Keyword |
Part Number |
Description |
| RC1-9881-000CN | 1 x 500-sheet input tray paper feed roller guide |
| RC1-9872-000CN | 1 x 500-sheet paper input tray left cover |
| RC1-9874-000CN | 1 x 500-sheet paper input tray lower right cover |
| RC1-9871-000CN | 1 x 500-sheet paper input tray rear cover |
| RC1-9884-000CN | 1 x 500-sheet paper input tray tape door |
| RC1-9873-000CN | 1 x 500-sheet paper input tray upper front cover |
| FS6-0822-000CN | 16/33-tooth gear - Runs on the shaft located under the folding roller |
| RL1-1321-000CN | 3 x 500-sheet paper input tray right front cover |
| FS5-3576-000CN | 30-tooth gear |
| Q3931-67923 | 500-sheet paper input tray - For use with tray 3, 4, or 5 |
| Q3931-67918 | 500-sheet paper input tray cassette - For use with tray 2 |
| 4S3-0171-000CN | 50-tooth gear - Located on the saddle assembly |
| RC1-8961-000CN | Air duct - Deflects air from fan FM7 |
| RL1-1291-000CN | Air filter - Located on the upper right side of the printer behind the upper right cover |
| 4G1-1498-000CN | Area sensor PCA assembly - Located on the area sensor holder assembly |
| RC1-9695-000CN | Assist arm cap plate - Located on the upper guide assembly |
| 4S3-1050-000CN | Ball bearing (6902ZZNR) |
| RC1-9687-000CN | Blanking sheet - Mounts on the shield plate |
| RC1-8734-000CN | Bushing - Located on the registration second transfer assembly |
| RC1-4585-000CN | Bushing - Located on the side cover assembly (four needed) |
| RC1-9915-000CN | Bushing - Mounts on the lock shaft next to the arm lock on the 1 x 500-sheet paper input tray |
| RC1-9688-000CN | Cable guide - Located next to the paper feed cogged belt on the intermediate feed main body |
| RC1-9306-000CN | Cable guide ´A´ |
| RC1-9307-000CN | Cable guide ´B´ |
| RC1-9308-000CN | Cable guide ´C´ |
| RC1-9312-000CN | Cable guide ´D´ |
| RC1-9318-000CN | Cable guide ´E´ |
| RC1-9323-000CN | Cable guide ´F´ |
| RC1-9276-000CN | Cartridge duct - Plastic duct that vents air from the fan (FM3) to the cartridge area |
| RC1-9277-000CN | Cartridge fan holder - Holds fan (FM3) |
| Q3931-67926 | Cartridge interface assembly |
| RC2-1315-000CN | Caster - Used on pedestal assembly (universal) |
| RC1-9208-000CN | Chassis rubber foot |
| RC2-1279-000CN | Connector tray cover - Mounts on the upper left side of the rear cover on the stapler/stacker unit |
| RK2-1377-000CN | Cooling fan - Provides air to the print cartridge and imaging drum area |
| RC1-8925-000CN | Damper gear - Mounts next to the fuser one way gear assembly |
| RC1-9043-000CN | Door band hinge |
| RC1-9896-000CN | Double lock front caster - For the 1 x 500-sheet paper input tray |
| RC1-9235-000CN | Drawer guard plate |
| RC1-9511-000CN | Dulexing feed motor cover |
| RL1-1335-000CN | Duplexing feed upper guide |
| FC5-5542-000CN | Entrance sheet guide - Mounts on the cross member entrance guide |
| RC1-9324-000CN | Environment sensor holder - Holds the humidity sensor unit |
| RC1-9360-000CN | Face down drive cover |
| RC1-8959-000CN | Face down inner guide |
| RC1-8964-000CN | Face down joint duct - Located behind the fuser assembly |
| RM1-3390-000CN | Face down unit-1 cable |
| RC1-9189-000CN | First estrangemen arm |
| FB5-5937-020CN | Flag sensor - Located next to the ball bearing (6902ZZNR) - Mounts on the rear saddle side plate |
| FB3-7979-000CN | Flag sensor - Located on the rear saddle side plate |
| RC1-9620-000CN | Flange pulley - Attaches to the paper feed cogged belt located on the intermediate feed main body assembly |
| FM2-0720-000CN | Flexible cable mount assembly |
| RK2-1356-000CN | Flexible flat cable - Connects to the formatter board through the (J9001) connector and to the DC controller PCA through (J123) connector |
| 4A3-1783-000CN | Folding roller |
| 4A3-1763-000CN | Front adjustment arm - Located on the folding roller on the saddle assembly |
| RC1-9190-000CN | Front fuser fan plate |
| RC1-8931-000CN | Front fuser rail |
| RM1-3225-000CN | Front grip support assembly |
| RC1-9246-000CN | Front sensor plate - For sensor (SR32) |
| RC1-9332-000CN | Fuser cable guide - Located on the fuser power supply assembly |
| RC1-9278-000CN | Fuser fan holder - Holds fan (FM2) |
| RL1-1216-000CN | Fuser motor (M11) plate |
| RM1-3218-000CN | Fuser power supply assembly |
| Q3931-67914 | Fusing assembly - For 110 VAC to 127 VAC - Bonds toner to the paper with heat |
| Q3931-67941 | Fusing assembly - For 220 VAC to 240 VAC - Bonds toner to the paper with heat |
| RC2-1356-000CN | Grounding plate - Located on the rear left side of the saddle assembly |
| 4A3-1955-000CN | Grounding plate - Used only for booklet maker series |
| RC1-9328-000CN | High voltage connector holder - Located on the left side of the printer chassis - Attaches behind the main switch cover |
| RK2-2376-000CN | Humidity sensor unit |
| RC1-9326-000CN | HVT-A (high-voltage transmission) guard plate |
| RC1-9220-000CN | Interlock door shutter lever |
| Q3938-67965 | Intermediate transfer belt (ITB) assembly |
| RM1-3228-000CN | Intermediate transfer belt (ITB) front lock support assembly |
| RC1-9348-020CN | Internal right cover |
| RK2-1354-000CN | Laser flexible flat cable - Connects the laser driver PCA through (J501B) connector and the DC controller PCA through (J127) connector |
| RK2-1355-000CN | Laser flexible flat cable - Connects to the laser driver PCA through (J501A) connector and the DC controller PCA through (J126) connector |
| Q3931-67907 | Laser/scanner assembly kit |
