Keyword |
Part Number |
Description |
| RB2-5531-000CN | Blanking cover - Located behind the cartridge release lever |
| RB2-5526-000CN | Cartridge guide - Plastic structure with cartridge guide slot molded into it - Mounts on the upper front side of the registration assembly |
| RB2-5529-000CN | Chassis foot - Support for left side of printer chassis - Two used |
| RB2-5528-000CN | Connector link - Door ajar flag |
| RB3-1349-000CN | Control panel overlay - For 110V application |
| RB2-5652-000CN | Cover hinge - Half of hinge that attaches to front cover |
| RB2-5570-020CN | Door dampener hinge mount - Left side/fuser door dampener mount (two used) |
| RB2-5690-000CN | Face up paper output tray - Face up paper output tray - Paper output tray on left side |
| RG5-5647-070CN | Face-up delivery assembly |
| RB2-5607-020CN | Fan cover - Metal cover for fan #5 - Cartridge fan cover |
| RB2-5654-000CN | Front cover hinge - Hinge half that attaches to front of printer |
| RB2-5517-020CN | Front fusing assembly mount |
| RB2-5515-000CN | Front fusing rail - Front rail support for fusing assembly |
| RB2-5523-000CN | Fuser electrical contact leaf spring |
| RG5-5700-030CN | Fuser jam removal knob |
| C8519-69035 | Fusing Assembly - For 100 VAC to 127 VAC - Bonds toner to paper with heat |
| RH2-5445-000CN | High voltage power supply ribbon cable |
| RB2-5640-000CN | Laser shutter - Cartridge shutter actuator - Piece that opens cartridge shutter as it is inserted into the printer |
| RB2-5547-000CN | Left side alignment latch for front door |
| RB2-6007-000CN | Left side door - Left cover that diverter assembly attaches to |
| RB2-5689-000CN | Lower right cover - Small plastic piece below right door assembly |
| RB2-6077-000CN | Microswitch lever - Activates interlock switches from both the front and left doors |
| RB2-5661-000CN | ON/OFF switch push rod |
| C8568-67902 | Optional Tray 1 assembly - Complete Tray 1 assembly including rollers and mechanical drives |
| RB2-5522-000CN | Paper pickup guide - Plastic shaft with several fins on it - Mounts on the upper right side of the print engine frame assembly |
| RG5-5701-000CN | Rear cover assembly |
| RB2-5518-020CN | Rear fusing assembly mount |
| RB2-5516-000CN | Rear fusing rail |
| RB2-5655-000CN | Retaining clip - Retainer clip - Secures front cover strap to printer |
| RB2-5697-000CN | Right front inside corner cover |
| RB2-5684-000CN | Right rear cover - small cover strip on rear side of right cover assembly |
| RB2-6035-000CN | Sensor flag - Long rod with forked flag toward one end and curved flag at the other - Bin full sensor flag |
| RB2-6036-000CN | Sensor flag - Short rod with two flat flags and a curved end flag - Fuser delivery flag - Mounts at the rear bottom of the support bracket in the delivery assembly |
| RF5-3404-000CN | Separation roller - For tray 1 assembly |
| RB2-5639-000CN | Shutter arm - Provides mechanical link to laser shutter |
| RB2-5660-000CN | Top left cover - Face down paper output cover - Located on the left side portion of the top cover |
| RG5-5651-030CN | Transfer guide assembly (Ribbed plastic piece) - Has slot for the transfer roller assembly |
| RF5-3319-000CN | Transfer roller - Includes the long black spongy roller, roller shaft, and drive gear - Transfers static charge to the paper |
| RB2-5664-000CN | Tray 1/MP Tray cable cover |
| RF5-3338-000CN | TRAY 2 ROLLER - One used as a separation roller (in the top center of the 500-sheet paper cassette tray) and the other as a pickup roller (in the center of the paper pickup assembly) |
Cable | RG5-8021-000CN | Cable assembly |
Cable | RG5-5770-000CN | Cable assembly - Door interlock microswitch cable |
Cable | RG5-8025-000CN | Cable assembly - Fuser power cable |
Cable | RG5-5764-000CN | Cable assembly - Grounding cable for tray 1 - Tray 1/MP tray grounding cable - From printer chassis to tray 1/MP tray |
Cable | RG5-5759-000CN | Fan connecting cable - For both Fan 1 and 2 |
