Keyword |
Part Number |
Description |
Arm | RC2-6824-000CN | Intermediate transfer belt (ITB) coupling release arm |
Arm | RC2-7035-000CN | Waste toner left arm |
Arm | RC2-7036-000CN | Waste toner right arm |
Belt | CC522-67911 | Intermediate transfer belt (ITB) repair assembly - Includes Intermediate transfer belt (ITB) and secondary transfer roller |
Belt | CE710-67903 | Intermediate transfer belt assembly - Included in the service and includes transfer roller |
Cable | RM1-6849-000CN | Cable - Conects the interconnect board (ICB) PCA to the control panel |
Cable | RM1-3651-000CN | Door open switch cable - Used for the 3 x 500-sheet paper feeder tray |
Cable | RM1-6991-000CN | Engine interface cable - Used for the 3 x 500-sheet feeder tray assembly |
Cable | RM1-6846-000CN | Feed joint cable - Used for duplex models only |
Cable | RM1-6804-000CN | Flat flexible cable assembly |
Cable | RM1-6833-000CN | High-voltage power supply to low-voltage power supply left cable |
Cable | RM1-6807-000CN | Low voltage power supply cable |
Cable | RM1-6811-000CN | Low-voltage AC joint cable |
Cable | RM1-6867-000CN | Low-voltage power supply SB joint cable - Used for duplex models only |
Cable | RM1-6813-000CN | Low-voltage power supply test cable |
Cable | RM1-3647-000CN | Multi-sensor cable - Used for the 3 x 500-sheet paper feeder tray |
Cable | RM1-6992-000CN | PCA joint cable - Used for the 3 x 500-sheet feeder tray assembly |
Cable | RM1-6822-000CN | Primary transfer cable |
Cable | RM1-6863-000CN | Rear cable - Connects the laser scanner with the DC controller board |
Cable | RM1-6830-000CN | Switch cable |
Cable | RK2-2901-000CN | USB cable - Internal cable that connects the USB port to the formatter |
Cap | RC2-6691-000CN | T2 contact - For the second-transfer high-voltage PCA cap |
Cartridge | CE270-67901 | Black print cartridge - Prints approximately 12,000 standard pages |
Cartridge | CE271-67901 | Cyan print cartridge - Prints approximately 11,000 standard pages |
Cartridge | CE273-67901 | Magenta print cartridge - Prints approximately 11,000 standard pages |
Cartridge | CE272-67901 | Yellow print cartridge - Prints approximately 11,000 standard pages |
Case | RM1-6065-000CN | Formatter board metal case |
Clamp | RC2-6663-000CN | Edge clamp |
Clamp | RC2-6674-000CN | Edge D clamp |
Connector | VS1-7514-008CN | 8-pin paper pick-up connector |
Connector | VS1-7207-019CN | Snap tight black connector |
Core | WE8-6639-000CN | Ring core |
Cover | RC2-9320-000CN | 500-sheet paper feeder front right cover |
Cover | RM1-6949-000CN | 500-sheet paper feeder front upper cover assembly |
Cover | RC2-9331-000CN | 500-sheet paper feeder left cover |
Cover | RC2-9332-000CN | 500-sheet paper feeder lower handle cover |
Cover | RC2-9330-000CN | 500-sheet paper feeder rear cover |
Cover | RM1-6948-000CN | 500-sheet paper feeder right lower cover assembly |
Cover | RC2-6760-000CN | Cross-member left cover |
Cover | RC2-6931-000CN | Duplexing gear cover - Used for duplex models only |
Cover | RC2-6732-000CN | Front arm cover 1 |
Cover | RC2-6733-000CN | Front arm cover 2 |
Cover | RC2-6738-000CN | Front center hinge cover |
Cover | RM1-7133-000CN | Front cover assembly - Plastic cover that protects the front part of the printer |
Cover | CE707-67902 | Front cover assembly - Plastic cover that protects the front side of the printer |
Cover | RC2-6713-000CN | Front left hinge cover |
Cover | RM1-6958-000CN | Front lower cover assembly - Used for the 3 x 500-sheet paper feeder tray assembly |
Cover | RC2-6715-000CN | Front right hinge cover |
Cover | RC2-6627-000CN | Front right lower handle cover |