| FC5-5024-000CN | Latch knob - Mounts on the open/close guide on the saddle guide assembly |
| RC2-1734-000CN | LED window - Mounts on the upper left side on the rear cover assembly of the stapler/stacker unit |
| RC1-9336-000CN | Left cover assembly - Plastic cover that protects the left side of the printer |
| RC1-9344-000CN | Left rear cover - Plastic cover that protects the left rear part of the printer - Corner cover with slot for I/O connectors |
| RL1-1213-000CN | Left top rail - For the 1 x 500-sheet paper input tray |
| 4A3-1782-000CN | Lever stopper |
| RC1-9913-000CN | Lock arm - For the 1 x 500-sheet paper input tray - Mounts on the lock shaft |
| RC1-9883-000CN | Lock lever - This is the rear cover lock for the 1 x 500-sheet paper input tray |
| RC1-9912-000CN | Lock shaft - For the 1 x 500-sheet paper input tray |
| RC1-9900-000CN | Lock shaft support - Located on the 1 x 500-sheet paper input tray |
| RM1-4110-000CN | Lower entrance guide assembly - Located on the saddle paper feeder assembly |
| RC2-1351-000CN | Lower internal cover (stapler/stacker only) |
| RC2-1280-000CN | Lower left cover - Mounts on the saddle tray assembly |
| RC1-9300-000CN | Main button switch |
| Q3931-67911 | Main drive assembly - Mounts on the right side of the printer - Metal plate with gears attached - Also known as main gear drive assembly |
| RC1-9211-000CN | Main switch cover |
| 4G3-0670-000CN | Motor mount assembly |
| RC1-8527-000CN | Multi-purpose/tray 1 blanking cover |
| RL1-1283-000CN | Multi-purpose/tray 1 right guide assembly |
| RC1-8526-000CN | Multi-purpose/tray 1 upper guide |
| FG3-2903-000CN | Operation tray cable |
| RC1-9351-000CN | Paper delivery cover |
| RC1-9674-000CN | Paper feed cogged belt |
| Q3931-67920 | Paper pick-up retard roller - Used for tray 1 |
| RL1-1289-000CN | Paper pick-up roller - For the 1 x 500-sheet and 3 x 500-sheet paper input tray |
| Q3931-67919 | Paper pick-up roller - Includes one pick-up roller, and two paper feed rollers - Use with tray 2,3,4, and 5 |
| RC1-8928-000CN | Paper sensing lever - Senses paper in intermediate transfer belt (ITB) duct assembly |
| RC1-9201-000CN | Paper tray cassette back end cover - Protects the back end of the cassette tray rail |
| 4A3-1764-000CN | Rear adjustment arm - Located on the folding roller on the saddle assembly |
| RL1-1210-000CN | Rear cover - Plastic cover that protects the rear part of the printer |
| RC2-1278-000CN | Rear cover - Plastic cover that protects the rear part of the stapler/stacker unit |
| RC1-8939-000CN | Rear fuser rail |
| RM1-3226-000CN | Rear grip support assembly |
| RC1-9703-000CN | Rear mount cover plate assembly |
| FB3-7934-000CN | Rear rack slide - Mounts on the rear saddle side plate |
| RC1-9206-000CN | Rear reverse scanner rail |
| RC1-8511-000CN | Retainer ´C´ type |
| FM2-0725-090CN | Return-roller assembly - For the stapler/stacker and booklet-maker |
| RL1-1215-000CN | Right cassette rail - For the 1 x 500-sheet paper input tray |
| RL1-1310-000CN | Right cassette rail - For the 1 x 500-sheet paper input tray |
| RC1-9706-000CN | Right cover assist - Located on the lower guide assembly |
| FC5-5021-000CN | Right latch claw |
| FB3-7925-030CN | Roller flag - Mounts next to the 39-tooth pulley on the saddle assembly |
| FB3-7973-000CN | Roller holder 2 - For the cam shaft |
| 4A3-1779-000CN | Rotation plate - Located next to the dowel pin on the saddle assembly |
| FM2-0756-000CN | Saddle guide assembly - Mounts on the front saddle side plate - For the booklet maker |
| RM1-4136-000CN | Saddle paper feeder assembly - Includes saddle motor assembly and lower entrance guide assembly - For the stapler/stacker |
| RC1-9309-000CN | Scanner fan duct - Directs air into scanner area |
| RC1-9334-000CN | Scanner fan duct - Directs air into scanner area |
| RC1-9279-000CN | Scanner fan holder - Holds fan (FM1) |
| RC1-9260-000CN | Scanner thermistor holder |
| RC1-9256-000CN | Screw tray - Attaches next to the cable guide E |
| Q3931-67909 | Secondary transfer assembly - Located at bottom of the intermediate transfer belt (ITB) assembly |
| WG8-5593-000CN | Sensor (TLP1242) PC board - Small board with flag activated photosensor |
| 4G1-2285-000CN | Sensor cable - Located on the saddle tray assembly - Connects on the photo interrupter (TLP1242) |
| RC2-1284-000CN | Side wall guide - Mounts on the upper height panel on the booklet maker unit |
| FL2-0821-000CN | Solenoid (SL34) - Buffer rear end holding solenoid drive signal |
| RC1-9233-000CN | Spring leaf |
| FM2-0722-000CN | Stapler sub-assembly - Includes upper and lower clinch guide, staple unit and motor (M14), bin sensor flag, photo interrupter (PI46), and staple mount |
| RC1-9921-000CN | Stock door - For 1 x 500-sheet paper input tray |
| RC1-9901-000CN | Switch cover plate - For the 1 x 500-sheet paper input tray door open detection switch (SW103) |
| 4S3-2117-000CN | Tension spring - Provides tension to the front pressure plate (big spring) |
| 4S3-2116-000CN | Tension spring - Provides tension to the front pressure plate (small spring) |
| Q3931-67913 | Toner cartridge drive assembly - Metal plate with gears attached - Provides movement to the cyan and black cartridges |
| Q3931-67912 | Toner cartridge drive assembly - Metal plate with gears attached - Provides movement to the yellow and magenta cartridges |
| RK2-1370-000CN | Toner feed motor (M16) - Drives the black toner feed screws and waste toner feed screws - Located on the toner cartridge drive assembly |
