Keyword |
Part Number |
Description |
| RA0-1172-000CN | 17-tooth gear assembly - Includes the 17-tooth gear mounted on a black plastic lever/bracket - Mounts to the right side plate |
| WT2-5056-000CN | Cable clip - `C` shaped White plastic - Mounts in the opening on the cover for the paper pickup solenoid |
| RA0-1003-000CN | Rubber foot - For bottom of printer - Three used |
Arm | RC1-4055-000CN | Door arm - White plastic arm that connects to left side cartridge access door |
Belt | RB2-6273-000CN | Paper feed belt - Paper feed belt - Long narrow rear belts - Two used |
Bushing | RC1-4189-000CN | Gear stopper - Small bushing between right side of registration assembly and registration roller drive gear |
Bushing | RC1-4105-000CN | Inner bushing - Bushing that large white 201 tooth drive gear rides on |
Bushing | RC1-0922-000CN | Roller bushing - Right side transfer roller bushing |
Bushing | RC1-3665-000CN | Shaft bushing/retainer - Small plastic cylinder with four nubs that twist - Locks into the side frame |
Bushing | RB2-2973-000CN | Support bushing - Pressure Roller Support Bushing - Two used |
Bushing | RB2-2850-000CN | Upper delivery roller bushing - Roller bushing - Supports face-down upper delivery roller |
Cable | RG5-5568-000CN | Cable and guide assembly - Cables run between solenoids and engine controller board |
Cable | RG5-1928-000CN | Registration cable assembly - Includes 7P and 3P connectors |
Cable (Interface) | RM1-1401-020CN | Duplexer interface cable |
Cable (Interface) | C2951A | IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
Cable (Interface) | 5063-1256 | IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long - Connects to HP Vectra and IBM PC/AT/XT compatibles (replacement for C2950A) |
Cable (Interface) | 8121-0868 | Universal Serial Bus (USB) interface cable (Black) - Type 'A' connector to type 'B' connector - 1.83m (6.0ft) long |
Cam | RC1-4114-000CN | Cam - Located between large white 201-tooth gear and drive release lever |
Cam | RC1-4137-020CN | Contact cam - Vertical piece that inserts into protective plate |
Cartridge | Q6511X | HP LaserJet 2400 series print cartridge - Prints approximately 12,000 pages |
Cartridge | Q6511A | HP LaserJet 2400 series print cartridge - Prints approximately 6,000 pages |
Clamp | WT2-5694-000CN | Snap-in cable clamp - Secures the drive motor cable from the controller PC board to the metal support pan |
Connector | VS1-7257-007CN | Drawer connector - Connector located on top of tray assembly frame (right side), which connects tray assemblies to each other |
Contact | RC1-4060-000CN | Grounding contact - Tiny U-shaped metal cartridge grounding contact - Contacts copper grounding strip on left side of toner cartridge |
Control Panel | RM1-1519-000CN | Control panel assembly - Control panel mounted on top right corner of printer |
Coupler | RG9-1473-000CN | Coupling assembly - Engages drive gear assembly |
Coupler | RB2-2935-000CN | Gear coupler - Between plate bushing and largest drive gear |
Cover | RC1-4000-000CN | Cable cover - Fuser cable cover - Black plastic cover that protects cable in left rear portion of printer |
Cover | RC1-4108-000CN | Cover for main motor M1 - Located on lower right side of printer |
Cover | RC1-3954-000CN | Gear cover - Covers fusing and duplexer gears on lower right rear of printer |
Cover | RC1-4148-000CN | Left cover - Left side of printer plastic cover |
Cover | RG5-5546-000CN | Rear cover - Includes face-down output tray assembly |
Cover | RM1-1517-020CN | Rear cover assembly - Drop down face up paper output tray assembly |
Cover | RC1-3936-020CN | Registration roller assembly cover |
Cover | RC1-4151-000CN | Right front cover - Right front corner of printer cover |
Cover | RC1-4157-000CN | Right lower cover - Small cover under slide out DIMM access cover |
Cover | RC1-4156-000CN | Right rear cover - Vertical cover at right rear of printer - Covers power input and I/O connectors |
Cover | RC1-4150-000CN | Right side cover - Removable right side cover for access to DIMM memory |
Cover | RC1-4159-000CN | Right top cover - Right side top case piece behind control panel |
Cover | RM1-1514-000CN | Top cover assembly - Top of printer cover and face down paper output tray assembly |
