Keyword |
Part Number |
Description |
Adapter | 649940-001 | 10GB 554FLB network adapter - Ethernet, 2-port, Flexible LAN on Motherboard (FlexibleLOM) |
Adapter | 616012-001 | Ethernet 1Gb 332T adapter - 2-port, 4Gb/s full duplex aggregate, with Broadcom NetXtreme BCM5720 chipset |
Adapter | 789897-001 | FlexibleLOM Ethernet adapter - Four 10/100/1000 Mbps full duplex ports |
Adapter | 656088-002 | Fourteen Data Rate (FDR) InfiniBand (IB) adapter - 10GbE, CX3, 4X, 2-port |
Adapter | 738191-001 | H221 Gen3 host bus adapter - PCIe 3.0, 6Gb/s bandwidth per physical link, eight SAS ports |
Airflow Guide | 662527-001 | Airflow baffle - Translucent plastic baffle that mounts behind the fan cage on top of the processor heat sinks |
Airflow Guide | 670028-001 | DIMM memory baffle - Right side |
Airflow Guide | 670029-001 | Standard DIMM baffle, left with T-15 Torx screwdriver and DIMM tool |
Arm | 675606-001 | Cable management arm kit - Guides the power and interface cables to prevent binding when the server is slid in and out of the rack - Mounts to the rear of the rack |
Bezel | 662529-001 | 2U security bezel assembly - Locking cover that covers the front of the server to protect from removing the hard drives or accessing the optical drive |
Bezel | 204507-001 | Front bezel for UPS R3000 XR (Black) |
Bracket | 784960-001 | Mezzanine card bracket/assembly |
Bracket | 463935-001 | Power Distribution Unit (PDU) mounting bracket kit - 1U form factor high |
Cable | 573696-001 | Data communications cable - C13-C14, jumper, 5-piece Power Line (5PL), 1.8m (6ft) long |
Cable | 573694-001 | Data communications cable - C13-C14, jumper, Single Power Line (SPL), 3m (9.8ft) long |
Cable | 717431-001 | External cable - iPass x 4 HD to HD 3.0
|
Cable | 416003-001 | HP c-Class blade SUV cable - Performs server blade administration, configuration and diagnostic procedures |
Cable | 675613-001 | Power cable - For 8-bay or 16-bay small form factor (SFF) server models - Connects between the hard drive backplane board and the system input-output (I/O) board |
Cable | 675610-001 | Ribbon Mini-SAS storage cable - For the 8-bay or 16-bay Small Form Factor (SFF) server models - Connects between the hard drive connector backplane board and the system I/O board |
Cable | 711595-001 | USB cable - Type A to micro B 12, blue |
Cage | 688038-001 | 8-bay Small Form Factor (SFF) drive cage - For adding eight additional SFF drives (8+8-bay configuration) in place of the DVD drive module |
Cage | 662518-001 | Fan cage assembly (includes the fan backplane board) - Holds six fan modules - Mounts in the bottom of the chassis between the hard drives and the system I/O board |
Cage | 670943-001 | Hard drive cage, 8-bay Small Form Factor (SFF) - Includes hard drive connector backplane board - Mounts in the 8-bay SFF front panel cage (two can be used if no optical drive is needed) |
Cage | 698636-001 | Hard Drive Disk (HDD) backplane board with 8 Small Form Factor (SFF) cage |
Cage | 662526-001 | PCI riser cage - L-shaped metal structure that mounts towards the rear of the server - Capable of mounting two or three PCIe cards depending on which riser board is used (Does not include the riser board) |
Cage | 662537-001 | Processor cage assembly - Includes hardware components for the heatsink retaining bracket - Screws to system input-output (I/O)board |
Capacitor | 660092-001 | Capacitor Pack with 610mm (24 inches) long cable - Provides back up power to the Flash-Backed Write Cache (FBWC) memory module for up to 80 seconds in the event of a system power failure - For use with Smart Array Controllers |
Capacitor | 660091-001 | Flash-backed write cache (FBWC) capacitor cable pack - Includes 30cm (12in) long cable |
Chassis | 739721-001 | Chassis small form factor assembly |
Chassis | 709382-001 | Non-standard (tall) three-rank DIMM baffle left - With T-15 Torx screwdriver and DIMM tool |
Chassis | 709381-001 | Non-standard (tall) three-rank DIMM baffle right |
