | 460 watt AC Common Slot (CS) 'Platinum Plus' hot-plug power supply - Installs in computer chassis as primary or redundant supply (94% efficiency) - Requires 100-240VAC at 50/60Hz - Multiple power supplies used in the sever must be the same model number |
Power Supply | 536404-001 | 460W AC Common Slot (CS) 'Gold' hot-plug power supply - Installs in the computer chassis as primary or redundant supply (92% efficiency) - Requires 100-240VAC at 50/60Hz - Multiple power supplies used in the sever must be the same model number |
Power Supply Kit | 656362-B21 | HP 460W Common Slot Platinum Plus Hot Plug Power Supply Kit |
Processor | 730238-001 | Intel Xeon E5-2650 v2 Eight-Core 64-bit processor - 2.60GHz (Ivy Bridge-EP, 20MB Level-3 cache, Intel QuickPath interconnect (QPI) speed 8.0 GT/s, 95W thermal design power (TDP), socket FCLGA 2011) |
Product | E7W47A | HP 1.2TB 6GB SAS 10K SFF DP ENT HDD |
Product | 708639-B21 | HP 8GB 2Rx4 PC3-14900R-13 Kit |
Product | 726113-B21 | HP 8GB SD EM Flash Media Kit |
Product | 716191-B21 | HP Ext 2.0m MiniSAS HD to MiniSAS Cbl |
Product | 729552-B21 | HP H221 PCIe 3.0 SAS HBA |
Product | 659486-B21 | HP Hot Plug Redundant Fan Kit |
Product | 709490-L21 | HP ML350p Gen8 E5-2650v2 FIO Kit |
Product | 652063-B21 | HP ML350pR08 SFF CTO Server |
Product | E2D55A | HP MSA 300GB 6G SAS 10K 2.5in DP ENT HDD |
Rack Mount Kit | 667274-001 | Rack bezel ear kit - Includes the left and right rack ears with release levers, the discovery service cable (for the left rack ear), and two server base blank covers |
Rack Mount Kit | 519318-001 | Rack mount kit - 1U/2U form factor - Includes mounting hardware, and left and right sliding rails with brackets |
Rail Kit | 667272-001 | 3U to 7U high rack mounting rail kit - Includes the left and right rails, and cable management arm |
Storage System | AJ941A | HP StorageWorks D2700 Disk Enclosure |