Keyword |
Part Number |
Description |
Arm | RC1-7244-000CN | Lock arm - Connects to cartridge door stop to protect the grounding bias contact pins |
Bushing | RC1-7443-000CN | Bushing - Located between the 25-tooth and 35-tooth gears on the tranfer drive side plate |
Bushing | RC1-7283-000CN | Bushing - Located on the gear plate next to the cam and the 133-tooth gear |
Bushing | RC1-7249-000CN | Support bushing - Axial support for top sensor flag - Two used |
Cable | RK2-1053-000CN | Flexible flat cable - 21 pin connector |
Cable | RK2-1055-000CN | Flexible flat cable - 23 pin connector |
Cable (Interface) | C2951A | IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
Cable (Interface) | 5063-1256 | IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long - Connects to HP Vectra and IBM PC/AT/XT compatibles (replacement for C2950A) |
Cam | RC1-7284-020CN | Cam - Located between large white 133-tooth gear and the bushing on the gear cover |
Cartridge | Q7516-67901 | Black toner cartridge - Prints approximately 12,000 pages per cartridge |
Clip | XD9-0233-000CN | Retaining E-ring |
Connector | VS1-7258-007CN | Drawer connector - Connector located on bottom of tray assembly frame on right side, which connects tray assemblies to each other |
Connector | RC1-7220-000CN | Grounding plate connector - Electrical connection for DC controller board cover |
Control Panel | RK2-1097-000CN | Control panel assembly - Includes the plastic shell and the control panel PC board - (Does NOT include overlays) - Mounts to the top right side of printer |
Control Panel | Q7543-00034 | HP LaserJet 5200 series control panel overlay (Hebrew) |
Cover | RC1-7803-000CN | 500 sheet feeder left side cover |
Cover | RM1-2899-000CN | 500 sheet feeder right side cover |
Cover | RC1-7808-000CN | 500-sheet feeder cassette assembly rear cover |
Cover | RC1-7265-000CN | Contact holder cover - Fuser bias contact cover |
Cover | RC1-7217-000CN | DC controller board cover on right side of printer |
Cover | RC1-7047-000CN | Delivery roller cover - Small plastic cover for each of the paper delivery rollers - Four used |
Cover | RC1-7754-010CN | Duplexer left cover - Dark plastic cover on left end of mechanical section of duplexer assembly |
Cover | RC1-7757-000CN | Duplexer rear cover - Dark plastic cover on back of mechanical section of duplexer assembly |
Cover | RC1-7755-000CN | Duplexer right cover - Dark plastic cover on right end of mechanical section of duplexer assembly |
Cover | RC1-7756-000CN | Duplexer top cover - Dark plastic cover on top of mechanical section of duplexer assembly |
Cover | RC1-7118-000CN | Dust cover - |
Cover | RC1-7192-000CN | Front cover for face down paper delivery assembly |
Cover | RC1-7020-000CN | Gear assembly cover - Cover for top of lower right gear assembly |
Cover | RC1-7052-000CN | Left front corner cover |
Cover | RC1-7804-000CN | Left front corner cover for 500 sheet paper tray assembly |
Cover | RC1-7051-000CN | Left side cover assembly |
Cover | RC1-7807-000CN | Lower frame cover - Lower front cover for 500 sheet feeder assembly |
Cover | RC1-7080-000CN | Paper sensor cover - Cover for paper sensor flag on 250 sheet paper cassette |
Cover | RC1-7174-000CN | Rear lower cover - Located under face-up delivery assembly |
Cover | RC1-7806-000CN | Right front cover - Right front corner cover of 500 sheet feeder assembly |
Cover | RC1-7210-000CN | Right side cover assembly |
Cover | RC1-7212-000CN | Right side front corner cover |
Cover | RC1-7211-000CN | Right side upper cover assembly - Has cooling fan vent opening |
