| Keyword |
Part Number |
Description |
|---|
| Adapter | 390576-001 | Blade interface adapter - Class C, Cat5, Keyboard, Video, Mouse (KVM) |
| Adapter | 439874-001 | Blade interface adapter - Class C, Cat5, Keyboard, Video, Mouse (KVM) |
| Airflow Guide | 442952-001 | Airflow baffle - Plastic baffle with molded-in BBWC battery pack holders - Mounts between the processor heatsinks and the PCI fans (for 6-fan models) |
| Arm | 405668-001 | Cable management arm with 30W power adapter |
| Battery | 398648-001 | Battery module with integrated charger - Ni-MH, 4.8V, 5000mAh - For use with the Smart Array P400 and P800 SAS controller boards with battery backed write cache (BBWC) |
| Bezel | 407745-001 | Front bezel (faceplate) - Has cut-outs for the hard drive bay, media drive bay, System Insight Display (SID), VGA connector and USB connectors |
| Cabinet | 260289-001 | Compaq Rack 10642 cabinet (Graphite Black) - 42U height, 2.0m (6.6ft) tall, 600mm (2.0ft) wide - Shipped on a standard pallet - Includes cabinet with top cover, doors, casters, cable management D-rings, and clamps for D-rings |
| Cable | 389955-001 | External SAS cable (8470) - Includes four lanes, 2.0m (6.65ft) long |
| Cable | 397641-001 | Hardware and cable kit - For 1X2 Server Console Switch and CAT5 Server Console Switch KVM - Includes 1.8m (6ft) long serial cable with 9-pin (M) and 9-pin (F) connectors, screws, nuts, and Velcro strips |
| Cable | 408796-001 | SAS cable assembly - Straight connector to right angle connector, 559mm (22 inches) long |
| Cable | 409124-001 | Smart Array P400 controller battery cable assembly - 28AWG, 16-pin - 292mm (11.5 inches) long - Connects between the battery pack and the memory module |
| Cable (Interface) | 414619-001 | HP PS/2 virtual media interface adapter - KVM / USB external extender |
| Cable Kit | 408797-001 | Data cable kit - Includes the fan board to system I/O board cable and the media drve bay to system I/O board cable |
| Cable Kit | 408795-001 | Miscellaneous cable kit - Includes 10-pin power cable and System Insight Display (SID) cable |
| Cage | 442954-001 | PCI fan cage assembly - Holds two fans - Mounts on the system I/O board in the right front of the server (for 6-fan models) |
| Cage | 412200-001 | PCIe riser board cage assembly - Includes PCIe x8 slot low profile riser board on one side and PCIe x8 full length and full height slot riser board on the other |
| Cage | 408785-001 | Power supply cage assembly - Includes the two 'common slot' power supply bays - Does NOT include the power supply backplane board - Mounts in the left rear of the chassis |
| Cage | 442953-001 | Processor fan cage - Holds four fans - Includes the top latch handle - Mounts on the fan bracket plate in the left front of the server (for 6-fan models) |
| Chassis | 122231-001 | Chassis |
| Controller | 512730-001 | 10-port controller assembly - 4GB cache |
| Controller | 412206-001 | Smart Array P400i controller board - PCIe x8 SAS controller - Has two internal x4 mini-SAS ports - For up to 3Gb/sec transfer rate SAS and up to 1.5Gb/sec transfer rate SATA - Does not include memory or backup power |
| Controller | 398647-001 | Smart Array P800 controller board - PCIe x8 SAS controller - Has two internal x4 SAS ports, two external x4 SAS ports, memory connector and three battery slots - For up to 3Gb/sec SAS and 1.5Gb/sec SATA transfer rate - Does not include memory or batteries |
| Cover | 392613-001 | Hard drive blank (cover) - To fill empty 2.5-inch small form factor (SFF) drive bay slots |
| Display | 408792-001 | Systems Insight Display (SID) assembly - Includes the display assembly and cover |
| Drive | 453138-001 | 146GB hot-plug single-port SAS hard disk drive - 10,000 RPM, 3Gb/sec transfer rate, 2.5-inch small form factor (SFF) |
| Drive | 384070-001 | IDE DVD+R/RW Slimline optical drive (Carbon Black) - 8X speed, 68-pin connector, 12.7mm (0.5 inch) height - Mounts in the multi-media drive bay |