Cable | RG5-7783-000CN | Fan connecting cable - Mounts on the rear of the printer |
Cable | RG5-5725-030CN | Fan control cable - Includes cable and holder - On back of printer routes cable around DC controller PC board |
Cable | RG5-7786-000CN | Fan control cable assembly - Includes the cable assembly and holder - Mounts on the rear of the printer and routes cable around the DC controller board |
Cable | RG5-8034-000CN | Fusing assembly high voltage cable and connectors |
Cable | RG5-6249-000CN | Jetlink connector grounding cable |
Cable | RG5-6240-020CN | Jetlink connector socket and cable |
Cable | RG5-5722-030CN | Main cable harness and holder assembly |
Cable | RG5-8038-000CN | Multi-purpose/tray 1 cable assembly |
Cable | RG5-5723-000CN | Upper cable guide assembly |
Cable | RG5-7787-000CN | Upper cable guide assembly - Includes the two upper cables and support bracket - Mounts in the top of the printer |
Cable (Interface) | C2951A | IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
Cable (Interface) | 5063-1256 | IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long - Connects to HP Vectra and IBM PC/AT/XT compatibles (replacement for C2950A) |
Cap | RB2-5675-000CN | Right cover cap - Small push-in screw cover cap |
Cartridge | C8543X | HP Ultra-Precise print cartridge (Smart print cartridge) - Will print approximately 30,000 pages based on a 5% print density |
Caster | RB2-7709-020CN | Caster |
Caster | RB3-0304-050CN | Front swivel caster - Mounts on the bottom frame of the 2,000-sheet paper feeder assembly (two used) |
Caster | RB2-7678-030CN | Stationary rear caster - Mounts on the bottom frame of the 2,000-sheet paper feeder assembly (two used) |
Cleaning Supplies | 5090-3379 | Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills |
Clip | XD2-1100-502CN | E-ring clip - For the transport roller |
Clip | XD2-1100-322CN | E-ring retainer clip |
Connector | RG5-5779-030CN | Jetlink connector - Connector between tray 4 and printer engine |
Contact | RG5-5717-020CN | Toner cartridge contact assembly |
Cover | RB2-7648-040CN | Front cover and handle asembly - Plastic cover the protects the fornt side of the 2,000-sheet paper feeder tray 4 assembly |
Cover | RG5-5702-050CN | Front cover assembly - Large door above trays 2 and 3 |
Cover | RG5-5721-000CN | Front inside cover - Cover behind front drop down cover |
Cover | RB2-5685-000CN | Left back cover - Narrow strip covering the left rear corner of the printer |
Cover | RF5-3645-000CN | Left cover for the 2,000-sheet paper feeder assembly |
Cover | RB2-7651-000CN | Left rear cover for the 2,000-sheet paper feeder assembly |
Cover | RG5-5705-030CN | Left upper cover - Small cover above left door |
Cover | RB2-6491-000CN | Left upper cover - Small piece above left door |
Cover | RB2-5687-000CN | Lower left cover - Smaller plastic piece below left door and diverter assembly |
Cover | RB2-5683-000CN | Lower left front corner cover for tray 2 and 3 - Does not include power button |
Cover | RB2-5682-000CN | Lower right front corner cover for tray 2 and 3 |
Cover | RF5-3644-020CN | Rear center cover for the 2,000-sheet paper feeder assembly |
Cover | RG5-5737-090CN | Right cover assembly - Includes all components attached to this door |
Cover | RB2-7649-000CN | Right cover for the 2,000-sheet paper feeder assembly |
Cover | RB2-7650-000CN | Right rear cover for the 2,000-sheet paper feeder assembly |
Cover | RG5-5811-040CN | Service cover assembly - Cover for pickup and separation rollers |
Cover | RB2-7652-000CN | Top cover for the 2,000-sheet paper feeder assembly |
Cover | RB2-5659-000CN | Top right cover - Located on the right side portion of the top cover |
Cover | RB2-5676-000CN | Tray 1 blanking cover |
Damper | RG5-5648-020CN | Left door damper assembly - Supports drop down door on left side of printer - Two used |
Delivery | RG5-5643-080CN | Delivery assembly - Includes the curved plastic structure, various rollers and gears, and the L shaped metal support structure with three fans |