Controller | 670026-001 | Smart Array P220i controller |
Cover | 670033-001 | Hard drive blank (cover) - To fill empty small form factor (SFF) drive bays |
Display | 519349-001 | Module - LCD widescreen kit |
Drive | 802911-001 | 1.9TB SAS Solid State Drive (SSD) - Read intensive (RI), 2.5-inch small form factor (SFF), 12Gb/s interface, hot-plug, smart carrier (SC), supports G8 servers and beyond |
Drive | 759546-001 | 300GB hot-plug SAS hard disk drive - 15,000 RPM, 12Gb/sec transfer rate, 2.5-inch small form factor (SFF), SmartDrive Carrier (SC), Enterprise |
Drive | 653956-001 | 450GB hot-plug dual-port SAS hard disk drive - 10,000 RPM, 6Gb/sec transfer rate, 2.5-inch small form factor (SFF), Enterprise, SmartDrive Carrier (SC) - Not for use in MSA products |
Enclosure | 695142-001 | Blade 3000c enclosure tape - No drive |
Fan | 700517-001 | Fan assembly RH |
Fan | 662520-001 | Hot-pluggable fan module assembly - Includes the locking latch |
Fan | 413996-001 | System active cool 200 fan module |
Filler | 414051-001 | Device bay plastic blank |
Filler | 414053-001 | Interconnect blank |
Filler | 414054-001 | Onboard administrator module blank |
Filler | 416043-001 | Power supply blank |
Hardware | 670024-001 | Access panel - Top cover |
Hardware | 490992-001 | Assembly retention power cord - Includes left and right brackets |
Hardware | 414052-001 | Fan blank |
Hardware | 670025-001 | Front panel with hard drive cage assembly - Includes bezel |
Hardware Kit | 687953-001 | Hardware blank kit - Includes an optical drive blank cover, fan blank, processor blank, and power supply blank cover |
Hardware Kit | 662519-001 | Hardware blank kit - Includes the FlexibleLOM blank cover, PCIe riser cage blank cover, expansion slot blank cover, optical drive blank cover, and fan module blank |
Hardware Kit | 432463-001 | Hardware kit - Contains device bay shelf, vertical cable cover, and left LCD cap |
Hardware Kit | 671354-001 | Hardware kit - Includes a power supply blank (cover), power cord clip, and fan module blank |
Hardware Kit | 496058-001 | Misc hardware kit - Includes power supply blank cover, heatsink blank, optical drive blank cover, fan blank, full-length expansion slot cover, low-profile expansion slot cover, PCI retainer, PCI top retainer, PCI end retainer, and PCI removable retainer |
Hardware Kit | 662523-001 | Miscellaneous hardware kit - Includes fan brackets (left and right), DVD cable routing guide, DIMM side cable guide, and DVD cable retainer |
Hardware Kit | 709863-001 | Plastics kit - Left front bezel |
Hardware Kit | 709864-001 | Plastics kit - Right front bezel |
Heat Sink | 670027-001 | Heatsink blank |
Heat Sink | 670031-001 | Processor one heatsink |
Heat Sink | 670032-001 | Processor two heatsink |
Holder | 687957-001 | Capacitor (battery) pack holder - Can hold two capacitor packs |
Memory (DIMM) | 715284-001 | 16GB, 1600MHz, PC3L-12800R-11, DDR3, quad-rank x4, 1.35V, registered dual in-line memory module (RDIMM) - Supported use with E5-2600 v2 series processors |
Memory (DIMM) | 664688-001 | 4GB, 1333MHz, PC3L-10600R-9, DDR3, single-rank x4, 1.35V, registered dual in-line memory module (RDIMM) |
Module | 666226-001 | AC intelligent controller module |
Module | 708046-001 | HP c7000 Onboard Administrator with KVM |
Module | 415839-001 | Insight management LCD display module |
Module | 684370-001 | NAND-type flash module for smart array controllers |
Module | 503826-001 | Onboard Administrator with Keyboard, Video, Mouse (KVM) |
Module | 740127-001 | SPS - Fan interconnect cable |
Panel | 662534-001 | Access panel - Top cover for the 8-bay small form factor (SFF), and 8-bay large form factor (LFF) model servers |
Panel | 464072-001 | Rear security panel |
PC Board | 662524-001 | 3-slot PCIe riser board (standard) - Includes one x16 slot, and two x8 slots |
PC Board | 689229-001 | AMP midplane assembly (fan power board) - Includes rear cage, for enclosure SKUs that start with 6xxxxx-xxx or 7xxxxx-xxx |
PC Board | 709865-001 | Discovery services board |