Door | RM1-1503-000CN | Door assembly - Cartridge access door assembly behind drop down Tray 1 assembly |
Drive Assembly | RM1-1522-020CN | Drive release assembly |
Drive Assembly | RM1-1512-000CN | Printer drive assembly - Located on the right side of printer |
Duct | RC1-4130-000CN | Air duct - Inside half of air duct from fan FM2 in lower right front corner of printer -Black plastic |
Duct | RC1-4131-000CN | Air duct - Outside half of air duct from fan FM2 in lower right front corner of printer -Black plastic |
Duct | RC1-4128-020CN | Plastic duct that vents air from the lower right front fan to the laser/scanner. |
Duct | RC1-4129-000CN | Small vent duct to route air from the fan (FM2) to the cartridge area |
Extender | RB2-3036-000CN | Tray 1 extender - Pull-out tray extension - Attaches to flip-out tray extender |
Fan | RK2-0573-000CN | Cooling fan - Fan FM2 - Located on lower left side of printer |
Fan | RK2-0571-000CN | Cooling fan - Main cooling fan FM1 - Located in lower right front side |
Feed Assembly | RM1-1504-000CN | Paper feed guide assembly |
Film (Transparency) | 92296T | LaserJet printer transparency film - A size (8.5 x 11-inches) - 50 sheets |
Film (Transparency) | 92296U | LaserJet printer transparency film - A4 size (21.0cm x 29.7cm) - 50 sheets |
Flag | RC1-4027-000CN | Sensor lever - Top of page sensor flag - Used to detect edge of paper |
Foot | RB2-6297-000CN | Rubber foot - Square self-adhesive rubber foot - Attaches to the bottom of the 500-sheet feeder (four used) |
Fuse | WD1-0268-000CN | Fuse - 15A, 250V max |
Fuse | RH3-8006-000CN | Fuse - 8A, 250V max - Power supply board fuse - For 220/240V operation |
Fusing Assembly | RM1-1535-080CN | Fuser assembly - For 110 VAC - Bonds toner to paper with heat |
Fusing Assembly | RM1-1537-050CN | Fusing assembly - For 220 VAC - Bonds the toner to the paper with heat |
Gear | RU5-0400-000CN | 12-tooth gear - On left side of registration roller assembly |
Gear | RU5-0379-000CN | 19-tooth gear - Located in the fuser drive assembly on right rear of printer |
Gear | RU5-0378-000CN | 20-tooth gear - Located in the fuser drive assembly on right rear of printer |
Gear | RU5-0377-000CN | 21-tooth gear - Located in the fuser drive assembly on right rear of printer |
Gear | RS6-0449-000CN | Cluster gear #10 - 25/41 tooth - 25 tooth/41 tooth cluster gear - Gear #10 |
Gear | RS6-0448-000CN | Cluster gear #11 - 17/68 tooth - 17 tooth/68 tooth cluster gear - Gear #11 |
Gear | RS6-0464-000CN | Feed belt drive gear - 20 tooth - Drive gear - Engages feed belt gear assembly - 20 tooth |
Gear | RU5-0366-000CN | Gear - 30-tooth - Attaches to right side end of tray 1 pickup roller shaft |
Gear | RU5-0389-000CN | Gear - Large white plastic 201 tooth gear on right side of printer |
Gear | RS6-0446-000CN | Gear #5 - 201 tooth gear - 201 tooth gear - Largest gear in assembly - Gear #5 |
Gear | RS6-0451-000CN | Printer drive gear #8 - 26 tooth - 26 tooth gear - Printer drive gear #8 |
Gear | RS6-0450-000CN | Printer drive gear #9 - 31 tooth - 31 tooth gear - Printer drive gear #9 |
Gear | RS6-0445-000CN | Registration roller drive gear - 14 tooth - Gear - 14 tooth - Drives registration roller |
Gear | RU5-0409-000CN | Registration roller gear - Mounts on the end of the registration roller - 14-tooth gear |
Gear | RU5-0375-000CN | Roller gear - White plastic 15 tooth gear that attaches to end of face-down paper output roller. |
Gear | RS6-0441-000CN | Upper delivery roller drive gear - 15 tooth - Drive gear - Upper delivery roller drive gear - 15 tooth |
Gear Assembly | RG5-4156-000CN | Cassette pickup gear assembly |
Gear Assembly | RM1-1500-000CN | Fuser drive side plate assembly - Drive gear assembly and mounting plate for fuser - Located on right side of printer |
Gear Assembly | RM1-1482-020CN | Paper pickup roller gear asembly - Gears that attach to Tray 2 pickup roller |
Ground Strap | RC1-4085-000CN | Grounding plate - High voltage power supply grounding plate - Attaches to left rear of power supply |
Guide | RC1-4006-000CN | Cable guide - Small black plastic tray that supports and protects cables that go across rear of printer behind laser scanner |
Guide | RC1-4107-000CN | Cartridge guide - Lower right side toner cartridge guide |