Door | RG5-5646-070CN | Left door and diverter assembly |
Drive | J6073-61021 | 20GB high performance hard disk - Plugs in one of the extended input/output (EIO) slots |
Drive | J6073-69021 | 20GB high performance hard drive - Plugs in one of the Extended Input/Output (EIO) slots |
Drive | RG5-5656-080CN | Drum feed drive assembly - Drives OPC drum in print cartridge |
Drive (Product) | J6073A | High performance 20GB hard disk - Plugs in one of the Extended Input/Output (EIO) slots |
Drive (Product) | J6073G | High performance 20GB hard disk - Plugs in one of the Extended Input/Output (EIO) slots |
Drive Assembly | RG5-6228-060CN | Feed drive assembly - Includes the drive motor (M303), support bracket, and the four drive gears - Mounts in the 2,000-sheet paper feeder assembly |
Drive Assembly | RG5-5659-070CN | Fuser delivery drive assembly - Includes gears, motor and microswitch for fuser drive - Also drives delivery roller |
Drive Assembly | RG5-7789-050CN | Fuser delivery drive assembly - Includes gears, motor and microswitch for fuser drive - Also drives delivery roller |
Duplexer | C8532-69003 | Duplexer assembly - Enables double-sided printing by flipping the page over in the printing process |
Duplexer | C8532A | Duplexer assembly kit - Required for two-sided printing - Includes the duplexer assembly and installation instructions (multi-lingual) |
Fan | RH7-1623-000CN | Controller board tubeaxial fan |
Fan | RG5-5645-020CN | Delivery cross member assembly - Includes the L shaped support bracket with the rear delivery fan (fan 3), front delivery fan (fan 4), and face down tray fan (fan 6) |
Fan | RH7-1659-000CN | Tubeaxial fan |
Fan | RH7-1661-000CN | Tubeaxial fan |
Fan | RG5-5729-000CN | Tubeaxial fan - (Fan 5 - Toner cartridge fan) - Mounts on the upper right of the print engine frame assembly |
Fan | RH7-5306-000CN | Tubeaxial fan (#5) - Provides air to the cartridge area |
Fan | RH7-1657-000CN | Tubeaxial fan (fan 1) - Provides air to the power supply - (Fan 1) - For the power supply - Mounts on the right rear of print engine |
Fan | RH7-1658-000CN | Tubeaxial fan (fan 4) - Mounts on the upper left crossmember on the delivery assembly |
Fax Module | Q1314A | Multi Functional Printer analog FAX accessory - Includes three language user manual, both parallel cables, phone cord, power module and power cord |
Film (Transparency) | C2934A | Color LaserJet transparency film - A size (8.5 x 11-inches) - 50 sheets |
Film (Transparency) | 92296T | LaserJet printer transparency film - A size (8.5 x 11-inches) - 50 sheets |
Firmware | Q7725-68000 | 32MB compact flash memory firmware - For LaserJet 9040/9050 series - Firmware version 08.140.5 |
Flag | RB2-6037-000CN | Sensor flag - Short rod with two flags on it - Delivery sensor flag |
Foot | RB1-6421-000CN | Chassis foot - Support for right side of printer chassis - Two used |
Fuse | VD7-0643-151CN | Fuse - 3.15A, 250V max - Fuse - 3.15A, 250V - Used in main power supply (240V, 50Hz) |
Fuse | VD5-0246-301CN | Low voltage power supply fuse - 110V |
Fusing Assembly | RG5-5750-270CN | Fusing Assembly - For 100 VAC to 127 VAC - Bonds toner to paper with heat |
Fusing Assembly | C8519-69036 | Fusing Assembly - For 220 VAC to 240 VAC - Bonds toner to paper with heat |
Fusing Assembly | RG5-5751-270CN | Fusing Assembly - For 220 VAC to 240 VAC - Bonds toner to paper with heat |
Gear | RS5-0708-000CN | 21-tooth gear |
Guide | RB2-6541-000CN | Rivets - Paper size guide for MP/Tray 1 |
Guide | RG5-5654-000CN | Transfer roller guide - Mounts to the top of the base structure of the transfer roller assembly |
Handle | RB2-5828-000CN | Registration guide handle |
Holder | RG5-5724-050CN | Fuser connector holder assembly |
Holder | RG5-5653-030CN | Transfer roller holder assembly - Includes the base structure, latch, anti-static brush, pressure springs, bushings, and contact springs - Assembly that the transfer roller mounts in |
Hook | RB2-6537-000CN | Cover hook - Used to mount the optional tray 1 assembly to the right side of the printer - Mounts on the top corners of the assembly (two used) |
