| Keyword |
Part Number |
Description |
|---|
| Bearing | Q6702-60497 | Diverter support bearings set - For the Scitex L65500/LX600 printer series |
| Bearing | Q6702-60477 | Drive roller support bearings set - For the Scitex L65500/LX600/LX800 printer series |
| Belt | Q6702-60445 | Printhead cleaner roll belt kit - Includes the belt |
| Belt | Q6702-60434 | Scan-axis impelling belt - For the Scitex L65500/LX600 printer series |
| Bezel | Q6702-60388 | Front panel bezel |
| Block | Q6702-60394 | Power fuse holder block - Holds power fuses |
| Bottle | Q6702-60685 | Printhead cleaner waste bottle |
| Box | Q6702-60511 | Aerosol removal box assembly - Includes fans |
| Box | Q6702-60499 | Carriage sensor box - For the Scitex L65500/LX600/LX800 printer series |
| Box | Q6702-60492 | Control box - For the OMAS and vacuum assemblies |
| Box | Q6702-60537 | Main electronics box |
| Box | Q6702-60454 | Star/triangle configuration box set |
| Box | Q6702-60557 | USB heating and curing communication box |
| Bushing | Q6702-60861 | Carriage front bushing service kit - Includes all the sub assembly |
| Button | Q6702-60406 | Electrical cabinet power button and light |
| Button | Q6702-60559 | Emergency stop button |
| Cabinet | Q6702-60408 | Electrical cabinet power light set |
| Cabinet | Q6702-60389 | Power cabinet - Includes all upper front of the electrical cabinet and cables - Does not include electrical box - For the Scitex L65500 printer series |
| Cable | Q6702-67029 | Double data trailing cable - Connects to Light Cyan, Light Magenta, Cyan, and Black - For the Scitex L65500/LX600 printer series |
| Cable | Q6704-67004 | Drying cable set - For the Scitex L65500/LX600 printer series |
| Cable | Q6702-60556 | Electrical cabinet to main interconnect cable |
| Cable | Q6702-60451 | Fan array cable - For the Scitex L65500/LX600 printer series |
| Cable | Q6702-60463 | Front top power cable kit - Includes the IR temperature sensor cable, E-stop to e-cabinet cable, long grounding cable, curing to e-cabinet cable, main interconnect to Vacuum/OMAS controller cable, main interconnect to heaters interconnect box |
| Cable | Q6702-60560 | Intermediate Ink Supply Station (ISS) data cable - Broken bag intermediate tank cables |
| Cable | Q6702-60562 | Main electronics box power cable |
| Cable | Q6702-60493 | Sensor cable (OMAS) - For the Scitex L65500/LX600/LX800 printer series |
| Cable | Q6702-67030 | Single data trailing cable - Connects to Yellow and Magenta - For the Scitex L65500/LX600 printer series |
| Cable Kit | Q6702-60565 | Back data cable kit - Includes the main interconnect to PPS data cables and the main interconnect to MI cables |
| Cable Kit | Q6702-60566 | Back power cable kit - Includes the following cables, vaccum power cable, main interconnect power near back cable, main interconnect power far cable, media drive motor cable, print mechanism to rear spindle system motor cable |
| Cable Kit | Q6702-60502 | Carriage cable kit - Includes two data cables and three power cables |
| Cable Kit | Q6702-60558 | Emergency stop cable kit - Includes emergency stop to electrical cabinet cable and the emergency stop cable |
| Cable Kit | Q6702-60543 | Front data bundle cables - Includes the vacuum control to pump cable, main interconnect to vacuum control PCA, top door switch, PPS cable, front spindle motor system cable, capping station remote controller PCA cable, far PPS data cable, front panel cable |
| Cable Kit | Q6702-60460 | Front power cable kit - Includes the main interconnect Power near front cable, print mechanism to front spindle system motor (PWM), and the PID controller to temperature sensor cable - For the Scitex L65500/LX600 printer series |
| Cable Kit | Q6702-60433 | Ink system cable kit - Includes the broken bag ink tank cable, ISM front bundle kit, ISM rear bundle kit |
| Cable Kit | Q6702-60563 | Main electronics box cable kit - Includes the following cables, print mechanism to engine PCI (A and B), HDD IDE, engine PCI to main interconnect, formatter to Main interconnect front panel, engine PCI to main interconnect encoders, power distribution |