Guide | RC1-3950-000CN | Cassette guide - Rear left black plastic paper cassette guide |
Guide | RC1-3951-000CN | Cassette guide - Right front side black plastic paper cassette guide |
Guide | RC1-3953-000CN | Cassette guide - Right rear black plastic paper cassette guide |
Guide | RC1-4056-000CN | Door arm guide - White plastic guide for cartridge door lever |
Guide | RC1-3935-000CN | Feed guide assembly - Mounts above transfer roller assembly |
Guide | RC1-4096-000CN | Guide assembly - Duplexer portion paper input guide assembly |
Guide | RC1-3948-000CN | Left front guide - Small black plastic piece on front left side of chassis in Tray 2 cassette guide slot |
Guide | RC1-4122-000CN | Left lower toner cartridge guide |
Guide | RC1-3949-000CN | Left middle guide - Small black plastic cassette guide on left side of printer |
Guide | RC1-4121-020CN | Left upper toner cartridge guide |
Guide | RM1-1507-000CN | Lower feed guide assembly |
Guide | RC1-4083-000CN | Paper guide - Located under the registration roller assembly |
Guide | RM1-1506-000CN | Position guide assembly - Guides the paper along the right side duplex path - Attaches just above power supply |
Guide | RG5-5553-000CN | Position guide assembly (Plate with drive gear and rollers) - Mounts on the bottom of the internal chassis |
Guide | RC1-4106-020CN | Upper right toner cartridge guide |
Hinge | RC1-4057-000CN | Tray hinge - Left side hinge for drop down tray 1 assembly |
Hinge | RC1-4058-000CN | Tray hinge - Right side hinge for drop down tray 1 assembly |
Holder | RC1-4127-000CN | E-label reader holder - Housing that holds cartridge E-label reader |
Holder | RC1-4133-000CN | Main fan holder - Plastic fan holder for main cooling fan FM1 - Located lower right front side |
Holder | RC1-4009-000CN | Plate holder - Holds the left rear corner of the paper access plate (duplex pan) |
Holder | RC1-4126-000CN | Reader holder cover - Plastic housing that covers cartridge E-label reader and holder assembly |
Holder | RC1-3998-000CN | Roller holder - Holder for small paper delivery rollers at top rear of printer - Four used |
Holder | RF5-3279-000CN | Sensor lever holder |
Holder | RC1-3937-000CN | Separation pad holder |
Holder | RC1-3955-000CN | Solenoid holder/mount - Solenoid mount for solenoid SL2 |
Holder | RC1-4169-000CN | Switch link holder - Supports mechanical link between power button and ECU board |
Housing | RC1-4134-000CN | Fan holder - FM2 fan holder housing |
Interface (Product) | J3110A | Ethernet 10Base-T (RJ-45) EIO network internal print server PC board - Ethernet 10Base-T (RJ-45) EIO Network PCA |
Interface (Product) | J3111A | Ethernet 10Base-T/10Base2 and LocalTalk (RJ-45, BNC, LocalTalk) EIO network PCA - Ethernet 10Base-T/10Base2 & LocalTalk (RJ-45, BNC, LocalTalk) EIO Network PCA |
Interface (Product) | J3258B | External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN |
Interface (Product) | J4102B | External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
Interface (Product) | J6072A | HP bt1300 Bluetooth wireless printer adapter - Allows for wireless printing from Bluetooth enabled PCs, PDAs, phones, and cameras - Connects to either the parallel or USB port on the printer - Includes the power module and power cord |
Interface (Product) | J3296A | HP Jet Direct 300X external print server module (Three pack) (10Base-T and 100Base-T) - Connects between printer parallel port and LAN network - Three Pack |
Interface (Product) | J6060A | HP Jet Direct 300X external print server module (Three pack) (10Base-T and 100Base-T) - Connects between printer parallel port and LAN network - Three Pack |
Interface (Product) | J3258A | HP JetDirect 170X external print server |
Interface (Product) | J3258G | HP JetDirect 170X external print server module (10Base-T) - Connects between printer parallel port and LAN network |
Interface (Product) | J4102C | HP Jetdirect 170x Office Connect Print Server |
Interface (Product) | J6035C | HP JetDirect 175X external print server - Has on 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port |
Interface (Product) | J6035A | HP JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port |
Interface (Product) | J6035B | HP JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port |