Cover | RC3-0688-000CN | Gear cover - Plastic cover that protects the 18/29-tooth gear - For the simplex models only |
Cover | RC2-7204-000CN | Guide cover - Cover the arm front guide |
Cover | RC2-6670-000CN | Handle guide cover |
Cover | RC2-6573-000CN | Imaging HVT cable cover |
Cover | RC2-6737-000CN | Internal lower front cover |
Cover | RC2-9349-000CN | Left cover - For the 3 x 500-sheet paper feeder |
Cover | RM1-7143-000CN | Left cover assembly - Plastic cover that protect the left side of the printer |
Cover | RC2-9350-000CN | Left lower cover - For the 3 x 500-sheet paper feeder tray |
Cover | RC2-6642-000CN | Lower connector cover |
Cover | RC2-6625-000CN | Lower left handle cover |
Cover | RC2-9357-000CN | Lower rear cover - For the 3 x 500-sheet paper feeder |
Cover | RC2-6650-000CN | Main cross-member cable cover |
Cover | RC2-6574-000CN | Main drive cable lower cover |
Cover | RC2-6832-000CN | Protective cable cover |
Cover | RC2-9348-000CN | Rear cover - For the 3 x 500-sheet paper feeder |
Cover | RM1-7147-000CN | Rear cover assembly - Plastic cover that protects the rear side of the printer |
Cover | RC2-6626-000CN | Rear right lower handle cover |
Cover | RC2-9343-000CN | Right corner cover - For the 3 x 500-sheet paper feeder |
Cover | RM1-7144-000CN | Right front cover assembly - Includes control panel |
Cover | RC2-9346-000CN | Right lower cover - For the 3 x 500-sheet paper feeder |
Cover | RC2-9347-000CN | Right lower cover - For the 3 x 500-sheet paper feeder |
Cover | RC2-8424-000CN | Right rear cable cover |
Cover | RM1-7142-000CN | Right rear cover - Rectangular shaped plastic cover that protects the right rear side of the printer |
Cover | RM1-7148-000CN | Top cover assembly - Plastic cover that protects the top part of the printer - Holds paper after it has been printed |
Cover | RC2-6962-000CN | Waste toner cover |
Cover | RC2-6963-000CN | Waste toner cover |
Cover | RM1-6012-000CN | Waste toner cover assembly |
Delivery | RM1-6165-000CN | Paper delivery assembly |
Delivery | RM1-6165-080CN | Paper delivery assembly |
Door | RM1-6946-000CN | 500-sheet paper feeder right door assembly |
Door | CE707-67909 | Inner door assembly - Door that give access to the cartridge area |
Door | RM1-6007-000CN | Right door assembly - For used with duplex models only |
Door | RM1-6138-000CN | Right door assembly - For used with simplex models only |
Door | RM1-6953-000CN | Right door assembly - Used for the 3 x 500-sheet paper feeder tray assembly |
Door | RC2-7034-000CN | Toner collection unit access door |
Door | RC2-7091-000CN | Upper right door |
Drive | CE709-67901 | 120GB encrypted hard disk drive - Includes right and Left rail, disk drive cradle, and power/data cable assembly |
Drive | CE707-67901 | 8GB drive solid state kit - Include driver retainer |
Drive Assembly | RM1-6005-000CN | Duplex reverse drive assembly - Used for duplex models only |
Drive Assembly | RM1-6120-000CN | Duplex reverse drive assembly - Used for simplex models only |
Drive Assembly | CE707-67904 | Fusing drive assembly - Includes motor (M4) and the fuser gear assembly |
Drive Assembly | CE708-67901 | Main drive assembly - Used for duplex models only |
Drive Assembly | CE707-67905 | Main drive assembly - Used for simplex models only |
Duct | RC2-8388-000CN | Fan duct - Diverts air to the power supply fan (FM1) area |
Duct | RC2-7300-000CN | Front duct - Mounts next to the upper cartridge guide |
Duct | RC2-8360-000CN | Joint duct - Mounts on the right door area |
Fan | RK2-2276-000CN | Cooling fan (FM1) - Provides air to the right side of the printer |