| Cable Kit | Q6702-60567 | Printhead Cleaner (PHC) cable kit - Includes the following cables, PHC to main interconnect data , PHC to main interconnect power, PHC internal data, PHC internal power, advance motor to differential PCA encoder, linear to differential encoder PCA |
| Cable Kit | Q6702-60564 | Vaccuum pump cable kit - Power and Data cables |
| Cap | Q6703-67098 | Left side dual roll cap - For the Scitex L65500/LX600/LX800 printer series |
| Cap | Q6703-67097 | Right side dual roll gear cap - For the Scitex L65500/LX600/LX800 printer series |
| Carriage | Q6702-60498 | Carriage assembly - For the Scitex L65500/LX600/LX800 printer series |
| Cartridge | CC585A | HP LX600 3-liter Black Latex Scitex Ink Cartridge |
| Cartridge | CC586A | HP LX600 3-liter Cyan Latex Scitex Ink Cartridge |
| Cartridge | CC589A | HP LX600 3-liter Light Cyan Latex Scitex Ink Cartridge |
| Cartridge | CC590A | HP LX600 3-liter Light Magenta Latex Scitex Ink Cartridge |
| Cartridge | CC587A | HP LX600 3-liter Magenta Latex Scitex Ink Cartridge |
| Cartridge | CC588A | HP LX600 3-liter Yellow Latex Scitex Ink Cartridge |
| Chain | Q6702-60484 | Carriage chain assembly - Includes tubes, power and data cables - For the Scitex L65500/LX600 printer series |
| Chassis | Q6702-60449 | Printhead cleaner chassis assembly - Does not include the media advance motor, cleaner roll and rubber roll, cable kit, up/down motor, and tension belts |
| Chassis | Q6702-60412 | Service station chassis - For the Scitex L65500/LX600/LX800 printer series |
| Cleaner | Q6702-60683 | Printhead cleaner electrobrake - Includes small gear and shaft |
| Cleaner | Q6702-67019 | Printhead cleaner electrobrake - Includes small gear and shaft |
| Cleaner | Q6702-60442 | Printhead cleaner roll driver assembly |
| Cleaning Supplies | Q6702-60656 | Cleaning supplies - For the Designjet L65500 printer series |
| Connectivity Kit | Q6702-60687 | ISM Ink quick connector repair set - Includes the male and female connectors, ink tubes, and fittings |
| Connector | Q6702-60548 | Black ink cartridge connector set |
| Connector | Q6703-67078 | Black ink cartridge connector set |
| Connector | Q6702-60550 | Cyan ink cartridge connector set |
| Connector | Q6702-60409 | Electrical cabinet rail connector - With four different holders |
| Connector | Q6702-60553 | Light cyan ink cartridge connector set |
| Connector | Q6702-60552 | Light magenta ink cartridge connector set |
| Connector | Q6702-60551 | Magenta ink cartridge connector set |
| Connector | Q6702-60549 | Yellow ink cartridge connector set |
| Connector | Q6703-67079 | Yellow ink cartridge connector set |
| Controller | Q6702-60390 | Heating/curing temperature controller - Located within the electrical cabinet |
| Coupler | Q6702-60478 | Drive roller motor coupling - For the Scitex L65500/LX600/LX800 printer series |
| Cover | Q6702-60508 | Carriage lid assembly - For the Scitex L65500/LX600/LX800 printer series |
| Cover | Q6702-60503 | Carriage oiling foam retainer lid |
| Cover | Q6702-60522 | Central cover panel |
| Cover | Q6702-67016 | Curing cable cover set - Metal covers located at the top of the curing fans - For the Scitex L65500/LX600 printer series |
| Cover | Q6702-60523 | Left side front arc cover |
| Cover | Q6702-60524 | Left side rear arc cover |
| Cover | Q6702-60518 | Left side top cover |
| Cover | Q6702-60527 | Left side trims cover set |
| Cover | Q6702-60514 | Right cover slide door assembly - Includes the door wheels and support |
| Cover | Q6702-60517 | Right side cover lateral panel |
| Cover | Q6702-60516 | Right side cover rear panel assembly |
| Cover | Q6702-60515 | Right side cover window assembly - Includes lock |
| Cover | Q6702-60525 | Right side front Arc cover |
| Cover | Q6702-60526 | Right side rear Arc cover |
| Cover | Q6702-60513 | Right side top cover assembly |