Interface (Product) | J6035D | HP JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port |
Interface (Product) | J6035G | HP JetDirect 175XExternal Print Server - Includes setup poster, software, folding sleeve for storing the poster and CD, power adapter and 2-foot USB cable |
Interface (Product) | J3263G | HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network |
Interface (Product) | J4101B | HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network |
Interface (Product) | J6038A | HP JetDirect 310X external print server - Fast Ethernet Internet connector for sharing network peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB printer port and one RJ-45 10/100 Base-TX connector |
Interface (Product) | J6061A | HP JetDirect 380X external IEEE-802.11b (Wi-Fi) wireless print server - Connects to printer using Universal Serial Bus (USB) cable |
Interface (Product) | J3264A | HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN |
Interface (Product) | J3265G | HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
Interface (Product) | J7934G | HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM |
Interface (Product) | J7960G | HP Jetdirect 625n internal ethernet print server - Provides 10BaseT, 100BaseTX, or 1000BaseT interface for products with an EIO port |
Interface (Product) | J7961G | HP Jetdirect 635n IPv6/IPsec Print Server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM |
Interface (Product) | J6058A | HP JetDirect 680N internal wireless IEEE-802.11b (Wi-Fi) print server - Plugs into peripheral EIO slot |
Interface (Product) | J7942A | HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module |
Interface (Product) | J7942G | HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module |
Interface (Product) | J7951G | HP Jetdirect ew2400 802.11g wireless print server module - Includes power supply, USB cable, LAN/Ethernet cable, setup documentation and software |
Interface (Product) | J3112A | JetDirect 600N token ring LAN interface board - DB-9 and RJ-45 connectors |
Interface (Product) | J4169A | JetDirect 610N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual |
Interface (Product) | J4135A | JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO slots on selected DesignJet and LaserJet printers |
Interface (Product) | J6062A | JetDirect WP110 IEEE 802.11b (Wi-Fi) wireless print server - Connects to printer using parallel printer port |
Label | Q6556A | High quality self-adhesive labels - A4 size (21.0cm x 29.7cm) sheets, 105mm x 37mm labels, 16 labels per sheet - Box of 100 sheets |
Label | Q6553A | High quality self-adhesive labels - A4 size (21.0cm x 29.7cm) sheets, 105mm x 74mm labels - Box of 100 sheets |
Label | Q6552A | High quality self-adhesive labels - A4 size (21.0cm x 29.7cm) sheets, 148mm x 105mm labels, four labels per sheet - Box of 100 sheets |
Label | Q6551A | High quality self-adhesive labels - A4 size (21.0cm x 29.7cm) sheets, 148mm x 105mm labels, four labels per sheet - Box of 25 sheets |
Label | Q6560A | High quality self-adhesive labels - A4 size (21.0cm x 29.7cm) sheets, 38mm x 21.2mm labels, 65 labels per sheet - Box of 25 sheets |
Label | Q6559A | High quality self-adhesive labels - A4 size (21.0cm x 29.7cm) sheets, 70mm x 36mm labels, 24 labels per sheet - Box of 100 sheets |
Label | Q6558A | High quality self-adhesive labels - A4 size (21.0cm x 29.7cm) sheets, 70mm x 36mm labels, 24 labels per sheet - Box of 25 sheets |
Label | Q6557A | High quality self-adhesive labels - A4 size (21.0cm x 29.7cm) sheets, 70mm x 42.3mm labels, 21 labels per sheet - Box of 100 sheets |
Label | Q6555A | High quality self-adhesive labels - A4 size (21.0cm x 29.7cm) sheets, 97mm x 42.3mm labels, 12 labels per sheet - Box of 100 sheets |
Label | Q6554A | High quality self-adhesive labels - A4 size (21.0cm x 29.7cm) sheets, 97mm x 42.3mm labels, 12 labels per sheet - Box of 25 sheets |
Label | Q7902A | White address labels - 1 x 2-5/8 inches - 15 sheets |
Label | Q2593A | White address labels - 1.3cm (0.5in) x 4.4cm (1.7in) - 80 labels per sheet, 25 sheets per box |
Label | Q7901A | White address labels - 1/2 x 1-3/4 inches - 15 sheets |
Label | Q2590A | White address labels - 3.4cm (1.3in) x 10cm (4in) - 14 labels per sheet, 100 sheets per box |