| RK2-1366-000CN | Toner feed motor (M17) - Drives the yellow, magenta, and cyan toner feed screws and waste toner feed screws - Mounts on the toner cartridge drive assembly |
| RL1-1284-000CN | Top cover assembly - Protects the top part of the main printer chassis |
| RC1-8519-000CN | Torque limiter - Located next to paper pick-up retard roller in multi-purpose/tray 1 assembly |
| FC5-3657-000CN | Torque limiter - Torque limiter for the swing press shaft |
| FB3-7980-000CN | Torsion spring - Provides torsion to flag sensor located on the rear saddle side plate |
| RC1-9244-000CN | Torsion spring - Provides torsion to the front fuser fan plate |
| FC5-5005-000CN | Torsion spring - Provides torsion to the paper sensing sensor flag located on the lower height panel |
| RM1-3230-000CN | Transfer contact holder assembly |
| RC1-9350-000CN | Upper front cover - Large rectangle shaped plastic cover located on left side on the top of the printer |
| RC2-1283-000CN | Upper height panel - Located on the stapler/stacker unit |
ADF Assembly | Q7829-67917 | ADF float assembly |
ADF Assembly | Q3938-67994 | ADF maintenance kit - Includes the ADF paper pick-up roller assembly and the separation pad assembly |
ADF Assembly | Q3938-67943 | Automatic document feeder (ADF) whole unit assembly |
Arm | RL1-1272-000CN | Auxiliary arm - Mounts on the drive frame on the intermediate paper transfer unit (IPTU) |
Arm | RC2-1293-000CN | Paper delivery gate arm |
Arm | RM1-4411-000CN | T2 guide arm assembly |
Bearing | XG9-0586-000CN | Ball bearing - Located on the fixing one way gear assembly |
Belt | RM1-3684-020CN | Drive belt assembly - Drives the paper feed belt |
Belt | XF2-3837-340CN | Timing belt - Belt that runs on the 30-tooth pulley on the saddle assembly |
Belt | XF2-1608-840CN | Timing belt - Located on the return roller assembly |
Belt | XF9-0748-000CN | Timing cogged belt - Located on the front side plate on the finisher main body |
Belt | XF2-1607-860CN | Timing cogged belt - Runs on ejection stack motor assembly (M32) |
Belt | Q3938-67935 | Transmission timing belt - Maintain constant speed during power transmission - Located on the transmission assembly |
Bushing | FU5-1169-000CN | Bushing - Attaches to the rear tray side plate - Located next to the 26-tooth gear on the tray drive shaft assembly |
Cable | Q3938-67948 | ADF cable assembly - Interconnects the ADF assembly to the flatbed scanner assembly |
Cable | RM1-5030-000CN | Cable TP/T2 open sensor |
Cable | RM1-3624-000CN | Color plane registration joint cable |
Cable | RM1-3389-000CN | Control Panel cable |
Cable | RM1-3610-000CN | DC controller board power cable |
Cable | RM1-3560-000CN | Drawer cable - Located on the fin lock assembly in the intermediate feed main body |
Cable | RM1-3391-000CN | Face down unit-2 cable |
Cable | Q3938-67912 | Flat cable, 28, 940, A |
Cable | Q3938-67913 | Flat cable, 28, 970, B |
Cable | RM1-3617-000CN | Front cable - Connetcs the environment sensor, the delivery unit cooling fan, the cartridge front area cooling fan, and the VOC fan to the DC controler PC board |
Cable | RM1-4409-000CN | Fuser bias cable assembly |
Cable | RM1-3612-000CN | Fuser joint cable |
Cable | RM1-3217-000CN | Fuser motor cable |
Cable | RM1-5029-000CN | Fuser open sensor cable |
Cable | 5851-2501 | Hard drive power SATA cable - Provides power to the hard drive connects to the mother board |
Cable | RM1-3623-000CN | Interface joint cable |
Cable | RM1-3561-000CN | Intermediate paper transfer unit (IPTU) drawer connector cable assembly - Located on the fin lock assembly |
Cable | RM1-3599-000CN | MFP AC cable - Has connector J3005 on one side and J301 on the other |
Cable | RM1-3564-000CN | Motor cable - For media feed stepping DC motor (M201) |
Cable | RM1-3563-000CN | Motor cable - For media feed stepping DC motor (M202) |
Cable | RM1-3630-000CN | Multi-purpose/tray 1 cable |
Cable | RM1-3574-000CN | Option sensor PCA connect cable |
Cable | RM1-3622-000CN | Panel joint cable |
Cable | RM1-3575-000CN | Paper pick-up option cable - Used for the 1 x 500-sheet input tray |
Cable | RM1-3571-000CN | Paper pick-up option drawer cable |
Cable | Q3938-67942 | PCIe Cable - Connects to the SCUID board on havic assembly |
Cable | RM1-3572-000CN | Pick-up option door switch cable |
Cable | RM1-3576-000CN | Pick-up option lifter unit cable |
Cable | RM1-3573-000CN | Pick-up option PCA connect cable |
Cable | RM1-3618-000CN | Rear lower cable |
Cable | RM1-3619-000CN | Rear upper cable |
Cable | RG5-1928-000CN | Registration cable assembly - Includes 7P and 3P connectors |
Cable | 4G1-2283-000CN | Saddle unit cable |
Cable | RM1-3620-000CN | Scanner joint cable |
Cable | FG3-2892-000CN | Solenoid cable |
Cable | 4G3-1777-000CN | Staple connecting cable assembly |
Cable | RM1-3385-000CN | Toner feed motor (M16) cable |
Cable | RM1-3383-000CN | Toner feed motor (M17) cable |
Cable | RM1-3640-000CN | Waste toner sensor cable |
Cage | RM1-3253-000CN | Formatter board cage assembly - Metal shield and enclosure for the formatter board |
Cartridge | CB390-67901 | Black toner cartridge - Prints approximately 19,500 standard pages |
Cartridge | CB381-67901 | Cyan print toner cartridge - For the Color LaserJet CP6015 series |
Cartridge | CB383-67901 | Magenta print toner cartridge - For the Color LaserJet CP6015 series |
Cartridge | CB382-67901 | Yellow print toner cartridge - For the Color LaserJet CP6015 series |