| Cover | Q6702-60528 | Right side trims cover set |
| Cross-Brace | Q6702-60422 | Cross-brace assembly - Includes both left and right sides |
| Diverter | Q6702-60496 | Diverter assembly - For the Scitex L65500/LX600 printer series |
| Door | Q6702-67010 | Electrical cabinet left door - Includes the RCCB 40A - For the Scitex L65500 printer series |
| Drive | Q6703-67089 | Hard Drive Disk System - Includes firmware - For the Scitex LX600/LX800 printer series |
| Encoder | Q6702-60505 | Carriage encoder assembly (encoder reader) |
| Encoder | Q6702-60474 | Drive roller encoder disc - Includes the encoder PCA |
| Encoder | Q6703-67077 | Printhead cleaner rollers encoder - Includes a connector to be compatible with older versions |
| Encoder | Q6702-60436 | Scan-axis encoder system and support - Includes encoder strip and eight metal supports and screws For the Scitex L65500/LX600 printer series |
| Fan | Q6702-60452 | Curing system fan - For the Scitex L65500/LX600/LX800 printer series |
| Fan | Q6702-60405 | Electrical cabinet internal fan - Includes external guard and filter |
| Fan | Q6702-60555 | Electrical cabinet internal fan - Includes external guard and filter |
| Fan | Q6702-60533 | Formater CPU fan - For Scitex printers |
| Filter | Q6702-60399 | 3-phase line filter - For the Scitex L65500/LX600 printer series |
| Filter | Q6702-60400 | Single hase line filter - For the Scitex L65500/LX600/LX800 printer series |
| Foam | Q6703-67117 | Carriage oiling foams kit - Kit of two oily foams |
| Foam | Q6703-67084 | Ink collector (gutter platen) foam set - Includes a set of 8 foams |
| Foot | Q6702-60420 | Rubber foot - Part of the printer support |
| Front Panel | Q6702-60387 | Front panel set - For user interface |
| Fuse | Q6702-60554 | Electrical cabinet low power fuse set |
| Fuse | Q6702-60407 | Main power breaker - For the Scitex L65500/LX600 printer series |
| Fuse | Q6702-60820 | Power fuse 20A - For 3-phase three x 380-415VAC (voltage measured between phase) - Used in the Scitex L65500/LX600 printer series |
| Fuse | Q6702-60821 | Power Fuse 32A - For 3-phase 3 x 200-220VAC (voltage measured between phase) - Used in the Scitex L65500/LX600 printer series |
| Gear | Q6703-67064 | Differential dual roll gear |
| Gear | Q6703-67090 | Gears kit - Includes main gear connected to the two belts with the upper and lower clutch, axis of the electromechanical brake and four small gears (two types of inner hole, three with an oval shape and one with the round shape) |
| Gear | Q6702-60462 | Spindle gear and encup set |
| Hardware | Q6702-60455 | Curing safety thermostat - For the Scitex L65500/LX600 printer series |
| Hardware | Q6702-67005 | Heating safety thermostat - For the Scitex L65500/LX600 printer series |
| Hardware | Q6702-60427 | Ink system pressurization pump and relief valve |
| Hardware | Q6702-60432 | Intermediate tank set - Set of 12 tanks - The tubes and fittings are required to install this part |
| Hardware | Q6702-60464 | Pneumatic gun - For the Scitex L65500/LX600/LX800 printer series |
| Hardware | Q6702-60539 | Vacuum pump - For the Scitex L65500/LX600/LX800 printer series |
| Hardware Kit | Q6703-67086 | Dual roll rubber kit - For the Scitex L65500/LX600/LX800 printer series |
| Hardware Kit | Q6702-67013 | Grease kit - For the printhead cleaning rollers |
| Hardware Kit | Q6702-67031 | Officeabilty upgrade kit - Includes the front central transparent panel, PH cleaning roller access restriction and top right transparent door with locker - For the Designjet/Scitex L65500/LX600 printer series |
| Hardware Kit | Q6702-67012 | Printhead cleaner adjustment shims - To be used for the 4.7.3 calibration - Includes three shims |
| Hardware Kit | Q6702-60431 | Syringe ink system purge kit - Contains six empty bags, seven syringes with needles and tube, four orange setup printheads, and the intermediate quick connector |