Fan | RK2-3301-000CN | Formatter cooling fan (FM3) - Provides air and cools the formatter area |
Fan | RK2-2728-000CN | Fuser fan (FM2) - Provides air to the fuser area |
Feed Assembly | RM1-6040-000CN | Toner feed assembly |
Frame | RC2-7196-000CN | Front support frame - For the registration sensor assembly |
Frame | RC2-7197-000CN | Rear support frame - For the registration sensor assembly |
Fusing Assembly | RM1-6180-000CN | Fusing Assembly - For 110VAC - Bonds toner to paper with heat |
Fusing Assembly | RM1-6181-000CN | Fusing Assembly - For 220 VAC - Bonds toner to paper with heat |
Gear | RU6-0775-000CN | 18/29-tooth gear - For simplex models only |
Gear | RU6-0771-000CN | 25-tooth gear - For the duplex models only |
Gear | RU6-0772-000CN | 25-tooth gear - For the duplex models only |
Gear | RU6-0773-000CN | 74-tooth gear - For the duplex models only |
Gear | RU6-0795-000CN | Link worm gear |
Gear Assembly | RM1-7914-060CN | Fusing gear assembly |
Guide | RC3-0684-000CN | Cable guide - Guides left high voltage power supply to the low voltage power supply cable |
Guide | RC2-6842-000CN | Cable right guide |
Guide | RC2-6841-000CN | Cable upper guide |
Guide | RC2-6587-000CN | Cross-member cable front guide |
Guide | RC2-6588-000CN | Cross-member cable rear guide |
Guide | RC2-6665-000CN | DC controller support cable guide |
Guide | RC2-6632-000CN | Front arm guide |
Guide | RC2-6693-000CN | Fusing AC cable guide |
Guide | RC2-6546-000CN | Fusing front guide |
Guide | RC2-6547-000CN | Fusing rear guide |
Guide | RC2-6661-000CN | Imaging high voltage transceiver (HVT) cable guide |
Guide | RC2-6589-000CN | Inside cable guide |
Guide | RC2-6628-000CN | Laser scanner assembly guide |
Guide | RC2-6662-000CN | Low voltage transceiver (LVT) cable guide |
Guide | RC2-6600-000CN | Main cross-member cable guide |
Guide | RC2-6659-000CN | Main drive cable guide |
Guide | RC2-7297-000CN | Paper feed guide assembly |
Guide | RC2-7203-000CN | Slide guide |
Guide | RM1-5990-000CN | Upper cartridge guide assembly |
Hardware | RM1-6036-000CN | Auto-close assembly |
Hinge | RC2-7094-000CN | Front right door hinge |
Hinge | RC2-6716-000CN | Inner door left hinge |
Hinge | RC2-6712-000CN | Inner door right hinge |
Holder | RC2-8357-000CN | Duplexing fan holder - Holds fusing fan (FM2) |
Holder | RC2-6648-000CN | Fan holder - Holds formatter fan (FM3) |
Holder | RC2-6680-000CN | First power dispatching holder |
Holder | RC2-6655-000CN | Flat flexible cable holder |
Holder | RC2-6689-000CN | Interlock switch holder - Holds 24V interlock switch (SW2) |
Holder | RC2-6638-000CN | Paper pick-up connector holder |
Holder | RC2-7299-000CN | Power supply fan holder - Holds fan (FM1) |
Holder | RC2-6645-000CN | Right holder - Holds the door sensor (PS15) |
Holder | RC2-6681-010CN | Secondary transfer high voltage transceiver (HVT) holder |
Holder | RC2-6682-000CN | Secondary transfer power dispatching holder |
Holder | RC2-6666-000CN | Switch holder - Holds the power switch PCA |
Hook | RC2-6932-000CN | Duplexing spring hook - For duplex models only |
Label | RC2-9363-000CN | Cassette number label |
Label | RU6-8042-000CN | Fusing insert label - Mounts on the rear fuser guide |
Label | RU5-8806-000CN | Intermediate transfer belt insert FH label |
Label | RU5-8804-000CN | Intermediate transfer belt insert FV label |
Label | RU5-8807-000CN | Intermediate transfer belt set RH label |
Label | RU5-8805-000CN | Intermediate transfer belt set RV label |
Label | RC3-1824-000CN | Label - For the 3 x 500-sheet paper cassette feeder tray (number) |
Laser/Scanner | RM1-6122-070CN | Laser scanner assembly |