Case | Q3938-67910 | Power supply case assembly - Case where power supply mount (Not the power supply unit) |
Case | Q3938-67984 | Power supply case assembly - Case where power supply mount (Not the power supply unit) |
Case | RM1-3232-000CN | Thermopile case assembly |
Caster | RC3-2994-000CN | Rear caster - For the 1x500-sheet paper deck assembly |
Caster | RC1-9917-000CN | Stationary rear caster - Mounts on the bottom frame of the 500-sheet high capacity input (HCI) paper feeder assembly |
Clamp | WT2-5694-000CN | Snap-in cable clamp - Secures the drive motor cable from the controller PC board to the metal support pan |
Clip | XD9-0234-000CN | E-Type retainer ring |
Clip | XD9-0233-000CN | Retaining E-ring |
Clutch | 4H3-0370-000CN | Electromagnetic shutter clutch (CL31) connector (J1046) |
Connector | VS1-7177-003CN | Connector (3-pin) - ORDER RG5-1928-000CN |
Connector | VS1-7258-007CN | Drawer connector - Connector located on bottom of tray assembly frame on right side, which connects tray assemblies to each other |
Connector | VS1-7257-012CN | Drawer Connector (J1903) - For the 1 x 500-sheet input tray |
Connector | VS1-7177-002CN | Fuser electrical connector |
Control Panel | Q3938-67963 | Control panel assembly - Control buttons and display located on top front of printer |
Cover | RL1-1322-000CN | 1 x 500-sheet paper input tray right front cover |
Cover | Q3938-67946 | ADF front end cover assembly - End cover (cap) |
Cover | Q3938-67970 | ADF jam access cover - Located on the left top side of the printer - To remove paper jam from the ADF |
Cover | Q3938-67921 | ADF lower cover - Plastic cover that protects the lower left part of the ADF unit |
Cover | Q3938-67923 | ADF lower cover - Plastic cover that protects the lower right part of the ADF unit |
Cover | Q3938-67925 | ADF rear cover - Plastic cover that protects the rear part of the ADF unit |
Cover | Q3938-67945 | ADF rear end cover assembly - End cover (cap) |
Cover | Q3938-67924 | ADF top cover - Plastic cover that protects the top part of the ADF unit |
Cover | RC1-9666-000CN | Back cover - Located on top of the shield plate on the intermediate feed main body |
Cover | RC1-9649-000CN | Blanking cover - Located next to the four bushings on the drive frame |
Cover | Q3931-67905 | Face down cover - Output paper cover on top of the printer - Holds the paper after it has been printed |
Cover | Q3938-67926 | Front cover - Plastic L-shaped cover were control panel snaps on |
Cover | RM1-3357-000CN | Front cover assembly - Plastic cover that protects the front door assembly |
Cover | RM1-5953-000CN | Front internal small cover assembly - Located on the upper right side of the front door assembly |
Cover | RM1-4702-000CN | Front option tray cover assembly |
Cover | RM1-5950-000CN | Fuser fan cover assembly - Plastic cover located next to the rear cover assembly |
Cover | RM1-4123-000CN | Inner cover assembly - Inner cover located on the left side of the finisher main body |
Cover | RC1-9667-000CN | Intermediate feed switch cover |
Cover | RM1-4404-000CN | Internal front door cover assembly - Plastic cover located behind the front door assembly |
Cover | RC1-9705-000CN | Left cover assist - Located on the lower guide assembly |
Cover | RM1-3233-000CN | Left side wall cover assembly |
Cover | RM1-4179-000CN | Left upper cover assembly - For the stapler/stacker |
Cover | RL1-1717-000CN | Lower front cover - For the stapler/stacker unit |
Cover | RL1-1477-000CN | Lower internal cover assembly - Internal cover for the saddle assembly - For the booklet maker unit only |
Cover | RM1-3683-000CN | Lower left side cover assembly - Located on the intermediate feed main body |
Cover | RL1-1718-000CN | Lower rear cover - For the stapler/stacker unit |
Cover | RM1-4119-000CN | Middle height cover assembly for the booklet maker unit |
Cover | Q3938-67927 | Plastic screw covers with an adhesive back - Covers screw heads that secure the plastic scanner top cover |
Cover | RM1-4408-000CN | Rear cover assembly - Plastic cover that protects the rear air duct |
Cover | RM1-4415-000CN | Rear right cover assembly |
Cover | RL1-1280-000CN | Right lower cover assembly |
Cover | RM1-3239-000CN | Right side wall cover assembly |
Cover | Q3938-67954 | Roller cover - Plastic cover that protects the ADF pick-up roller |
Cover | RC2-1347-000CN | Slide cover - Plastic cover that slide in to the upper height panel on the stapler/stacker unit |
Cover | Q3938-67920 | Upper cover - Plastic cover that protects the upper left side of the ADF unit |
Cover | Q3938-67922 | Upper cover - Plastic cover that protects the upper right side of the ADF unit |
Cover | RM1-4129-000CN | Upper left cover assembly - Plastic cover that protects the upper left side of the booklet maker |
Deflector | FB3-7928-020CN | Paper deflector (flapper 1) - Shaft with curved deflector fingers - Attaches to the front and rear saddle side plate |
Deflector | FB5-2697-000CN | Paper deflector (flapper 2) - Shaft with curved deflector fingers - Attaches to the front and rear saddle side plate |
Delivery | RM1-3293-000CN | Face down paper delivery assembly |
Delivery | RM1-4130-000CN | Saddle paper delivery assembly |
Diverter | Q3938-67953 | ADF diverter assembly - Diverts paper to duplexer assembly, face up tray or face down delivery assembly |
Door | RM1-3538-000CN | 1 x 500-sheet paper input tray right door assembly |
Door | RM1-3537-000CN | 3 x 500-sheet paper input tray right door assembly |
Door | Q6999-67901 | Front door assembly - For the booklet maker unit |