| Hardware Kit | Q6703-67093 | Up time kit - Includes pen capping module, ink pressure sensor board, pinchwheel, carriage sensor box, interconnect board and printhead interconnect board, main interconnect board, ISM repair kit, power fuses, printhead cleaning roller gears kit, etc |
| Heater | Q6702-60457 | Print zone heating module assembly - Includes two resistors - For the Scitex L65500/LX600 printer series |
| Holder | Q6702-60410 | Electrical cabinet rail small fuse holder - With one type of holder |
| Holder | Q6703-67061 | Media edge holders - For the Scitex L65500/LX600/LX800 printer series |
| Hub | Q6703-67065 | Dual roll end hub - For the Scitex L65500/LX600/LX800 printer series |
| Interface | Q6702-60426 | Ink system LED interface board |
| Keyboard | 319603-001 | Battery for real-time clock (RTC) - 3.0V, 220mAh, lithium coin cell, 20mm diameter, 3.2mm height (CR2032) |
| Label Kit | Q6702-60860 | Labels kit - Includes all labels and the product label without the serial number printed |
| Latch | Q6702-60468 | Spindle latch type A - Can also be used as the back spindle support |
| Latch | Q6702-60469 | Spindle latch type B - Can also be used as the back spindle support |
| Maintenance Kit | Q6702-60546 | Grease kit - For the scan beam columns and carriage rails |
| Module | Q6702-60450 | Curing module assembly - Includes two additional resistors - For the Scitex L65500/LX600 printer series |
| Module | Q6702-60430 | ISM air circuit module - Bottle with cap, 0.6cm tubes and fittings |
| Module | Q6702-60429 | ISM ink circuit module |
| Module | Q6702-60418 | Printhead capping module - For the Scitex L65500/LX600/LX800 printer series |
| Module | Q6702-60441 | Printhead cleaning roller module - Includes shims |
| Monitor | Q6702-67027 | L1950g 19-inch LCD monitor |
| Motor | Q6702-60475 | Drive roller motor - For the Scitex L65500/LX600/LX800 printer series |
| Motor | Q6702-60487 | PPS motor assembly - For the Scitex L65500/LX600/LX800 printer series |
| Motor | Q6702-67020 | Printhead cleaner motor assembly - Includes the white main gear |
| Motor | Q6703-67074 | Scan-axis motor - With 3 ghm resistance - For the Scitex LX600/LX800 printer series |
| Motor | Q6702-60437 | Scan-axis motor assembly - For the Designjet L65500 printer series |
| Motor | Q6702-60414 | Service station motor - For the Scitex L65500/LX600/LX800 printer series |
| Motor | Q6702-60470 | Spindle motor - Includes encoder assembly - For the Designjet L65500 printer series |
| Mount | Q6702-67022 | Ink Pressure sensor mounts - Includes tubes, fittings, and metal support - Set of three - For the Scitex L65500/LX600 printer series |
| Mount | Q6702-60488 | PPS motor mount assembly (type L) |
| Mount | Q6702-60491 | PPS motor mount assembly (type R) |
| Panel | Q6702-60519 | Left side front panel |
| Panel | Q6702-60520 | Left side lateral panel |
| Panel | Q6702-60521 | Left side rear panel |
| PC Board | Q6702-60512 | Carriage interconnect board - For the Scitex L65500/LX600/LX800 printer series |
| PC Board | Q6702-60506 | Carriage printhead interconnect board |
| PC Board | Q6702-67006 | Formatter board - Includes microprocessor and memory module |
| PC Board | Q6702-60424 | Ink sensors PC board |
| PC Board | Q6702-60425 | Ink system main PC board |
| PC Board | Q6702-60535 | Lower engine PCI board - For Scitex printers |
| PC Board | Q6703-67107 | Main interconnect board - For Scitex printers |
| PC Board | Q6702-60486 | PPS remote controller board |
| PC Board | Q6702-60530 | Print mechanism PC board - Controls the funtion of the print mechanism |
| PC Board | Q6702-60417 | Remote service station controller board |
| PC Board | Q6702-60416 | Service station connnection board |
| PC Board | Q6702-60534 | Upper engine PCI board - For Scitex printers |
| Pen | Q6702-60501 | Pen pocket kit - For the Scitex L65500/LX600/LX800 printer series |
| Pinch Assembly | Q6702-60479 | Pinch assembly - For the Scitex L65500/LX600 printer series |
| Pinch Assembly | Q6703-67050 | Pinch assembly - For the Scitex L65500/LX600/LX800 printer series |
| Pinch Assembly | Q6702-67024 | Printhead cleaner roll pinch assembly |