Housing | RB2-7662-000CN | Jetlink connector housing and cable holder assembly |
Input Assembly | C8531A | HP 2000 Sheet High Capacity Input Tray |
Interface (Product) | J3258B | External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN |
Interface (Product) | J4102B | External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
Interface (Product) | J6060A | HP Jet Direct 300X external print server module (Three pack) (10Base-T and 100Base-T) - Connects between printer parallel port and LAN network - Three Pack |
Interface (Product) | J3258A | HP JetDirect 170X external print server |
Interface (Product) | J3258G | HP JetDirect 170X external print server module (10Base-T) - Connects between printer parallel port and LAN network |
Interface (Product) | J4102C | HP Jetdirect 170x Office Connect Print Server |
Interface (Product) | J6035C | HP JetDirect 175X external print server - Has on 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port |
Interface (Product) | J6035A | HP JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port |
Interface (Product) | J6035B | HP JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port |
Interface (Product) | J6035D | HP JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port |
Interface (Product) | J3263G | HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network |
Interface (Product) | J4101B | HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network |
Interface (Product) | J6061A | HP JetDirect 380X external IEEE-802.11b (Wi-Fi) wireless print server - Connects to printer using Universal Serial Bus (USB) cable |
Interface (Product) | J3265G | HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
Interface (Product) | J7934G | HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM |
Interface (Product) | J7960G | HP Jetdirect 625n internal ethernet print server - Provides 10BaseT, 100BaseTX, or 1000BaseT interface for products with an EIO port |
Interface (Product) | J7961G | HP Jetdirect 635n IPv6/IPsec Print Server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM |
Interface (Product) | J6058A | HP JetDirect 680N internal wireless IEEE-802.11b (Wi-Fi) print server - Plugs into peripheral EIO slot |
Interface (Product) | J7942A | HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module |
Interface (Product) | J7942G | HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module |
Interface (Product) | J4169A | JetDirect 610N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual |
Interface (Product) | J7934-69011 | JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector |
Interface (Product) | J4135A | JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO slots on selected DesignJet and LaserJet printers |
Knob | RB2-5845-000CN | Jam removal knob - Green knurled knob used to clear paper jams from paper registration area |
Label | Q2593A | White address labels - 1.3cm (0.5in) x 4.4cm (1.7in) - 80 labels per sheet, 25 sheets per box |
Label | Q2590A | White address labels - 3.4cm (1.3in) x 10cm (4in) - 14 labels per sheet, 100 sheets per box |
Label | Q2589A | White address labels - 3.4cm (1.3in) x 10cm (4in) - 14 labels per sheet, 25 sheets per box |
Label | Q2592A | White address labels - 5cm (2in) x 10cm (4in) - 10 labels per sheet, 100 sheets per box |
Label | Q2591A | White address labels - 5cm (2in) x 10cm (4in) - 10 labels per sheet, 25 sheets per box |
Label | Q2594A | White address labels - 8.4cm (3.3in) x 10cm (4in) - 6 labels per sheet, 100 sheets per box |
Label | Q2551A | White full-sheet labels - A size (8.5 x 11-inches) - 100 sheets |
Label | Q2550A | White full-sheet labels - A size (8.5 x 11-inches) - 25 sheets |
Label | Q2588A | White labels - 2.5cm (1.0in) x 6.6cm (2.6in) - 30 labels per sheet, 100 sheets per box |
Label | Q2587A | White labels - 2.5cm (1.0in) x 6.6cm (2.6in) - 30 labels per sheet, 25 sheets per box |