Door | Q6998-67901 | Front door assembly - For the stapler/stacker unit |
Door | RM1-3333-000CN | Right door sub assembly |
Door | RM1-4121-000CN | Upper cover assembly - Top door located on the stapler/stacker assembly |
Drawer | RM1-3240-000CN | Intermediate transfer belt (ITB) drawer assembly |
Drive | Q3938-67978 | 80GB hard drive - 3.5-inch form factor |
Drive | 0950-4768 | 80GB SATA hard drive - 7,200 RPM, 3.5-inch form factor 26.1mm height |
Drive Assembly | RM1-3280-000CN | Intermediate transfer belt (ITB) estrangement drive assembly |
Drive Assembly | RM1-3222-150CN | Lifter drive assy |
Drive Assembly | RM1-3366-010CN | Multi-purpose/tray 1 drive assembly |
Drum | CB384-67901 | Black imaging drum - For the Color LaserJet CP6015 series |
Drum | CB385-67901 | Cyan imaging drum |
Drum | CB387-67901 | Magenta imaging drum |
Drum | CB386-67901 | Yellow imaging drum |
Duct | RM1-4401-000CN | Intermediate transfer belt (ITB) duct assembly |
Fan | RM1-4394-000CN | Chassis fan assembly - Located on the intermediate feed main body - Includes fan (FM8) and plastic fan bracket |
Fan | Q3938-67938 | Cooling fan - Fan that cools scanner area |
Fan | Q3938-67939 | Cooling fan - Fan that cools the control panel area |
Fan | Q3938-67937 | Cooling fan - Fan that cools the scanner controller board (SCB) area |
Fan | RK2-1382-000CN | Delivery unit cooling fan (FM7) |
Fan | RM1-3364-000CN | Exhaust fan assembly - Cools the fuser area |
Fan | RK2-1378-000CN | Fuser cooling fan (FM2) - Provides air to the fuser area |
Feed Assembly | RM1-3665-000CN | Duplexing feed assembly |
Feed Assembly | RM1-4109-000CN | Saddle paper feeder assembly - Includes saddle motor assembly and lower entrance guide assembly - For the booklet maker |
Filter | Q3931-67906 | Air filter kit |
Flag | Q3938-67951 | ADF paper sensor flag |
Flag | FM2-0718-000CN | Entrance sensor flag assembly - Includes the entrance sensor lever and the entrance sensor arm damper |
Flag | RM1-4391-000CN | Face down full flag assembly |
Foam | Q7829-67909 | ADF reflector foam - White plastic sheet with foam that reflects the light wile scanning |
Frame | RM1-4180-000CN | Upper crossmember assembly |
Fusing Assembly | Q3931-67940 | Fusing assembly - For 110- 127 VAC - Bones toner to the paper with heat |
Fusing Assembly | Q3931-67935 | Fusing assembly - For 110 VAC to 127 VAC - Bonds toner to the paper with heat |
Fusing Assembly | Q3931-67936 | Fusing assembly - For 220 VAC to 240 VAC - Bonds toner to the paper with heat |
Gear | FS6-0829-000CN | 16/56-tooth gear - Runs on the folding roller next to the front adjustment arm |
Gear | FS6-0830-000CN | 16-tooth gear - Runs on the folding roller next to the front adjustment arm |
Gear | FS6-0823-000CN | 16-tooth gear - Runs on the shaft located under the folding roller |
Gear | FS6-0814-000CN | 16-tooth gear/32-tooth pulley - Located on the rear part of the lower pass guide next to the 32-tooth gear/16-tooth pulley |
Gear | FU5-0457-000CN | 17-tooth gear - Attaches to the rear tray side plate |
Gear | RU5-0868-000CN | 22-tooth gear - Small gear that runs on the paper-feed cogged belt |
Gear | FU5-2399-000CN | 29-tooth gear - Runs on the paper feeder motor assembly |
Gear | FU5-0428-000CN | 30-tooth gear - Runs on the timing belt on the finisher lower roller next to the 20-tooth pulley |
Gear | FS6-0815-000CN | 32-tooth gear/16-tooth pulley - Located on the drive support in front of the motor (M5) |
Gear | RU5-0791-000CN | 34-tooth gear - Mounts on the fuser motor plate |
Gear | FU5-0454-000CN | 40-tooth gear - Runs on the swing press shaft assembly - Located between torque limiter and bushing on the rear side plate of the finisher |
Gear | FU5-0435-000CN | 44-tooth gear - Mounts on the front tray side plate attached to the upper tray cross member |
Gear | RU5-0790-000CN | 83/25-tooth gear - Mounts on the fuser motor plate |
Gear Assembly | RM1-3682-000CN | Damper gear assembly - Includes 70-tooth gear and one way hinge - Located on the damper assembly |
Gear Assembly | RM1-3247-020CN | Fuser one way gear assembly |
Glass Assembly | Q3938-67906 | Scanner glass assembly - Glass plate on which the documents are placed to be scanned - Includes large flat bed scanner glass and small ADF scanner glass strip with mounting hardware |
Guide | RM1-4172-000CN | Entrance upper guide assembly - For the stapler/stacker and booklet maker unit |
Guide | RM1-4398-000CN | Front guide reader assembly |
Guide | RM1-4400-000CN | Guide sensor assembly - For fuser open cover detection sensor (SR34) |
Guide | RC1-9607-000CN | Hold guide plate - Located on the left side of the lower guide assembly |
Guide | RM1-3687-000CN | Intermediate feed upper guide assembly |
Guide | RM1-3686-000CN | Intermediate lower feed guide assembly |
Guide | RC1-9185-000CN | Intermediate transfer belt (ITB) front entrance guide |
Guide | RC1-9186-000CN | Intermediate transfer belt (ITB) rear entrance guide |
Guide | RM1-4395-000CN | Intermediate upper feed guide assembly |
Guide | RM1-4135-000CN | Lower height guide assembly |
Guide | 4G3-0725-000CN | Motor guide assembly - Located on the saddle assembly - For motor (M3) |
Guide | RM1-3291-000CN | Multi-purpose/tray 1 guide assembly |
Guide | RM1-4407-000CN | Paper delivery guide assembly |
Guide | RM1-4399-000CN | Rear guide reader assembly |
Guide | Q3938-67915 | Rubber guide - For the scanner glass |
Guide | RM1-4108-000CN | Swing guide assembly - Includes swing roller assembly, swing jam clearing label, swing press assembly, swing roller shaft assembly, and the paper delivery gate arm |