| Drive | 399402-001 | IDE DVD+R/RW Slimline optical drive (Carbon Black) - 8X speed, 68-pin connector, 12.7mm (0.5 inch) height - Mounts in the multi-media drive bay |
| Ejector | 371114-001 | CD-ROM ejector rod assembly - Ejects the drive from the drive bay - Mounts next to the CD-ROM drive bay |
| Fan | 407747-001 | Hot-plug fan assembly - 60mm x 60mm x 38mm (2.36 inches x 2.36 inches x 1.50 inches) - Includes the retaining latch |
| Fan | 412212-001 | System fan module assembly - Includes fan housing with three dual fan assemblies (three modules are used in the server) |
| Grommet | 430370-001 | Rubber isolation grommet kit - Includes 10 rubber grommets and two washers |
| Hardware | 184600-001 | Miscellaneous Hardware Kit |
| Hardware Kit | 228527-001 | Hardware Kit - Includes four T-15 flathead screws and three expansion slot covers |
| Hardware Kit | 407752-001 | Hardware kit - Includes retainer spring, assorted screws, expansion slot cover, thumbscrew cap, right-attach thumbscrew assembly, and left-attach thumbscrew assembly |
| Heat Sink | 408790-001 | Latch type heatsink assembly - Latches to the top of the processor with the heatsink retaining bracket - Includes thermal grease and an alcohol pad |
| Heat Sink | 412210-001 | Latch type heatsink assembly - Latches to the top of the processor with the heatsink retaining latches - Includes thermal grease and alcohol cleaning pad |
| Keyboard | 416233-001 | HP 1U rackmount keyboard assembly - includes mounting rails, screws, cables, and cable management arm |
| Memory (DIMM) | 416471-001 | 1GB, 667MHz, PC2-5300F-5, DDR2, dual-rank x8, 1.50V, registered, fully-buffered with ECC, dual in-line memory module (FBDIMM) - Part number is for one 1GB DIMM |
| Memory (DIMM) | 416472-001 | 2GB, 667MHz, PC2-5300F-5, DDR2, dual-rank x4, 1.50V, registered, fully-buffered with ECC, dual in-line memory module (FBDIMM) - Part number is for one 2GB DIMM |
| Memory Module | 405836-001 | 256MB battery backed write cache (BBWC) memory module - Does not include the controller board or battery - For use with the P400 Smart Array controller |
| Monitor | 406498-001 | Monitor and keyboard - Includes a 17-inch WXGA+ monitor (1600 x 900 max resolution) and keyboard with touch pad - 1U form factor (United States) |
| Monitor | 407445-D71 | Power Distribution Unit (PDU) power monitoring - Single, 3-phase, 24A (North America and Japan) |
| Monitor | 397807-D71 | Power Distribution Unit (PDU) power monitoring - 1-phase, 24A (North America (NA), Japan) |
| Pallet | 385976-001 | Shock pallet (10000 G2) - 0.6mm (23.6in) - Includes ramp, corner pads, and clips |
| Panel | 407744-001 | Access panel - Top cover for the server |
| Panel | 385972-001 | Side panel assembly - For 10636 rack (10000 G2) - Includes lower and middle sections |
| Panel | 122214-001 | Top access panel |
| PC Board | 407751-001 | Backplane board - For the 8-bay small form factor (SFF) hard drive cage |
| PC Board | 442955-001 | Fan backplane board - Has connectors for eight fan modules (only four are used), dual USB connector, VGA connector, and status LEDs - Mounts to the processor fan bracket plate |
| PC Board | 408791-001 | Fan backplane board - Has connectors for eight fan modules, dual USB connector, VGA connector, and status LEDs - Mounts to the processor fan bracket plate |
| PC Board | 412201-001 | Hard drive backplane board assembly - Includes the 6-bay small form factor (SFF) hard drive backplane board and the backplane power cable |
| PC Board | 412202-001 | Multi-media backplane board assembly - Mounts to the rear of the multi-media drive bay - Includes the the multi-media board in a mounting frame and the multi-media drive cable |
| PC Board | 407750-001 | Power supply backplane board assembly - Interconnects the power supply bays with the system I/O board - Upright board at the left rear of the server |