Laser/Scanner | RG5-5826-090CN | Laser/Scanner assembly - Mounts on the support structure in the print engine frame assembly |
Latch | RB2-5700-000CN | Front cover latch - Roller latch that holds front cover |
Latch | RG5-5704-040CN | Latch mount assembly |
Latch | RG5-5740-020CN | Right cover latch handle assembly |
Lever | RG5-5746-030CN | Cartridge release lever assembly - Lever used to release print cartridge for removal |
Lever | RB2-5813-000CN | Custom/standard media size selection switch lever - Mounts on the left side of the 500-sheet paper input tray |
Lever | RB2-7762-020CN | Paper size switching lever - To adjust paper size in tray (standard or custom size) |
Lifter | RG5-5741-040CN | Cartridge lifter assembly |
Maintenance Kit | C9152-67907 | LaserJet 9000 series Maintenance Kit - For 120 VAC - Replacement parts after 350k pages -Includes Fusing Assembly, seven Feed/Separation rollers, two Pickup rollers and one Transfer roller |
Maintenance Kit | C9152-67906 | LaserJet 9000 series maintenance kit - For 120 VAC - Replacement parts after 350k pages -Includes fusing assembly, seven feed/separation rollers, two pickup rollers, and one transfer roller |
Maintenance Kit | C9152-69007 | Maintenance kit - For 120 VAC - Replacement parts after 350k pages - Includes fusing assembly, seven feed/separation rollers, two pick-up rollers and transfer roller |
Maintenance Kit | C9153-67907 | Maintenance Kit - For 220 VAC - Replacement parts after 350K pages - Includes, fusing assembly, seven feed/separation rollers, two pickup rollers and transfer roller |
Maintenance Kit | C9153-69007 | Maintenance Kit - For 220 VAC - Replacement parts after 350K pages - Includes, fusing assembly, seven feed/separation rollers, two pick-up rollers and transfer roller |
Maintenance Kit | C9152A | Maintenance Kit (120V) - Replacement parts after 350K pages includes, Fusing assembly, seven Feed/Separation rollers, two Pickup rollers and Transfer roller assembly |
Maintenance Kit | C9153A | Maintenance Kit (220V) - Replacement parts after 350K pages - Includes, fusing assembly, seven feed/separation rollers, two pickup rollers and transfer roller |
Manual | Q3721-90934 | LaserJet 9000/9050 series combined service manual |
Memory (DIMM) | Q7718AX | 128MB DDR DIMM |
Memory (DIMM) | Q7709-67951 | 128MB, 100-pin SDRAM DIMM memory module |
Memory (DIMM) | Q7718A | 128MB, 100-pin, DDR DIMM |
Memory (DIMM) | Q7718-67951 | 128MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (DIMM) | C7843-67901 | 16MB, 100-pin SDRAM DIMM memory module |
Memory (DIMM) | Q7719-67951 | 256MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (DIMM) | Q7719AX | 256MB DDR DIMM |
Memory (DIMM) | Q7719A | 256MB, 100-pin, DDR DIMM |
Memory (DIMM) | Q7713AX | 32MB DDR DIMM |
Memory (DIMM) | Q7707-67951 | 32MB, 100-pin SDRAM DIMM memory module |
Memory (DIMM) | Q7713-67951 | 32MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (DIMM) | Q7720AX | 512MB DDR DIMM |
Memory (DIMM) | Q7720-67951 | 512MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (DIMM) | Q7715AX | 64MB DDR DIMM |
Memory (DIMM) | Q7708-67951 | 64MB, 100-pin SDRAM DIMM memory module |
Memory (DIMM) | Q2625A | 64MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (DIMM) | Q7715-67951 | 64MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (Product) | Q7709AX | 128MB, 100-pin SDRAM DIMM memory module |
Memory (Product) | C7843A | 16MB, 100-pin SDRAM DIMM memory module |
Memory (Product) | Q7707AX | 32MB, 100-pin SDRAM DIMM memory module |
Memory (Product) | Q1887A | 64MB, 100-pin SDRAM DIMM memory module |
Memory (Product) | C4293A | 8MB simplified Chinese MROM DIMM - For LaserJet printers |
Memory (Product) | C4292A | 8MB Traditional Chinese MROM DIMM - For LaserJet printers |
Memory (Product) | Q2628A | HP 512MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (Product) | Q7720A | HP 512MB 100-Pin DDR DIMM |
Memory (Product) | Q7715A | HP 64MB 100-Pin DDR DIMM |
Memory Module | Q7730-67901 | 16MB Compact flash memory card - Traditional Arabic font |
