Keyword |
Part Number |
Description |
Adapter | 656091-001 | FlexibleLOM InfiniBand QDR/Ethernet 10Gb dual port 544FLR adapter - Has two Quad Small Form-factor Pluggable Plus (QSFP) ports |
Airflow Guide | 632801-001 | Plastic air blocker - For DIMM modules |
Bracket | 252641-001 | Power distribution unit (PDU) bracket assembly - Includes module retention bracket, single and double check brackets, and 1U form factor mamangement core left and right brackets |
Bracket | 463935-001 | Power Distribution Unit (PDU) mounting bracket kit - 1U form factor high |
Cable | 622068-001 | Cable for remote console management enablement connectivity |
Cable | 669746-001 | Cable for SAS hard drive disk backplane |
Cable | 680665-001 | Controller cable - With U-type connector, 2U form factor |
Cable | 590633-001 | DB9 null module cable - 2.5m (8.2ft) long |
Cable | 707776-001 | Graphics Processing Unit (GPU) power cable - For use with SL250 |
Cable | 708915-001 | Graphics Processing Unit (GPU) power cable assembly - 25cm (9.84in) long |
Cable | 695003-001 | Internal USB cable - 33.4in (850mm) long |
Cable | 669749-001 | Left Peripheral Component Interconnect (PCI) power cable |
Cable | 669747-001 | Left power cable for hard drive backplane |
Cable | 708916-001 | Power capping cable - Graphics Processing Unit (GPU), 39cm (15.35in) long |
Cable | 671912-001 | Rear Graphics Processing Unit (GPU) power cable - For 2U form factor, right node use, x32 |
Cable | 693516-001 | Redundant power system (RPS) cable - 1U form factor, LT 4N6W7-01 |
Cable | 693517-001 | Redundant power system (RPS) cable assembly - 1U form factor, RT 4N6W8-0 |
Cable | 669748-001 | Right power cable for hard drive backplane |
Cable | 332774-B21 | RJ45 cable - 17.78cm (7in) long |
Cable | 669284-001 | System board power cable |
Cable Kit | 600670-001 | Cable kit - Includes power, LED, Remote Configuration Module (RCM) cables |
Cable Kit | 576896-001 | Cable kit - Unit Identification (UID) LED, 2U form factor, G6 to RJ45 |
Cage | 591926-001 | Revision and Configuration Management (RCM) blank cage |
Capacitor | 660092-001 | Capacitor Pack with 610mm (24 inches) long cable - Provides back up power to the Flash-Backed Write Cache (FBWC) memory module for up to 80 seconds in the event of a system power failure - For use with Smart Array Controllers |
Controller | 633538-001 | Smart Array P420 controller board - PCIe x8 low profile SAS controller - Has two internal x8 wide mini-SAS ports - For up to 6Gb/sec transfer rate for SAS and SATA - Does not include memory or backup power |
Drive | 653957-001 | 600GB hot-plug dual-port SAS hard disk drive - 10,000 RPM, 6Gb/sec transfer rate, 2.5-inch small form factor (SFF), Enterprise, SmartDrive Carrier (SC) - Not for use in MSA products |
Fan | 600659-001 | System fan non-redundant - 80mm (3.14in) |
Hardware | 668890-001 | Front cage for graphics processing unit (GPU) |
Hardware | 590629-001 | Revision and Configuration Management (RCM) chassis kit - Includes RCM chassis, backplane board, interconnect board, micro DB9 board, 30 watts AC adapter, mini DB9 data cable, and hood label |
Hardware Kit | 669741-001 | Miscelaneous plastics and cable kit |
Heat Sink | 709990-001 | SL200 series virtual connect (VC) processor heatsink - Includes alcohol pad and heatsink installation card |
Heat Sink | 709991-001 | SL200 series virtual connect (VC) processor heatsink - Includes alcohol pad and heatsink installation card |
Holder | 669291-001 | Flash-based write cache (FBWC) capacitor pack holder |
Memory (DIMM) | 698807-001 | 8GB, 1600MHz, PC3-12800R-11, DDR3, dual-rank x4, 1.50V, registered dual in-line memory module (DIMM) |
Memory Module | 633542-001 | 1GB flash backed write cache (FBWC) memory module, 72-bit wide - Does not include the controller board or capacitor module - For use with the P420 and P421 Smart Array controllers |
Module | 590634-001 | Raw Device Mappings (RDM) module assembly |
Module | 621129-001 | s6500 Raw Device Mappings (RDM) module assembly |
PC Board | 671914-001 | Backplane board for hard drive disk |
PC Board | 669752-001 | Left board for L2/Graphics Processing Unit (GPU) power with bracket |
PC Board | 669754-001 | Left personality board |
PC Board | 700573-001 | PE3 24X riser board - 2U form factor |
PC Board | 700574-001 | PE3 Graphics Processing Unit (GPU) Internal Redundant Power System (INTRPS) board - 2U form factor |
PC Board | 671916-001 | Rear riser for Graphics Processing Unit (GPU) board |
PC Board | 576887-001 | Revision and Configuration Management (RCM) board module assembly |
PC Board | 669753-001 | Right board for L2/Graphics Processing Unit (GPU) power with bracket |
PC Board | 671624-001 | Riser board - Advanced Lights Out Manager (ALOM) |
PC Board | 663289-001 | S6500 backplane - Power, data, high-efficiency |
PC Board | 701491-001 | Second PE3 (x32) Graphics Processing Unit (GPU) board - 2U form factor |
PC Board | 692492-001 | System board (motherboard) |
PC Board | 802611-001 | System motherboard with SL230 |
PDU | 571711-001 | Power distribution unit (PDU) - Performance Optimized Datacenter (POD), optimized master, 3-phase, C13 - Includes one Duratherm II label, 2.5cm (1.0in) long (International) |
Power Cord | 142258-001 | AC power distribution unit (PDU) power cord (Black) - 250VAC, 16AWG, 2.0m (6.6ft) long - Includes IEC-320 C14 (M) connector to IEC 320 C13 (F) connector |
Power Cord | 142258-002 | AC power distribution unit (PDU) power cord (Black) - 250VAC, 16AWG, 2.5m (8.2ft) long - Includes IEC-320 C14 (M) connector to IEC 320 C13 (F) connector |
Power Supply | 660185-001 | 1200 watt AC Common Slot (CS) 'Platinum Plus' hot-plug power supply - Installs in computer chassis as primary or redundant supply (94% efficiency) - Requires 100-240VAC at 50/60Hz - Multiple power supplies used in the sever must be the same model number |
Processor | 670523-001 | Intel Xeon E5-2670 Eight-Core 64-bit processor - 2.60GHz (Sandy Bridge-EP, 20MB Level-3 cache, Intel QuickPath interconnect (QPI) speed 8.0 GT/s, 115 watt thermal design power (TDP), FCLGA 2011-pin socket) |
Rack Mount Kit | 600663-001 | Rack managment arm assembly - 4U narrows down to 2U |