Lever | RC2-6744-000CN | Inner door pressure lever |
Lever | RC2-7200-000CN | Lift lever - Mounts on the arm front guide |
Lever | RC2-7199-000CN | Lift lever - Mounts on the slide guide |
Lever | RC2-7198-000CN | Push lever - Mounts on the front arm guide |
Lifter | RM1-6039-000CN | Lifter drive assembly |
Lifter | RM1-3819-000CN | Lifter drive assembly - Provides lift support for high capacity input paper tray |
Lifter | RM1-6043-000CN | Multi-porpuse/tray 1 lifter plate assembly |
Link | RC2-9327-000CN | 500-sheet paper feeder right door lower link |
Link | RC2-9335-000CN | 500-sheet paper feeder right door upper link |
Link | RC2-6823-000CN | Intermediate transfer belt (ITB) coupling release link |
Link | RC2-7236-000CN | Rear right door link |
Lock | RC2-9303-000CN | 500-sheet paper feeder rear handle lock |
Lock | RC2-7234-000CN | Right door link lock |
Lock | RC2-7018-000CN | Toner support guide lock |
Maintenance Kit | CE979-67901 | Intermediate transfer belt (ITB) maintenance kit - Includes Secondary transfer roller assembly, tray 1 pick-up roller, tray 2 pick-up roller assembly and separation roller, tray 3, 4, 5,6 pick-up rollers, and tray 3, 4, 5, 6 feed roller assembly |
Motor | RM1-6088-000CN | DC motor assembly - Includes motors (M1, M2, M3) |
Motor | RK2-3298-000CN | Developing disengagement stepping DC motor (M6) - Engages and disengages the developing unit - Used for the duplex models only |
Motor | RM1-6074-000CN | Fussing motor (M4) assembly - Drives the fuser pressure and delivery rollers, pressurizes and depressurizes the pressure roller, and engages and disengages the primary transfer roller |
Motor | RK2-1331-000CN | Stepping motor (M1) - Main drive motor for the printer |
Mount | RC2-6735-000CN | Front arm cover mount |
Mount | RC2-6743-000CN | Inner door rail mount - Mounts on the front cover assembly |
Mount | RC2-6717-000CN | Inner door toggle mount |
Mount | RC2-6745-000CN | Stopper arm mount |
Pad | CE707-67908 | Separation pad assembly - For tray 1 |
Pad | CE710-67006 | Tray 1 paper separation pad |
PC Board | CE708-67902 | DC controller PC board assembly - Used for duplex model only |
PC Board | CE707-67906 | DC controller PC board assembly - Used for simplex model only |
PC Board | RM1-6783-000CN | Driver PC board - For simplex models only |
PC Board | RM1-6742-000CN | Driver PCA - For used with duplex models only |
PC Board | RK2-2884-000CN | Environment sensor PC board assembly |
PC Board | RM1-6989-000CN | Feeder PC board - Used for the 3 x 500-sheet paper feeder tray assembly |
PC Board | CE707-69001 | Formatter PC board assembly |
PC Board | RM1-6800-000CN | Imaging high-voltage PC board assembly |
PC Board | CE707-67907 | Interconnect board (ICB) PCA |
PC Board | RM1-6987-000CN | Paper feeder driver PC board assembly |
PC Board | RM1-6759-000CN | Power switch PCA assembly |
PC Board | RM1-7004-000CN | Primary transfer high-voltage PC board |
PC Board | RM1-6802-000CN | Secondary transfer high-voltage PC board assembly |
PC Board | RM1-6779-000CN | Toner remaining detection PC board assembly |
Pickup Assembly | RM1-6944-000CN | Paper pick-up assembly - For trays 3,4, and 5 |
Plate | RC2-9649-000CN | Arm reinforcement plate |
Plate | RC2-6673-000CN | Box pillar plate |
Plate | RL1-2266-000CN | Duplexing drive gear plate |
Plate | RC2-7272-000CN | Front right door link plate |
Plate | RL1-2281-000CN | Front right door link plate |
Plate | RC2-9687-000CN | Protective flat flexible cable plate |
Plate | RC2-7273-000CN | Rear right door link plate |
Plate | RL1-2282-000CN | Rear right door link plate |
Power Supply | RM1-6753-000CN | Low voltage power supply assembly - For 110VAC |