Label | Q2589A | White address labels - 3.4cm (1.3in) x 10cm (4in) - 14 labels per sheet, 25 sheets per box |
Label | Q2592A | White address labels - 5cm (2in) x 10cm (4in) - 10 labels per sheet, 100 sheets per box |
Label | Q2591A | White address labels - 5cm (2in) x 10cm (4in) - 10 labels per sheet, 25 sheets per box |
Label | Q2594A | White address labels - 8.4cm (3.3in) x 10cm (4in) - 6 labels per sheet, 100 sheets per box |
Label | Q2551A | White full-sheet labels - A size (8.5 x 11-inches) - 100 sheets |
Label | Q2550A | White full-sheet labels - A size (8.5 x 11-inches) - 25 sheets |
Label | Q2588A | White labels - 2.5cm (1.0in) x 6.6cm (2.6in) - 30 labels per sheet, 100 sheets per box |
Label | Q2587A | White labels - 2.5cm (1.0in) x 6.6cm (2.6in) - 30 labels per sheet, 25 sheets per box |
Laser/Scanner | RG5-5591-000CN | Laser/scanner assembly - Mounts on top of print structure |
Laser/Scanner | RM1-1521-030CN | Laser/Scanner assembly - Mounts on top of print structure |
Lever | RC1-4123-020CN | Cartridge clamp lever - Attaches to upper left toner cartridge guide - Provides mechanical lock for toner cartridge |
Lever | RC1-4138-000CN | Cartridge lever - Link that pushes contact cam and protective plate when cartridge is inserted |
Lever | RC1-4115-000CN | Coupling lever - White plastic lever between large white gear cam and drive release assembly |
Lever | RC1-4116-000CN | Drive release lever |
Lever | RC1-4065-000CN | Grounding contact lever - Lever on left side that is moved by contact when the toner cartridge is installed |
Lever | RC1-4066-020CN | Grounding contact lever - Lever on left side that pushes both contact springs against toner cartridge contacts on left side of cartridge |
Lever | RC1-3939-000CN | Paper sensor lever - Mechanical device that activates photo sensor (PS902) - For tray 1 |
Lever | RB2-2836-000CN | Paper sensor lever - Mechanical device that engages photo sensor PS504 |
Lever | RC1-4132-000CN | Test switch lever - Mechanical link to test engine switch |
Link | RC1-4117-000CN | Drive release link - |
Link | RC1-4125-000CN | Laser shutter link - Enables the laser scanner shutter by pressing up this link on the underside of the laser/scanner assembly |
Maintenance Kit | H3980-60002 | Maintenance kit - For Laserjet 2400 series - Includes fusing roller for 220VAC, transfer roller, tray 1 pick-up roller, tray 2 separation pad and pick-up roller, gloves and installation instructions |
Maintenance Kit | H3980-60001 | Maintenance kit - LaserJet 2400 maintenance kit - Includes 120 VAC fusing roller, transfer roller, tray 1 pick-up roller, tray 2 separation pad and pick-up roller, and gloves |
Manual | C7058-90956 | LaserJet 2200 user guide (English) |
Manual | C7058-90958 | LaserJet 2200 user guide (French) |
Manual | C7058-90971 | LaserJet 2200 user guide (Spanish) |
Manual | Q5956-90940 | LaserJet 2400 series service manual - English |
Memory (DIMM) | Q7718A | 128MB, 100-pin, DDR DIMM |
Memory (DIMM) | Q7718-67951 | 128MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (DIMM) | Q7719-67951 | 256MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (DIMM) | Q7719A | 256MB, 100-pin, DDR DIMM |
Memory (DIMM) | Q2627A | 256MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (DIMM) | Q7713-67951 | 32MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (DIMM) | Q2625A | 64MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (DIMM) | Q7715-67951 | 64MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (Product) | Q3982A | 32MB DDR (Double Data Rate) 100-pin DIMM memory module |
Memory (Product) | Q7715A | HP 64MB 100-Pin DDR DIMM |
Memory Module | Q7725-67955 | LaserJet 2410/20/30 32MB flash memory module - Version 08.112.3 |
Motor | RK2-0523-000CN | Electric stepper motor - Fuser drive assembly motor - Motor M2 |
Motor | RL1-0587-000CN | Main motor - 26.2 watt DC motor on lower right side of printer - Motor M1 |
Motor | RH7-1461-000CN | Reverse motor - Provides power to turn paper over when it goes through duplexer |
Overlay | Q5956-00002 | Control panel overlay - Arabic |
Overlay | Q5956-00004 | Control panel overlay - Danish |
Overlay | Q5956-00001 | Control panel overlay - English |
Overlay | Q5956-60107 | Control panel overlay - French |