Guide | RU5-6035-000CN | Tray roller guide - Located on the output bin 1 |
Guide | FC5-4221-000CN | Tray roller guide - Mounts on the front side tray plate |
Guide | RM1-4131-000CN | Upper delivery guide assembly - For the saddle assembly |
Hardware | RM1-3531-000CN | Auto-close assembly - Use for the 1x500-sheet and the 3x500-sheet |
Hardware | RM1-3531-060CN | Auto-close assembly - Use for the 1x500-sheet and the 3x500-sheet |
Hardware | RM1-3685-000CN | Fin lock assembly |
Hardware | RM1-4396-000CN | Left assist assembly |
Hardware | Q3938-67928 | Power supply harness |
Hardware | RM1-4397-000CN | Right assist assembly |
Hinge | Q3938-67952 | ADF hinge assembly - For the top cover on the scanner (document lid) |
Hinge | FC5-4991-030CN | Front door hinge (1) |
Hinge | FC5-4992-030CN | Front door hinge (2) |
Holder | FM2-0709-000CN | Area sensor holder assembly |
Holder | WT2-5738-000CN | Cable holder - Secures cable at left front side near DC controller board - White plastic stand-off/holder |
Holder | RM1-3254-000CN | Cartridge contact holder assembly |
Holder | RM1-3216-000CN | Intermediate transfer belt (ITB) gear holder assembly |
Holder | RM1-3252-000CN | Main switch (SW11) holder assembly |
Holder | RM1-4402-000CN | Tag PCA holder assembly |
Interlock | RM1-3589-000CN | Interlock switch assembly - Where the right door open detection sensor (SR11) mounts on |
Inverter | Q3938-67905 | Inverter assembly |
Knob | FB3-7881-000CN | Knob - Mounts on the lower internal cover on the left side of the saddle assembly |
Lifter | RM1-3222-020CN | Lifter-drive-assembly |
Link | 4G3-0271-000CN | Slide link assembly - Located on the top door assembly (upper cover) |
Lock | RM1-3215-000CN | Intermediate transfer belt (ITB) rear lock support assembly |
Lock | Q3931-67925 | Security lock adapter kit |
Lock | 4G3-0210-000CN | Upper cover lock assembly |
Maintenance Kit | Q3938-67969 | ADF maintenance kit - Includes the ADF paper pick-up roller assembly and the separation pad assembly |
Memory (DIMM) | Q3931-67902 | 128MB, 167MHZ, 200-pin DDR DIMM memory module |
Memory (DIMM) | Q3931-67903 | 256MB, 167MHZ, 200-pin DDR DIMM memory module |
Memory (DIMM) | Q3931-67904 | 512MB, 167MHZ, 200-pin DDR DIMM memory module |
Motor | RM1-3286-000CN | Drum motor (M15) assembly - Drives the photosensitive drum and the primary charging roller in the black imaging drum |
Motor | 4G3-0769-000CN | Ejection stack motor (M32) assembly |
Motor | RM1-4519-000CN | Fuser DC motor (M11) assembly - Drives the fuser roller, the delivery roller, and the fuser pressure roller |
Motor | RK2-1320-000CN | Intermediate paper transfer unit (IPTU) media feed motor (M201) |
Motor | RM1-4175-000CN | Paper-feeder motor assembly - Include motor (M31) |
Motor | FM2-1409-000CN | Press motor (M36) assembly |
Motor | FM2-0737-000CN | Saddle motor assembly - Includes primary transfer roller disengagement motor(M9) and motor mount |
Motor | Q3938-67908 | Scanner motor - Drives the optical carriage assembly |
Motor | RK2-1331-000CN | Stepping motor (M1) - Main drive motor for the printer |
Motor | 4K1-1103-000CN | Stepping motor (M5) connector (J113) |
Mount | FM2-1639-000CN | Delivery switch mount assembly |
Mount | RM1-4128-000CN | Lattice cable mount assembly |
Overlay | Q3938-60129 | Control panel overlay - Snaps on top of the control panel assembly (Arabic) |
Overlay | Q3938-60120 | Control panel overlay - Snaps on top of the control panel assembly (Czech) |
Overlay | Q3938-60117 | Control panel overlay - Snaps on top of the control panel assembly (Danish) |
Overlay | Q3938-60112 | Control panel overlay - Snaps on top of the control panel assembly (Dutch) |
Overlay | Q3938-60107 | Control panel overlay - Snaps on top of the control panel assembly (English) |
Overlay | Q3938-60116 | Control panel overlay - Snaps on top of the control panel assembly (Finnish) |
Overlay | Q3938-60108 | Control panel overlay - Snaps on top of the control panel assembly (French) |
Overlay | Q3938-60110 | Control panel overlay - Snaps on top of the control panel assembly (German) |
Overlay | Q3938-60128 | Control panel overlay - Snaps on top of the control panel assembly (Greek) |
Overlay | Q3938-60127 | Control panel overlay - Snaps on top of the control panel assembly (Hebrew) |
Overlay | Q3938-60121 | Control panel overlay - Snaps on top of the control panel assembly (Hungarian) |
Overlay | Q3938-60109 | Control panel overlay - Snaps on top of the control panel assembly (Italian) |
Overlay | Q3938-60125 | Control panel overlay - Snaps on top of the control panel assembly (Japanese) |
Overlay | Q3938-60124 | Control panel overlay - Snaps on top of the control panel assembly (Korean) |
Overlay | Q3938-60114 | Control panel overlay - Snaps on top of the control panel assembly (Norwegian) |
Overlay | Q3938-60118 | Control panel overlay - Snaps on top of the control panel assembly (Polish) |
Overlay | Q3938-60113 | Control panel overlay - Snaps on top of the control panel assembly (Portuguese) |
Overlay | Q3938-60119 | Control panel overlay - Snaps on top of the control panel assembly (Russian) |
Overlay | Q3938-60111 | Control panel overlay - Snaps on top of the control panel assembly (Spanish) |
Overlay | Q3938-60115 | Control panel overlay - Snaps on top of the control panel assembly (Swedish) |
Overlay | Q3938-60130 | Control panel overlay - Snaps on top of the control panel assembly (Thai) |