| Pinchwheel | Q6702-60480 | Pinchwheel - For the Scitex L65500/LX600/LX800 printer series |
| Plate | Q6703-67068 | Front left side support spindle plate assembly - Includes latch type A - For the Scitex L65500/LX600/LX800 printer series |
| Plate | Q6702-60471 | Front left support spindle plate assembly - For the Designjet L65500 printer series |
| Plate | Q6702-60472 | Front right side drive spindle plate - Includes the two media output motors |
| Plate | Q6702-60466 | Rear left side support spindle plate - Includes latch type B |
| Plate | Q6702-60467 | Rear right side drive spindle plate - Includes type A latch - For the Designjet L65500 printer series |
| Platen | Q6703-67047 | Ink collector (gutter platen) - Includes one module and one foam |
| Platen | Q6702-60538 | Platen assembly - Provides printing surface for the carriage assembly |
| Platen | Q6702-60494 | Platen assembly (OMAS) - For the Scitex L65500/LX600/LX800 printer series |
| Power Cord | Q6702-60568 | Main power cords - Phase three and single phase external power cords - For the Designjet L65500/LX600 printer series |
| Power Cord | Q6702-60569 | PC and monitor power cords - For the Designjet L65500/LX600/LX800 printer series |
| Power Module | Q6702-60391 | Heating and curing power module |
| Power Supply | Q6702-60536 | Main power supply - For Scitex printers |
| Power Supply | Q6702-60395 | Secondary 24VAC power supply - Located within the electrical cabinet |
| Power Supply | Q6702-60396 | Secondary 42VAC power supply - For the Scitex L65500/LX600/LX800 printer series |
| Pressure Assembly | Q6702-60547 | Ink system pressurization pump |
| Primer | Q6702-60507 | Primer assembly - Includes latch and labels |
| Printhead | CC583A | HP LX600 Cyan and Black Scitex Printhead |
| Printhead | CC584A | HP LX600 Light Magenta and Light Cyan Scitex Printhead |
| Printhead | CC582A | HP LX600 Yellow and Magenta Scitex Printhead |
| Protector | Q6702-60858 | PH interconnect protection kit - Includes mylar and metal support |
| Recovery Kit | 5183-5269 | Ink system return kit (box and instructions) - For returning Scitex Latex ink cartridges |
| Recovery Kit | 5183-5268 | Ink system return kit (box and instructions) - For returning Scitex Latex printheads |
| Relay | Q6702-60397 | Safety relay - For the Scitex L65500/LX600/LX800 printer series |
| Repair Kit | Q6702-60453 | Curing module cable repair set - For the Scitex L65500/LX600 printer series |
| Repair Kit | Q6702-60561 | Intermediate tank broken bag repair kit - Includes one intermediate ink tank and one air tube that goes from the air bottle to the intermediate tank |
| Repair Kit | Q6702-60686 | ISM repair kit - Includes the electrovalve, two check valves, four way valves, tubes and fittings, tube cutter, six O rings for the ink pressure sensor, ink leak cable, connections |
| Repair Kit | Q6702-60485 | PPS cables set repair kit - For the Scitex L65500/LX600/LX800 printer series |
| Repair Kit | Q6702-60438 | Scan-axis motor cable repair kit - Includes data and power cables |
| Repair Kit | Q6702-60688 | TRS print head ink connectors repair kit - Includes fittings, eight cables, and FI towers |
| Repair Kit | Q6702-60689 | TRS repair kit - Includes two backflow valves, ink tubes, and all required fittings - Used to repair leaks in the TRS |
| Resistor | Q6702-60456 | Curing and heating resistor set - Set of three - For the Scitex L65500/LX600 printer series |
| Resistor | Q6702-60404 | Scan-axis brake motor resistor |
| Retainer | Q6702-60504 | Carriage oiling foam retainer and rear support set |
| Retainer | Q6702-60481 | Pinch system up retainer - For the Scitex L65500/LX600/LX800 printer series |
| Roller | Q6702-60473 | Drive roller assembly - For the Scitex L65500/LX600 printer series |
| Roller | Q6702-60476 | Drive roller transmission assembly |
| Roller | Q6702-60443 | Printhead cleaner roll rubber roller - Includes small plastic stars |
| Roller | Q6702-67014 | Printhead cleaner roll rubber roller - Includes small plastic stars |