PC Board | 656089-001 | Infiniband 4X FDR CX3 Host Channel Adapter (HCA) - Dual-port, FDR/EN 10/40Gb, PCIe 2.0 x8, 544QSFP |
PC Board | 709866-001 | Kamikaze 2 board - New connectors |
PC Board | 734345-001 | PCA small form factor HDD backplane |
PC Board | 662528-001 | Power supply backplane board assembly |
PC Board | 676247-001 | SAS hard drive backplane |
PC Board | 700521-001 | Small form factor IO assembly |
PC Board | 739723-001 | SPS - Fan Interface PCA |
PC Board | 716550-001 | System board - Includes base pan assembly, guide pin assembly for mezzanine frame, alcohol pad for processor, and thermal grease syringe |
PC Board | 738239-001 | System board with base pan - with with Intel Xeon 2600 processor and Intel Xeon 2600 v2 processor support |
PC Board | 801939-001 | System I/O board (motherboard) assembly - Includes sub pan (tray) |
Power Cord | 142258-003 | AC Power Distribution Unit (PDU) power cord (Black) - 250V, 16AWG, 3m (9.8ft) long - Has C14 (M) connector to C13 (F) connector |
Power Cord | 142258-001 | AC power distribution unit (PDU) power cord (Black) - 250VAC, 16AWG, 2.0m (6.6ft) long - Includes IEC-320 C14 (M) connector to IEC 320 C13 (F) connector |
Power Cord | 142258-002 | AC power distribution unit (PDU) power cord (Black) - 250VAC, 16AWG, 2.5m (8.2ft) long - Includes IEC-320 C14 (M) connector to IEC 320 C13 (F) connector |
Power Cord | 747034-001 | Cord AC line 16A, C19 to C20 - Gray color 2M (6.56)ft |
Power Cord | 538266-001 | Power cord (black) - 1.82m (6ft) long, 12A (Japan) |
Power Cord | 142258-006 | Power Distribution Unit (PDU) power cord (Black) - IEC 320 C14 (M) connector to IEC 320 C13 (F) connector - 1.37m (4.5ft) long - 250V, 16A |
Power Supply | 660184-001 | 460 watt AC Common Slot (CS) 'Platinum Plus' hot-plug power supply - Installs in computer chassis as primary or redundant supply (94% efficiency) - Requires 100-240VAC at 50/60Hz - Multiple power supplies used in the sever must be the same model number |
Power Supply | 536404-001 | 460W AC Common Slot (CS) 'Gold' hot-plug power supply - Installs in the computer chassis as primary or redundant supply (92% efficiency) - Requires 100-240VAC at 50/60Hz - Multiple power supplies used in the sever must be the same model number |
Power Supply | 588733-001 | Power Supply - 2450 watts, 12V-OUT, hot pluggable, high effyciency |
Power Supply | 570493-001 | Power supply hot-plug 2400W - Input voltage 200-240VAC, 50/60Hz, 50 watts - Output voltage 12.25V, 200A |
Processor | 757830-001 | Intel Xeon E5-2673v2 Eight-Core 64-bit processor - 3.3GHz (Sandy Bridge-EP, 25MB cache, Intel QuickPath interconnect (QPI) speed 8.0 GT/s, 110 watt thermal design power (TDP), with jacket |
Processor | 773059-001 | Intel Pentium G3240 processor - 3.10GHz, 3MB cache, 54 watt thermal design power (TDP), socket FCLGA1150 |
Processor | 730243-001 | Intel Xeon E5-2603 v2 Quad-Core 64-bit processor - 1.80GHz (Ivy Bridge-EP, 10MB Level-3 cache, Intel QuickPath interconnect (QPI) speed 6.4 GT/s, 80 watt thermal design power (TDP), socket FCLGA 2011) |
Processor | 730239-001 | Intel Xeon E5-2640 v2 Eight-Core 64-bit processor - 2.00GHz (Ivy Bridge-EP, 20MB Level-3 cache, Intel QuickPath interconnect (QPI) speed 7.2 GT/s, 95W thermal design power (TDP), socket FCLGA 2011) |
Processor | 800177-001 | SPS-PROC 3.2GHz/E7-8891v2/10core/37.5MB |
Rack Mount Kit | 432461-001 | Rackmount kit - Includes right and left shelf rails, and M5 square hole cage and clip nuts |
Rail Kit | 662535-001 | Rack mounting rail kit - For 2U server models with Small Form Factor (SFF) drives - Includes left and right telescoping ball bearing type slide rails |
Rail Kit | 700520-001 | Rail kit 2U |
Regulator | 700519-001 | DC power regulator |
Sleeve | 711994-001 | R2.04 administration onboard sleeve |
Switch | 663656-001 | Blade switch module assembly - RJ45, Small Form Pluggable (SFP), hardware-based wire-speed access control lists (ACLs), secure management via SSHv2 and SNMPv3 |