Overlay | Q5956-00009 | Control panel overlay - Greek |
Overlay | Q5956-00010 | Control panel overlay - Hebrew |
Overlay | Q5956-00013 | Control panel overlay - Korean |
Overlay | Q5956-60109 | Control panel overlay - Russian and Turkish |
Overlay | Q5956-00018 | Control panel overlay - Simplified Chinese |
Overlay | Q5956-00022 | Control panel overlay - Thailand |
Overlay | Q5956-00021 | Control panel overlay - Traditional Chinese |
Overlay | Q5956-00023 | Control panel overlay - Turkish |
Overlay | Q5956-60110 | Control panel overlay (Czechoslovakian, Polish and Hungarian) |
Overlay | Q5956-60106 | Control panel overlay (Dutch, Portuguese and Spanish) |
Overlay | Q5956-60108 | Control panel overlay (Finnish, Norwegian and Swedish) |
Pad | RB2-6474-000CN | 500-sheet separation pad - Small rectangular rubber pad on front of cassette arm - Not the one on metal lifting plate |
Pad | RF5-3272-000CN | Separation pad assembly - Separation pad, holder and spring |
Pad | RC1-0939-000CN | Tray 1 separation pad |
Paper | HPBC11 | HP Business Copy Paper - A size (8.5 x 11-inches) - 500 sheets |
Paper | HPL285R | HP Color LaserJet Paper - A size (8.5 x 11-inches) - 500 sheets |
Paper | HPJ1424 | HP LaserJet Paper - 21.6cm (8.5in) x 35.5cm (14in) - 500 sheets |
Paper | HPJ1124 | HP LaserJet Paper - A size (8.5 x 11-inches) - 500 sheets |
Paper | HPM115R | HP Multipurpose Paper - A size (8.5 x 11-inches) - 5 reams |
Paper | HPM1120 | HP Multipurpose Paper - A size (8.5 x 11-inches) - 500 sheets |
Paper | HPM113H | HP Multipurpose Paper - A size (8.5 x 11-inches), 3 hole - 500 sheets |
Paper | HPM1420 | HP Multipurpose Paper - Legal size (8.5 x 14 inches) - 500 sheets |
Paper | HPC8511 | HP Office Paper - A size (8.5 x 11-inches) - 10 reams |
Paper | HPC3HP | HP Office Paper - A size (8.5 x 11-inches) - 3 hole - 10 reams |
Paper | HPC8514 | HP Office Paper - Legal size (8.5 x 14 inches) - 10 reams |
Paper | HPE1120 | HP Office Recycled Paper - A size (8.5 x 11-inches) - 10 reams |
Paper | HPU1132 | HP Premium Choice LaserJet Paper - A size (8.5 x 11-inches) - 500 sheets |
Paper | HPU1732 | HP Premium Choice LaserJet Paper - Tabloid size (11 x 17-inches) - 250 sheets per package |
Paper | Q2414A | HP Premium Cover Paper - A4 size (21.0cm X 29.7cm) - 100 sheets (200 gsm) |
Paper | HPP1122 | HP Printing Paper - A size (8.5 x 11-inches) - 500 sheets |
Paper | Q1298A | LaserJet Satin Finish Tough Paper - A size (8.5 x 11-inches) - Will not tear and will withstand outdoor weather conditions - Can print on both sides |
Paper | Q2413A | Premium LaserJet Cover Paper - Heavyweight (75lb), smooth finish on both sides, 96 brightness - A size (8.5 x 11-inches) - 100 sheets per box |
Paper (Glossy) | Q2419A | High gloss LaserJet paper - High gloss finish on both sides, 95 brightness - A size (8.5 x 11-inches) - 200 sheets per box |
Paper (Glossy) | Q2421A | High gloss LaserJet paper - High gloss finish on both sides, 95 brightness - A4 size (21.0cm x 29.7cm) - 200 sheets per box |
Paper (Glossy) | Q2546A | HP Color Laser Glossy Presentation Paper - A size (8.5 x 11-inches) - 300 sheets |
Paper (Glossy) | Q6541A | HP Color Laser Soft-gloss Presentation Paper - A size (8.5 x 11-inches) - 200 sheets |
Paper (Glossy) | Q6542A | HP Professional Laser Soft-gloss Paper - A4 size (21.0cm x 29.7cm) - 200 sheets |
Paper (Glossy) | C4179B | Soft gloss color LaserJet paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package |
Paper (Glossy) | Q2415A | Soft gloss LaserJet paper - Soft gloss finish on both sides, 95 brightness - A size (8.5 x 11-inches) - 500 sheets per box |
Paper (Glossy) | Q2417A | Soft gloss LaserJet paper - Soft gloss finish on both sides, 95 brightness - A4 size (21.0cm x 29.7cm) - 250 sheets per box |
Paper (Matte) | Q6543A | HP Color Laser Matte Brochure Paper - A size (8.5 x 11-inches) - 150 sheets |
Paper (Matte) | Q6544A | HP Laser Matte Paper - A size (8.5 x 11-inches) - 150 sheets |
Paper (Satin) | Q1298B | HP LaserJet Tough Paper - A4 size (21.0cm x 29.7cm) |
PC Board | RM1-1524-090CN | Engine controller assembly - Engine controller PC board and metal pan - 220-240 VAC |
PC Board | RM1-1516-100CN | Engine controller assembly - For 110/127 VAC - Engine controller PC board and metal pan |