Memory Module | Q7728-67901 | 16MB Compact Flash memory card - Traditional Cyrillic font |
Memory Module | Q7728AB | 16MB Compact flash memory card - Traditional Cyrillic font |
Memory Module | Q7729-67901 | 16MB Compact flash memory card - Traditional Greek font |
Memory Module | Q7729AB | 16MB Compact flash memory card - Traditional Greek font |
Memory Module | Q7727-67901 | 16MB Compact flash memory card - Traditional Hebrew font |
Memory Module | Q7725DD | 32MB flash memory - Firmware version 8.102.2 - For LaserJet 9050 |
Memory Module | Q7725DE | 32MB flash memory - Firmware version 8.102.2 - For LaserJet 9050 |
Memory Module | Q7730AB | Compact flash card - Traditional Arabic font |
Memory Module | Q7727AB | Compact flash card - Traditional Hebrew font |
Motor | RH7-1481-020CN | Deck drive motor (M303) only - Mounts in the 2,000-sheet paper feeder assembly |
Motor | RH7-1656-000CN | Drum feed drive motor |
Motor | RH7-5288-000CN | Fuser delivery motor - 24VDC - Provides power for fuser delivery drive assembly |
Motor | RH7-1622-000CN | Fuser delivery motor (24 VDC) - Provides power for fuser delivery drive assembly |
Mount | RG5-5709-000CN | Front pressure mount for toner cartridge |
Mount | RG5-5710-000CN | Rear pressure mount for toner cartridge |
Overlay | RB2-5703-000CN | Control panel overlay - For 220V application |
Paper | HPT1122 | HP All-In-One paper- A size (8.5 x 11-inches) - 10 reams |
Paper | HPT115 | HP All-In-One Paper- A size (8.5 x 11-inches) - 5 reams |
Paper | HPBC11 | HP Business Copy Paper - A size (8.5 x 11-inches) - 500 sheets |
Paper | HPDC17 | HP Digital Copy Paper - B size (11 x 17-inches) - 500 Sheets per package |
Paper | HPA510 | HP Everyday Copy and Print Paper - A size (8.5 x 11-inches) - 500 sheets |
Paper | HPJ1424 | HP LaserJet Paper - 21.6cm (8.5in) x 35.5cm (14in) - 500 sheets |
Paper | HPJ1124 | HP LaserJet Paper - A size (8.5 x 11-inches) - 500 sheets |
Paper | HPJ113H | HP LaserJet Paper - A size (8.5 x 11-inches),3 hole - 250 sheets |
Paper | HPJ1724 | HP LaserJet Paper 11 x 17 |
Paper | HPJ115R | HP LaserJet Paper 8.5 x 11 |
Paper | HPM115R | HP Multipurpose Paper - A size (8.5 x 11-inches) - 5 reams |
Paper | HPM1120 | HP Multipurpose Paper - A size (8.5 x 11-inches) - 500 sheets |
Paper | HPM113H | HP Multipurpose Paper - A size (8.5 x 11-inches), 3 hole - 500 sheets |
Paper | HPM1720 | HP Multipurpose Paper - B size (11 x 17-inches) - 500 Sheets per package |
Paper | HPM1420 | HP Multipurpose Paper - Legal size (8.5 x 14 inches) - 500 sheets |
Paper | HPC8511 | HP Office Paper - A size (8.5 x 11-inches) - 10 reams |
Paper | HPC3HP | HP Office Paper - A size (8.5 x 11-inches) - 3 hole - 10 reams |
Paper | HPC1117 | HP Office Paper - B size (11 x 17-inches) - 500 Sheets per package |
Paper | HPC8514 | HP Office Paper - Legal size (8.5 x 14 inches) - 10 reams |
Paper | HPE1120 | HP Office Recycled Paper - A size (8.5 x 11-inches) - 10 reams |
Paper | HPU1132 | HP Premium Choice LaserJet Paper - A size (8.5 x 11-inches) - 500 sheets |
Paper | HPU1732 | HP Premium Choice LaserJet Paper - Tabloid size (11 x 17-inches) - 250 sheets per package |
Paper | HPP1122 | HP Printing Paper - A size (8.5 x 11-inches) - 500 sheets |
Paper | Q1298A | LaserJet Satin Finish Tough Paper - A size (8.5 x 11-inches) - Will not tear and will withstand outdoor weather conditions - Can print on both sides |
Paper | Q2413A | Premium LaserJet Cover Paper - Heavyweight (75lb), smooth finish on both sides, 96 brightness - A size (8.5 x 11-inches) - 100 sheets per box |
Paper (Glossy) | Q2422A | High Gloss Laser Paper - A3 size (29.7cm x 42.0cm) - 200 sheets |
Paper (Glossy) | Q2420A | High Gloss Laser Paper - B size (11 x 17-inches) - 200 sheets |
Paper (Glossy) | Q2419A | High gloss LaserJet paper - High gloss finish on both sides, 95 brightness - A size (8.5 x 11-inches) - 200 sheets per box |
Paper (Glossy) | Q2421A | High gloss LaserJet paper - High gloss finish on both sides, 95 brightness - A4 size (21.0cm x 29.7cm) - 200 sheets per box |