Power Supply | RM1-6754-000CN | Low voltage power supply assembly - For 220VAC |
Rail | RC2-6724-000CN | Cartridge auxiliary rail |
Rail | RC2-7185-000CN | Intermediate transfer belt (ITB) guide rail |
Rail | RC2-7193-000CN | Intermediate transfer belt (ITB) guide rail |
Rail | RM1-6037-000CN | Intermediate transfer belt (ITB) guide rail (R1) assembly |
Rail | RM1-6018-000CN | Intermediate transfer belt (ITB) guide rail assembly |
Rail | RM1-6019-000CN | Intermediate transfer belt (ITB) guide rail assembly |
Rail | RC2-6634-000CN | Lower right door link rail |
Rail | RC2-6635-000CN | Rear lower door link rail |
Rod | RC2-6611-000CN | Spring rod |
Roller | CE707-67903 | Paper pick-up roller assembly - Picks up media from the paper input tray |
Roller | CE710-67008 | Pick-up/paper feeder roller - For tray 3, 4, 5, or 6 |
Roller | CE710-67908 | Pick-up/paper feeder roller - For tray 3, 4, 5, or 6 |
Roller | CE710-67007 | Separation roller assembly - Used for tray 2 |
Sealant | RC3-1013-000CN | Slide seal sheet |
Sealant | RC3-1014-000CN | Slide shutter seal |
Sensor | RM1-6164-000CN | Last paper presence sensor - Advice that there is just on sheet of paper left at the paper tray cassette |
Sensor | WG8-5696-000CN | Photo-interrupter sensor assembly (Does not include the sensor flag) |
Sensor | RM1-7922-000CN | Registration sensor assembly |
Shaft | RU5-4979-000CN | Right door link lock |
Shutter | RC2-7010-000CN | Exhaust shutter - Mounts on the toner feed assembly |
Slide | RC2-7201-000CN | Push slider - Mounts on the slide guide |
Spacer | VT2-5176-004CN | DC controller PCA spacer |
Spring | RU6-2721-000CN | Compression spring |
Spring | RU6-2683-000CN | Compression spring - Provides compression to the exhaust shutter |
Spring | RU6-2771-000CN | Contact spring - For second-transfer high-voltage PCA |
Spring | RU6-2767-000CN | Contact spring - Mounts on the first power dispatching holder |
Spring | RU6-2768-000CN | Contact spring - Mounts on the first power dispatching holder |
Spring | RC2-7209-000CN | Grounding spring |
Spring | RC2-6700-000CN | Grounding spring - For the second-transfer high-voltage PCA |
Spring | RU6-2772-000CN | Grounding spring - For the second-transfer high-voltage PCA |
Spring | RC2-7092-000CN | Leaf grounding spring |
Spring | RU6-2671-000CN | Tension spring - Mounts on the duplexing drive gear plate |
Spring | RU6-2727-000CN | Tension spring - Provides tension to the front right door link plate |
Spring | RU6-2744-000CN | Tension spring - Provides tension to the rear right door link plate |
Spring | RU6-2710-000CN | Tension spring - Provides tension to the registration sensor assembly |
Spring | RU6-2831-000CN | Tension spring - Provides tension to the waste toner right arm |
Stop | RC2-6719-000CN | Inner door stopper 1 |
Stop | RC2-6736-000CN | Inner door stopper 2 |
Stop | RC2-6646-000CN | Laser scanner stopper |
Support | RC2-6811-000CN | Developing coupling support |
Switch | WC2-5512-000CN | Door open detection switch (SW103) |
Switch | WC4-5251-000CN | Microswitch (SW2) |
Toner | CE980-67901 | Toner collection unit kit - Includes waste toner box assembly, and toner cleaning cloth |
Tray | RM1-6942-000CN | 500-sheet paper cassette tray assembly - Pull out cassette where the paper is loaded into - Can be used as tray 3, 4 , 5 or 6 |
Tray | CE710-67906 | Tray 2 cassette assembly |
Tray Assembly | CE860-67901 | 1 x 500-sheet paper tray assembly - Used as tray 3 |
Tray Assembly | CE725-67901 | 3 x 500-sheet paper tray assembly - Used for trays 4, 5, and 6 with stand |
Tray Assembly | RM1-6045-000CN | Multi-purpose/tray 1 assembly |