| Roller | Q6702-60444 | Printhead cleaner roll rubber roller up/down assembly |
| Roller | Q6702-67018 | Printhead cleaner roll rubber roller up/down assembly - Includes shaft |
| Screw | Q6702-67009 | Cosmetic cover screws - These secure the side covers and metal supports - Eight units |
| Screw | Q6702-60489 | PPS screw assembly - For the Scitex L65500/LX600/LX800 printer series |
| Screw | Q6702-60419 | Service station screw assembly |
| Sensor | Q6702-60415 | Drop detectors - Set of three |
| Sensor | Q6702-60500 | Line sensor assembly - For the Scitex L65500/LX600/LX800 printer series |
| Sensor | Q6702-60483 | Pinch switch sensor assembly |
| Sensor | Q6702-60459 | Temperature sensor - For the Scitex L65500/LX600/LX800 printer series |
| Sensor | Q6702-60495 | Temperature sensor assembly (OMAS) - For the Scitex L65500/LX600/LX800 printer series |
| Shelf | Q6702-60440 | Scan-axis tube shelf - For the Scitex L65500/LX600 printer series |
| Shipping Material/Carton | Q6702-60839 | Return kit - Includes the shipping container and internal packaging - For the Designjet L65500/LX600 printer series |
| Spindle | Q6704-67001 | Dual roll spindle - Includes the dual roll cap left and the right dual roll gear cap - For the Designjet L65500 printer series |
| Spindle | Q6702-60461 | Spindle - Includes the air valve - For the Scitex L65500/LX600 printer series |
| Spindle | Q6702-67025 | Spindle air valve - For the Scitex L65500/LX600/LX800 printer series |
| Strip | Q6702-60435 | Scan-axis encoder strip - Includes encoder reader - For the Scitex L65500/LX600 printer series |
| Strip | Q6702-60413 | Service station encoder strip and sensor |
| Support | Q6702-60542 | Electrical cabinet support - Part of the printer support |
| Support | Q6702-60482 | Pinch support - For the Scitex L65500/LX600 printer series |
| Support | Q6702-60458 | Print zone system supports set |
| Support | Q6702-60448 | Printhead cleaner roll support core |
| Support | Q6702-67008 | Top left cover L-shaped metal supports - Includes six screws |
| Support | Q6702-67007 | Top right cover L-shaped metal supports - Four units, includes screws |
| Support | Q6702-60541 | Vaccuum pump support assembly |
| Switch | Q6702-60509 | Carriage lid switch - For the Scitex L65500/LX600/LX800 printer series |
| Switch | Q6702-60403 | Circuit breaker 10A (ACB-2) |
| Switch | Q6702-60402 | Circuit breaker 20A (ACB-1) |
| Switch | Q6702-60401 | Circuit breaker 40A (ACB-3) - For the Designjet L65500/LX600 printer series |
| Switch | Q6702-60411 | Main power switch - For the Scitex L65500/LX600 printer series |
| Switch | Q6702-60490 | PPS low switch - For the Designjet L65500/LX600/LX800 printer series |
| Switch | Q6702-60544 | ProCurve ethernet network switch - Contains the switch, power cord and two LAN cables for connecting the IPS and the printer - Located in the E-cabinet area |
| Tensioner | Q6702-60423 | Cross tensioners - Part of the printer support |
| Tensioner | Q6702-60439 | Scan-axis belt tensioner assembly |
| Tool | Q6703-67075 | Dual roll tool - Includes the screws and protection kit |
| Tool | Q6702-60690 | Ink system tubes cleaning tool - Includes special pump, one intermediate ink tank, one syringe, and one empty cartridge bag - Used to flush the ink system |
| Tower | Q6702-60510 | Carriage tower assembly - For the Scitex L65500/LX600/LX800 printer series |
| Tower | Q6703-67126 | FI towers kit - Contains six FI towers |
| Transformer | Q6702-60398 | Vacuum power transformer - Located within the electrical cabinet |
| Tray | Q6703-67113 | Ink supply cartridge support tray - For the Scitex L65500/LX600/LX800 printer series |
| Tube | Q6702-67011 | TRS dynamic tubes - For the Designjet L65500 printer series |
| Tube | Q6702-60540 | Vacuum tube assembly - Includes the rubber cone connectors for both ends |
| Wheel | Q6702-67017 | Front right sliding door wheel |
| Wheel | Q6702-60421 | Wheel assembly - Part of the printer support |