Paper (Glossy) | Q2546A | HP Color Laser Glossy Presentation Paper - A size (8.5 x 11-inches) - 300 sheets |
Paper (Glossy) | Q6541A | HP Color Laser Soft-gloss Presentation Paper - A size (8.5 x 11-inches) - 200 sheets |
Paper (Glossy) | Q2418A | Soft Gloss Laser Paper - A3 size (29.7cm x 42.0cm) - 250 sheets |
Paper (Glossy) | Q2416A | Soft Gloss Laser Paper - B size (11 x 17-inches) - 500 sheets |
Paper (Glossy) | Q2415A | Soft gloss LaserJet paper - Soft gloss finish on both sides, 95 brightness - A size (8.5 x 11-inches) - 500 sheets per box |
Paper (Glossy) | Q2417A | Soft gloss LaserJet paper - Soft gloss finish on both sides, 95 brightness - A4 size (21.0cm x 29.7cm) - 250 sheets per box |
Paper Feeder | RG5-5681-090CN | Paper input whole unit assembly - For printer/engine - Paper pickup assembly - Picks paper from Trays 2 and 3 - Includes feed rollers and paper pickup PC board |
Paper Path Module | RG5-6227-040CN | Paper path connection assembly - Directs paper from the high capacity input assembly output to the vertical input path on the print engine - - For the 3500-sheet paper feeder |
Paper Path Module | RG5-6225-100CN | Vertical registration assembly - For tray 4 |
PC Board | RG5-8009-000CN | Cartridge memory controller board - Between ECU and the toner cartridge memory antenna |
PC Board | RG5-6235-150CN | Controller PC board |
PC Board | RG5-7780-060CN | DC controller board assembly |
PC Board | RG5-8013-000CN | Delivery assembly PC board |
PC Board | Q3721-69008 | Formatter board - Main logic PCA - Base unit model only |
PC Board | Q3721-67904 | Formatter board - Main logic PCA - Not for use in N and DN models |
PC Board | Q3722-69002 | Formatter board (main logic) PCA - Use for N and DN models only |
PC Board | RG5-6239-020CN | LED board - Small PC board with two LEDs and a connector - For indicating the operating status |
PC Board | RG5-5719-100CN | Memory controller PC Board - Toner cartridge |
PC Board | RG5-7896-000CN | Paper pickup board |
PC Board | RG5-6238-020CN | Paper size PC board |
PC Board | RG5-6237-020CN | Paper volume sensor board |
Pickup Assembly | RG5-6208-180CN | Paper pick-up assembly - For paper input tray 4 |
Power Supply | RG5-5728-100CN | High voltage power supply board |
Power Supply | C8519-69037 | High voltage power supply board - Mounts on the upper rear of the printer |
Power Supply | RG5-5730-000CN | Low voltage power supply - 110 VAC input |
Power Supply | RG5-7778-030CN | Low voltage power supply assembly - For 100-127VAC operation - Mounts on the upper rear of the printer |
Power Supply | RM1-7354-000CN | Low voltage power supply assembly - For 220-240 VAC operation - Mounts on the upper rear of the printer |
Power Supply | RG5-6250-040CN | Power supply assembly |
Protector | Q1299A | Sheet protectors - 0.1mm (4.0 mil) thick polypropylene sheet protectors for A size (8.5-inches x 11-inches) documents - Has top and side openings for easy insertion and removal of documents - 50 sleeves per box |
Rail | RG5-5718-000CN | Cartridge guide rail - Right side toner cartridge guide rail |
Rail | RG5-5714-020CN | Left lower rail assembly |
Rail | RG5-5713-020CN | Left upper rail assembly |
Rail | RG5-5715-030CN | Right rail assembly |
Receptacle | RG5-5727-030CN | A/C power input receptacle module and power switch |
Retainer | XA9-0135-000CN | Push nut retainer - (Three used) |
Roller | RF5-3340-000CN | Paper pick-up and feed roller assembly - Rubber roller with drive gear - Located in paper input unit (two used) |
Roller | RF5-3403-000CN | Pick-up roller for optional tray 1 |
Roller Assembly | RG5-5663-060CN | Registration roller assembly |
Screw | XA9-1500-000CN | M3 pan-head Phillips screw with flat washer - 8mm long |
Screw | XA9-0596-000CN | M3 X 6 screw |
Screw | XA9-1420-000CN | M3 X 8mm pan head phillips screw with captive flat and split-lock washers |
Screw | XA9-1566-000CN | M3X6 pan-head Phillips screw with annular nails - 8mm long |