Overlay | Q3938-60156 | Control panel overlay - Snaps on top of the control panel assembly (Traditional Chinese) |
Overlay | Q3938-60155 | Control panel overlay - Snaps on top of the control panel assembly (Traditional Chinese/Taiwanese) |
Overlay | Q3938-60126 | Control panel overlay - Snaps on top of the control panel assembly (Turkish) |
Pad | Q3938-67949 | ADF separation pad assembly - Helps separate paper in the ADF |
PC Board | RM1-3569-000CN | 1 x 500-sheet input tray paper feed PCA assembly |
PC Board | Q3938-67940 | Copy processor board (CPB) |
PC Board | RM1-6642-080CN | DC controller PC board assembly - Mounts on the rear of the print engine frame on the right side of the formatter board |
PC Board | Q3938-67982 | Formatter (main logic) board - For HP Color Laserjet CM6040 series |
PC Board | Q7542-60003 | Formatter (main logic) board - For HP Color Laserjet CM6040 series |
PC Board | RM1-3582-000CN | High voltage transfer PC board assembly |
PC Board | RM1-5475-000CN | High voltage transfer PC board assembly |
PC Board | RM1-3559-000CN | Intermediate paper transfer unit (IPTU) driver PCA assembly |
PC Board | RM1-4141-000CN | LED PCA assembly - Located on the stapler/stacker unit rear cover |
PC Board | RM1-4139-000CN | Main controller PCA assembly - For the stapler/stacker and booklet maker unit |
PC Board | RM1-3585-000CN | Memory tag PCA assembly |
PC Board | Q7829-67903 | PCA motor assembly |
PC Board | RM1-4140-000CN | Saddle controller PCA assembly |
PC Board | CE664-69005 | Scanner controller-board (SCB) assembly - Provides timing and control for the flatbed scanner |
PC Board | Q3938-67941 | SCUID board - Located on the havic assembly |
PC Board | FG3-2887-000CN | Tray driver PCA assembly |
PC Board (Modem) | Q3701-60020 | Modem PCA - HP LaserJet analog fax accessory 300 |
PC Board (Modem) | Q3701-60021 | Modem PCA - HP LaserJet analog fax accessory 300 |
Pickup Assembly | RM1-3533-000CN | 1 x 500-sheet input tray paper pick-up assembly |
Pickup Assembly | RM1-3345-110CN | Multi-purpose/tray 1 paper pick-up assembly |
Pickup Assembly | RM1-3206-000CN | Paper cassette pick-up assembly - Includes one pick roller and tow feed rollers |
Pin | XD9-0240-000CN | Dowel pin |
Pin | XD3-2300-202CN | Dowel pin - Locate next to the 50-tooth gear |
Pin | XD3-2300-142CN | Dowel pin - Located next to the 17-tooth gear on the output bin 2 |
Pin | Q3938-67903 | Large pin assembly |
Pin | Q3938-67904 | Small pin assembly |
Plate | RM1-3238-000CN | Cyan partition plate assembly |
Plate | FC5-6978-000CN | Front option tray plate |
Plate | 4G3-0671-000CN | Inner side plate assembly - Used on the booklet market series only |
Plate | RM1-3237-000CN | Magenta partition plate assembly |
Plate | RM1-3354-000CN | Rear mount cover plate assembly |
Plate | 4A3-4715-000CN | Stop hinge plate - Used only for booklet maker series |
Plate | RM1-3235-000CN | Yellow partition plate assembly |
Power Supply | RM1-3594-000CN | Low voltage power supply assembly |
Pressure Assembly | FM2-0730-000CN | Pressure roller assembly - For the stapler/stacker and booklet-maker |
Pulley | FU5-3086-000CN | 20-tooth pulley |
Pulley | FS5-3577-000CN | 39-tooth pulley - Runs on the woodruff roller - Located next to the roller flag |
Pulley | Q3938-67909 | Scanner pulley assembly - For transmission timing belt |
Rack Slide | FB3-7967-000CN | Front rack slide - Mounts on the front saddle side plate |
Rail | RL1-1311-000CN | Paper cassette tray left rail |
Rail | FC5-5436-000CN | Rail rack - Mounts on the finisher main body - Four used |
Rail | RC1-9231-000CN | Roller rail - Attaches to the left cassette rail |
Reversing Unit | RM1-3652-000CN | Reversing assembly for duplexer assembly |
Ring | XD2-3100-152CN | C-type external retainer ring |
Rod | Q3938-67911 | Scanner rod - Shaft that the scanner carriage assembly rides on |
Roller | RC1-8567-000CN | Multi-purpose paper pick-up roller |
Roller | Q7829-67940 | Paper feed roller assembly - Includes four feed serparation rollers |
Roller | RM1-0037-020CN | Paper feed/separation roller assembly - Gray rubber roller on a blue plastic cylinder |
Roller | Q3931-67938 | Paper pick-up roller assembly - Includes four paper pick-up rollers, and eight paper feed rollers - Use with tray 2,3,4, and 5 |
Roller | RL1-1206-000CN | Pick-up roller - Located on the on the paper pick-up plate assembly |
Roller | Q7829-67924 | Pickup roller high capacity input (HCI) - Attached to the pickup arm - Presses down the paper stack surface to feed the paper one sheet at a time (white) |
Roller | RM1-4392-000CN | Retard roller - Mounts on the multi-purpose roller assembly next to the limiter torque |
Roller Assembly | CB459A | 2nd transfer roller assembly - For the laserjet CP6015 and CM6030/6040 series |
Roller Assembly | RM1-3319-000CN | Second transfer-roller assembly |
Roller Kit | 5851-3941 | Roller kit - Includes the paper pick-up roller and the paper feed/separation roller assembly |
Saddle | RM1-4178-000CN | Saddle stapler assembly |
Scanner | CE664-69004 | Flatbed Scanner assembly - Includes (SCB) System Control Board - Does not include power supply, boards, and cable |
Scanner | CE664-69008 | Flatbed Scanner assembly - Includes (SCB) System Control Board - Does not include power supply, boards, and cable |
Scanner | Q3938-67972 | Optical scanner assembly - Includes carriage assembly and inverter assembly |
Screw | XA9-1801-000CN | M13x12 RS screw - Used to secure metal to metal |
Screw | XA9-1500-000CN | M3 pan-head Phillips screw with flat washer - 8mm long |