PC Board | C4209-69001 | Formatter (Main logic) board - For duplex capable printers - Formatter (Main Logic) Board |
PC Board | Q6507-61006 | Formatter (main logic) board - Use with network version |
PC Board | Q6508-61006 | Formatter (main logic) board - Use with Non-network version |
Pickup Assembly | RM1-1481-020CN | Paper pickup assembly - Tray 2 paper pickup assembly |
Pin | RB2-2943-000CN | Clutch pin - Holds drum drive clutch springs - Between pin holder and clutch spring plate |
Plate | RC1-3946-000CN | Front base plate - Metal plate that fits under fuser assembly |
Plate | RC1-4136-000CN | Protective plate |
Plate | RC1-4113-000CN | Right base plate - Metal plate under right side of printer |
Plate | RL1-0581-000CN | Transfer plate - Paper guide plate that mounts under transfer roller assembly |
Power Cord | 8120-6812 | Power cord (Flint Gray) - 18 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 120VAC in the United States, Canada, Mexico, Philippines, and Taiwan) |
Power Supply | RM1-1505-000CN | High voltage power supply board |
Reader | RM1-1422-000CN | Reader and cable - E-label reader contact mechanism - Connection to read data from toner catrtridge - Includes cable |
Receptacle | RG5-5565-000CN | Power receptacle - Power input receptacle and cable to power supply |
Retainer | RA0-1068-000CN | Continuity cap - Gear retainer for 30 tooth Tray 1 pickup roller shaft |
Roller | RB2-6374-000CN | Delivery roller - For upper delivery guide - Four used |
Roller | RC1-3996-000CN | Delivery roller - Small paper delivery rollers at top rear of printer - Four used |
Roller | RC1-3994-000CN | Face down roller - Small individual feed roller that rides against face down shaft roller - Held by torsion spring - Four used |
Roller | RB2-6318-000CN | Feed roller - Shaft with two rollers - Feeds paper from the duplexer into the registration assembly |
Roller | RB2-3046-000CN | Guide roller - Provides pressure against feed roller |
Roller | RL1-0542-000CN | Pickup roller - Tray 2 paper pickup roller |
Roller | RL1-0568-000CN | Tray 1/MP tray pickup roller - D-shaped replacement pickup roller |
Roller Assembly | RL1-0580-000CN | Face down output roller - Paper exit roller - Black plastic shaft with four rollers attached |
Roller Assembly | RB2-6304-000CN | Pickup roller assembly - Rubber roller on a short shaft with slots on the end - Does NOT include the two flanking hard plastic rollers - Tray 2 roller located near front middle of tray - Roller has slotted shaft |
Roller Assembly | RG5-5556-000CN | Registration assembly - Registration shutter and roller with holder frame assembly |
Roller Assembly | RM1-1502-020CN | Registration roller assembly - Two roller shafts with six rollers each and frame assembly |
Roller Assembly | RM1-1485-000CN | Roller assembly - Black plastic housing that holds rollers in front of tray 2 pickup roller assembly |
Roller Assembly | RM1-1508-000CN | Transfer roller assembly - Long metal shaft with black roller - Includes right side bushing and tension spring |
Roller Assembly | RM1-1484-000CN | Tray 1/MP Tray pickup roller shaft assembly - Includes roller shaft, bushings and pickup roller |
Screw | XA9-1503-000CN | M3 truss head (Flanged) phillips screw (Black oxide finish) - 6mm long |
Screw | XB4-7401-005CN | M4 pan-head phillips screw with self-tapping threads - 10mm long |
Screw | XB2-7300-605CN | Machine screw with attached washer - M3, 6mm - Used to hold plastic to metal |
Sensor | WG8-5645-000CN | Flag activated photo-sensor - Photo sensor - Paper sensor PS1305 |
Sensor | WG8-5624-000CN | Photo-sensor (TLP1241) - Sensor flag activated |
Sensor | RM1-1416-000CN | Registration sensor - Top of page photosensor PC board - PS901 |
Shaft | RB2-6274-000CN | Belt shaft 3 - Tiny idler shafts at back of narrow paper belts - Belt shaft 3 - Tiny idler shafts at back of narrow paper belts - Two used |
Shaft | RB2-6268-000CN | Idler shaf |
Solenoid | RH7-5270-000CN | Solenoid (SL1908) - Tray 2 pickup assembly - Solenoid - Tray 2 pickup assembly - SL1908 |
Solenoid | RH7-5273-000CN | Solenoid (SL2908) - Tray 1 pickup assembly - Solenoid - Tray 1 pickup assembly - SL2908 |
Solenoid | RK2-0526-000CN | Tray 1 paper pickup solenoid - Solenoid SL1 |