Screw | XB6-7303-005CN | Machine screw - M3, 30mm long with self-tapping threads - Typically used to hold metal to plastic |
Screw | XA9-1466-000CN | Machine screw with captured washer - M3 X 29.5mm long |
Screw | XA9-0912-000CN | Machine screw with captured washer - M5 X 12 - Typically used to secure plastic parts to metal |
Screw | XB2-6300-607CN | Screw - M3 X 6mm long |
Screw | XA9-0994-000CN | Screw - M4 x 6mm long |
Screw | XA9-1448-000CN | Screw - M4 X 8mm long |
Screw | XA9-0265-000CN | Screw with captured washer - To hole plastic to metal - M4X6 |
Screw | XA9-0499-000CN | Screw with captured washer - Used to fasten plastic to metal - M4 X 6mm screw |
Screw | RS5-9099-000CN | Stepped screw - Larger shoulder screw used to fasten the left side cover to the frame of the 2,000-sheet paper feeder assembly (two used) |
Screw | XB6-7300-605CN | TP Screw - Pan/washer head machine screw - M3X6 |
Screw | XB6-7300-805CN | TP Screw - Pan/washer head machine screw - M3X8 |
Screw | XA9-1495-000CN | Wafer head machine screw - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal |
Sensor | RG5-5699-040CN | End paper sensor assembly - Contains Tray 2 and 3 paper length detection switches |
Sensor | RG5-6207-060CN | Paper size sensing assembly |
Sensor | RG5-6229-040CN | Paper volume sensing assembly |
Spring | RS6-2302-000CN | Compression spring - Provides tension for ON/OFF switch |
Spring | RS6-2301-000CN | Compression spring - provides tension for right cover latch |
Spring | RS6-2296-000CN | Laser shutter spring - Provides tension for laser shutter |
Spring | RS6-2299-000CN | Shutter Arm Tension Spring |
Spring | RS6-2285-000CN | Tension spring |
Spring | RS6-2298-020CN | Tension spring |
Spring | RB2-6042-000CN | Torsion spring - Provides tension for bin full flag |
Spring | RB2-5816-000CN | Torsion spring - Provides tension for paper selector switch |
Stacker Assembly | C8088B | HP Multifunction Finisher - Has stacking, offset, stapling, booklet making and page by page folding capabilities |
Stacker Assembly | C8084A | Optional 3,000-sheet paper output stacker assembly - Stacks up to 3000 sheets of standard paper(20-lb bond) on the stacker bin, has job offset capabilities for easy handling, and job separation (first page offset) for shared environments |
Stacker Assembly | C8085A | Optional 3000 sheet stapler/stacker assembly - Stacks up to 3000 sheets of standard paper (20-lb bond) on the stapler bin, staples in multiple positions up to 50 sheets, and has job offset capabilities for easy handling |
Staple Cartridge | C8092A | Replacement staple cartridge assembly - Holds 5000 staples - For use with the multifunction finisher assembly |
Staple Cartridge | C8091A | Sstaple cartridge - Contains 5000 staples |
Staple Cartridge | Q7829-67921 | Staple cartridge - Contains 5000 staples - For the add-on staple/stacker unit |
Strap | RB2-5653-000CN | Restraining strap - Drop down support for front cover assembly |
Switch | WC4-5136-000CN | Black toner cartridge switch - Detects when black cartridge is in correct position - SW644 |
Switch | RG5-6206-030CN | Switch assembly - Custom/standard paper switch |
Torque Limiter | RB2-5759-000CN | Torque limiter - Limits rotation of feed rollers |
Transfer Assembly | RG5-5662-050CN | Transfer roller assembly - Includes both transfer guides and transfer roller |
Tray | RG5-5635-110CN | 500-sheet paper cassette - Paper cassette used for tray 2 and tray 3 |
Tray Assembly | C8568A | HP LJ9000 series Multipurpose Tray - Tray 1 assembly |
Tray Assembly | RG5-5809-060CN | Multi-purpose/tray 1 - Optional tray 1 drop down paper input tray assembly - Includes drop down flip output tray and paper width guides |
Tray Assembly | C8531-69018 | Tray 4 assembly (complete) - 2,000-sheet high capacity paper feeder assembly |
Unknown Keyword | J4135-61001 | JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO Slots on selected DesignJet and LaserJet printers (Part of J4135A) |
Unknown Keyword | XA9-1273-000CN | M4 X 12mm Indented pan head screw |