Screw | XA9-1449-000CN | M3 pan-head Phillips screw with machine threads - 8mm long |
Screw | 0515-4679 | M3 pan-head phillips screw with washer - 6mm long |
Screw | XA9-1504-000CN | M3 truss head (flanged) screw - 8mm long |
Screw | XA9-1469-000CN | M3 X 10mm machine screw with attached washer - Used to hold plastic to metal |
Screw | FU5-9059-000CN | M3 X 6mm machine thread screw with attached washer - Used to secure metal to metal |
Screw | XA9-1386-000CN | M3 X 8mm long self threading screw with captured washer |
Screw | XB1-2300-407CN | M3x4 machined truss-head screw |
Screw | XB2-8300-607CN | M3x6 screw with washer |
Screw | XB4-7401-005CN | M4 pan-head phillips screw with self-tapping threads - 10mm long |
Screw | XA9-1422-000CN | M4 X 12mm machine screw with washer |
Screw | XB4-7401-006CN | M4x10 tapping pan-head screw |
Screw | XB6-7303-005CN | Machine screw - M3, 30mm long with self-tapping threads - Typically used to hold metal to plastic |
Screw | XA9-0912-000CN | Machine screw with captured washer - M5 X 12 - Typically used to secure plastic parts to metal |
Screw | XB4-7300-605CN | Screw - 6 mm Phillips head screw with attached washer |
Screw | XA9-1159-000CN | Screw - M3 x 6 truss head - To hold sheet metal to sheet metal |
Screw | XA9-1448-000CN | Screw - M4 X 8mm long |
Screw | 3030-1103 | Screw socket head cap (black) 6,32mm 0.25 inch long |
Screw | RS5-9099-000CN | Stepped screw - Larger shoulder screw used to fasten the left side cover to the frame of the 2,000-sheet paper feeder assembly (two used) |
Screw | XA9-1495-000CN | Wafer head machine screw - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal |
Sensor | Q7829-67914 | ADF photo interrupter sensor with connector |
Sensor | RM1-4107-000CN | Area sensor flag assembly - Includes flag area sensor plate - Located on the finisher main body |
Sensor | RM1-3258-000CN | Color plane registration sensor assembly |
Sensor | WG8-5935-000CN | Fuser output sensor (SR5) |
Sensor | RM1-3570-000CN | Option paper sensor PCA assembly |
Sensor | FM2-1708-000CN | Option sensor assembly - Includes the photo interrupter (TLP1424) and bracket |
Sensor | 4G3-1624-000CN | Paper face sensing assembly - Located on the upper height panel |
Sensor | 4G3-0934-000CN | Paper face sensor assembly |
Sensor | FC5-5004-000CN | Paper sensing sensor flag - Mounts on the lower height panel |
Sensor | FM2-0707-000CN | Paper sensor assembly - Includes the paper sensor arm, photo interrupter (PI42), and paper sensor plate |
Sensor | RM1-3250-000CN | Photo sensor (SR26) assembly - Fuser home position sensor |
Sensor | WG8-5696-000CN | Photo-interrupter sensor assembly (Does not include the sensor flag) |
Sensor | FM2-0763-000CN | Rear end sensor assembly |
Sensor | Q3938-67907 | Scanner lid sensor assembly |
Sensor | FM2-1417-000CN | Sensor/switch assembly - Includes leaf spring, micro switch (MSW31), photo interrupter (PI32), and wire saddle |
Sensor | FM2-1401-000CN | Shutter sensor assembly |
Shaft | FM2-1423-000CN | Swing press shaft assembly |
Snap | 5851-2972 | Left hard disk rail snap |
Snap | 5851-2973 | Right hard disk rail snap |
Solenoid | Q7829-67915 | ADF solenoid |
Spring | RU5-2796-000CN | Tension spring - Provides tension to the paper sensing lever |
Spring | FS6-2582-000CN | Tension spring - Provides tension to the pressure plate assembly |
Spring | RU5-2822-000CN | Tension spring - Provides tension to the scanner assembly |
Spring | FC5-6857-000CN | Torsion spring |
Spring | RU5-2825-000CN | Torsion spring - Located on the back of the scanner assembly |
Stapler/Stacker | FM2-0721-000CN | Staple assembly - For stapler/stacker and booklet-maker unit |
Stapler/Stacker | FL2-0846-000CN | Stapler unit - Located on the saddle stapler assembly |
Stop | RC1-9882-000CN | Right door stopper |
Switch | FM2-0710-000CN | Approach switch assembly - Includes approach switch plate and microswitch (MS33) |
Switch | WC2-5512-000CN | Door open detection switch (SW103) |
Thermistor | RK2-1363-000CN | Thermistor unit - Monitors the temperature inside the scanners |
Transfer Assembly | Q3938-68001 | Image transfer assembly |
Transport Module | CC516-69002 | Intermediate paper transport unit (IPTU) (whole unit) |
Tray | Q3938-67950 | ADF input paper tray assembly - Holds 50-sheets |
Tray | Q3938-67964 | Duplex switchback tray |
Tray | RM1-3340-000CN | Face down end tray assembly |
Tray | RM1-5949-000CN | Lower duplexing tray assembly - Attaches to the paper delivery cover |
Tray | RM1-4105-000CN | Lower stack tray assembly (output bin 2) - For the stapler/stacker and booklet maker series |
Tray | RM1-4102-000CN | Upper stack tray assembly (output bin 1) - For the booklet maker unit |
Tray Assembly | RM1-4113-000CN | Booklet-output bin (saddle tray assembly) - Includes sensor cable and photo interrupter (TLP1242) |
Tray Assembly | RM1-3341-000CN | Multi-purpose/tray 1 drop down door paper input tray assembly |
Tray Assembly | RM1-4125-000CN | Operation-tray assembly - Includes operational tray cable and photo interrupter (TLP1242) |
Tray Assembly | RM1-4104-000CN | Stack tray assembly - Includes front and rear extension tray guide, stack tray, and extension tray |
Tray Assembly | RM1-4101-020CN | Stapler/stacker tray - Upper tray assembly for the stapler/stacker (output bin 1) |
Tray Assembly | Q6998-67902 | Top output bin tray - Stack sub-tray assembly for the stapler/stacker unit |
Unknown Keyword | CB457A | HP Color LaserJet 110V Fuser Kit |