| PC Board | 407749-001 | System I/O board (motherboard) - Supports Intel Xeon 50xx and 51xx Dual-Core processors ONLY - Includes heatsink cage and system battery |
| PC Board | 412199-001 | System I/O board (motherboard) assembly - For use with Intel Xeon 50xx and 51xx series processors only |
| PC Board (Interface) | 436431-001 | NC364T quad port Gigabit Ethernet adapter board - Has four external RJ45 10/100/1000Mb ports - Requires one low profile (or full height) x4 PCIe slot |
| PDU | 376356-D71 | HP Power Distribution Unit (PDU) - With power monitoring, single, 3-phase, 24A (North America, Japan) |
| PDU | 417588-B31 | Power distribution unit (PDU) - 200-240VAC, 40A - Has attached power cord with IEC 309 (M) 60A plug and four C19 (F) receptacles |
| Plastics Kit | 407753-001 | Plastics kit - Includes low-profile PCI retainer, hard drive backplane retainer, PCI card guide retainer, Torx tool retainer, and power cord retainer clip |
| Plastics Kit | 412208-001 | Plastics kit - Includes optical drive ejector assembly, front bezel, optical drive blank, expansion slot covers, screws, power supply and processor air baffles, E200i and P400i controller battery trays, SFF hard drive blank, and power supply blank |
| Plastics Kit | 228516-001 | Plastics Kit - Includes PCI slot release lever, PCI shipping bracket, rear PCI lightpipe, PCI lightpipe cover, PCI riser cage door latch, and PCI slot 1 thumbscrew with molded cap |
| Plastics Kit | 230979-001 | Plastics kit - Includes tower model feet, receptacle, door snap, retainer, card guide, PCI, fasteners, 0.15-inch and 0.202-inch plastic standoffs, clip, cable, adhesive, 1.77-inch, clip, retainer, 0.125-inch diameter, and assembly, PCI latch and base |
| Power Cord | 142258-002 | AC power distribution unit (PDU) power cord (Black) - 250VAC, 16AWG, 2.5m (8.2ft) long - Includes IEC-320 C14 (M) connector to IEC 320 C13 (F) connector |
| Power Cord | 192514-001 | Power cord and adapter cable - 250V, 2.5A - 3.7m (12ft) long - Has a 3-pin C14 (male) connector for power input and a 3-pin C5 (female) connector for output |
| Power Module | 407748-001 | Processor power module (PPM) - Voltage regulator module (VRM) for the processor - Plugs in the socket next to the processor |
| Power Supply | 403781-001 | 1000 watt AC hot-plug power supply - Installs in the computer chassis as primary or redundant supply (800 watts at 100VAC to 1000 watts at 200VAC maximum power) - Requires 100-240VAC at 50/60Hz |
| Processor | 416799-001 | Intel Xeon 5160 Dual-Core 64-bit processor - 3.00GHz (Woodcrest, 4MB Level-2 cache, 1333MHz front side bus, 80 watt thermal design power (TDP), socket LGA771) - Includes thermal grease and alcohol pad |
| Rack Mount Kit | 231771-001 | Rack Mount kit - For Rack 9000 series and Rack 10000 series - Used to install one Sun Enterprise 2 Web Server, Sun Enterprise Ultra 5S Server, or Sun Enterprise Ultra 10S Workgroup Server |
| Rack Mount Kit | 360104-001 | Rack mount kit - Includes inner and outer rail assembly, and left and right slide assembly for standard rack rail |
| Rack Mount Kit | 359254-001 | Rack mounting hardware kit for 2U high servers - Includes left and right side slide assemblies and cable management arm |
| Rack Mount Kit | 405667-001 | Rack mounting rail kit |
| Shipping Material/Carton | 174795-001 | Rack return kit |
| Shipping Material/Carton | 333783-001 | Return kit |
| Switch | 396630-001 | 1x8-port CAT5 Server Console Switch KVM - Uses Category 5 (CAT5) cable - Does not use LAN connections - Directly supports one console and up to eight computers (expandable to 64) |
| Switch | 410529-001 | Server console switch for KVM - 0x2x16, USB |
| Switch | 460430-001 | Sticker - 4XC-13, acttached cable |
| Tool | 413965-001 | Torx tool - L-shaped wrench with T-15 and T-10 ends |