Solenoid | RK2-0528-000CN | Tray 2 paper pickup solenoid - Solenoid SL2 |
Spring | RU5-2405-000CN | Compression spring - Provides pressure for E-reader holder |
Spring | RU5-2401-000CN | Compression spring - Provides pressure for the large 201-tooth white gear on right side of printer |
Spring | RU5-2385-000CN | Compression spring - Provides pressure for tray 1 seperation pad |
Spring | RC1-4140-000CN | Compression spring - Provides pressure to grounding contact link on left side of cartridge guide - Pushes link arm away when cartridge is removed |
Spring | RB2-2978-000CN | Compression spring - Provides tension for upper delivery rollers mounted on upper delivery guide - 4 used |
Spring | RU5-2408-000CN | Compression spring - Right side transfer roller spring - Provides tension for transfer roller |
Spring | RU5-2404-000CN | Compression spring - Spring provides pressure to the laser shutter which when pulled back (spring is compressed) enables the laser scanner shutter by pressing up the plastic mechanical link on the underside of the laser/scanner assembly |
Spring | RC1-4185-000CN | Compression spring - Spring under transfer plate that provides electrical connection to transfer plate |
Spring | RC1-4067-000CN | Leaf spring - Leaf spring that provides electrical connection to left side of toner cartridge |
Spring | RU5-2406-000CN | Spring - Provides tension for power switch |
Spring | RU5-2407-000CN | Tension spring - Provides tension for cartridge access door arm |
Spring | RU5-2403-000CN | Tension spring - Provides tension for cartridge clamp lever that holds lefts side of cartridge in a stable position when inserted |
Spring | RU5-2388-000CN | Tension spring - Provides tension for white plastic arm on left side of cartridge access door |
Spring | RU5-2410-020CN | Torsion spring - Provides pressure to move protective plate back into cartridge compartment when the cartridge is removed |
Spring | RC1-3995-000CN | Torsion spring - Provides tension and holds small individual feed roller that rides against face down shaft roller - Four used |
Spring | RC1-4028-000CN | Torsion spring - Provides tension for top of page sensor flag |
Spring | RU5-2386-000CN | Torsion spring - Provides tension for tray 1 paper sensor flag |
Spring | RC1-4061-000CN | Torsion spring - Tiny spring that attaches to small metal U-shaped cartridge grounding contact - Front cartridge contact spring |
Spring | RC1-4059-000CN | Torsion spring - Tiny spring that attaches to small metal U-shaped cartridge grounding contact - Rear cartridge contact spring |
Static Dissipater | RC1-4025-000CN | Static charge eliminator - Comb that mounts above upper delivery roller that dissipates static charge as paper exits printer |
Switch | RK2-0534-000CN | Microswitch - Door open switch (SW501) |
Switch | RH7-6051-000CN | Microswitch with lever activator - Cartridge access door switch - SW1906 |
Switch | RC1-4173-000CN | Power switch - Located at lower right rear side of printer |
Switch | RC1-4170-000CN | Switch link - Mechanical link between power button and ECU board |
Tray Assembly | Q5963A | 500-sheet paper input tray assembly - For HP LaserJet 2400 Series - Holds Letter, A4, Legal, A5, B5, Executive and 8.5 x 13-inch paper sizes |
Tray Assembly | Q5963-67901 | 500-sheet paper input tray assembly - Optional Tray 3 - For HP Laserjet 2400 series printers - Holds Letter, A4, Legal, A5, B5, Executive and 8.5 x 13-inch paper sizes |
Tray Assembly | RM1-1523-000CN | MP/Tray 1 cover assembly - Includes drop down, pull out and flip out trays |
Tray Assembly | RM1-1490-000CN | MP/Tray 1 support assembly - Hinged support and adjustable paper width guide assembly - Tray 1 cover assembly attaches to this assembly |
Tray Assembly | RG5-5576-000CN | Multi-purpose paper input tray assembly (MP Tray, Tray one) |
Unknown Keyword | RB2-6400-000CN | Face-down delivery roller - Lower rollers |
Unknown Keyword | RB2-6249-000CN | Feed guide hinge |
Unknown Keyword | RG5-5598-000CN | Paper-feed cable - Includes the interface cable from the engine controller PC board to the accessory paper tray connector and the engine controller PC board ground cable. |
Washer | RB2-2949-000CN | Gear washer - Between largest drive gear and mounting plate |