Cover | RC1-7019-000CN | Right upper gear cover - Located next to the right lower cartridge giude |
Cover | RC1-7452-000CN | Shutter lever cover - Covers front of shutter lever |
Cover | RM1-2458-040CN | Toner cartridge door - Fold down door used when accessing the toner cartridge - Front top and front of printer cover |
Cover | RM1-2471-000CN | Top cover assembly - Has face-down paper output tray molded into it - Includes control panel buttons |
Cover | RM1-2470-000CN | Top front cover of printer - Toner cartridge access cover |
Diverter | RC1-7403-000CN | Swing plate - Diverter plate for simplex to duplex media path |
Drive (Product) | J6073A | High performance 20GB hard disk - Plugs in one of the Extended Input/Output (EIO) slots |
Drive (Product) | J6073G | High performance 20GB hard disk - Plugs in one of the Extended Input/Output (EIO) slots |
Drive Assembly | RM1-2891-000CN | Duplexer feed drive assembly - Gear and motor assembly located on right side under the plastic cover of the mechanical section |
Drive Assembly | RM1-2909-000CN | Feed drive assembly - Six gears mounted on a plate on right side of 500 sheet paper feeder assembly |
Drive Assembly | RM1-2912-030CN | Lifter drive assembly - For 500 sheet feeder |
Duplexer | Q7549-67901 | LaserJet 5200 series Duplexer assembly |
Fan | RK2-1091-000CN | Cooling fan - Fan located on upper left side of printer |
Fan | RK2-1067-000CN | Duplexer fan - Cooling fan inside plastic cover of mechanical section of duplexer assembly |
Fan | RK2-1089-000CN | Low voltage power supply cooling fan - Located on upper right side of printer above low voltage power supply |
Flag | RC1-7770-000CN | Duplexer paper sensor flag - Black plastic tab located between the two large metal plates of the paper feed path of duplexer assembly - Two used |
Flag | RC1-7462-000CN | Face down flag - |
Flag | RC1-7261-000CN | Paper sensor flag - Leading edge paper sensor flag |
Flag | RC1-7410-000CN | Paper sensor flag for Tray 2 paper pickup assembly - Located on paper pickup roller shaft |
Flag | RC1-7460-020CN | Paper sensor flag in face down paper delivery assembly |
Flag | RC1-7877-000CN | Paper size sensor flag for Tray 3 |
Flag | RC1-7836-000CN | Sensor flag - Top of paper sensor flag for 500 sheet feeder assembly |
Flag | RC1-7459-020CN | Tray full sensor flag for face down paper output tray |
Fusing Assembly | RM1-2522-070CN | Fusing assembly - For 110 VAC to 120 VAC operation - Bonds the toner to the paper with heat |
Fusing Assembly | RM1-2524BULK48 | Fusing Assembly - For 220 VAC - Bonds toner to paper with heat |
Fusing Assembly | RM1-2524-070CN | Fusing assembly - For 220 VAC operation - Bonds toner to paper with heat |
Gear | RU5-0546-020CN | 133-tooth gear - Big gear that is located on the gear plate |
Gear | RU5-0553-000CN | 15-tooth gear |
Gear | RU5-0537-000CN | 25-tooth gear |
Gear | RU5-0551-000CN | 26-tooth gear - Located on the gear plate - Snaps in to the 43-tooth gear |
Gear | RU5-0575-000CN | 33/19-tooth gear - Have 33-tooth on the inside and 19-tooth on the outside |
Gear | RU5-0539-000CN | 33-tooth gear |
Gear | RU5-0538-000CN | 35-tooth gear |
Gear | RU5-0576-000CN | 36/17-tooth gear - Have 36-tooth on the inside and 17-tooth on the outside |
Gear | RU5-0574-020CN | 37/16-tooth gear - Have 37-tooth on the inside and 16-tooth on the outside |
Gear | RU5-0549-000CN | 40/99 tooth gear - Have 40-tooth on the inside and 99-tooth on the outside - Located on the gear plate |
Gear | RU5-0550-000CN | 43-tooth gear - Located on the gear plate |
Gear | RU5-0548-000CN | 52/96 tooth gear - Have 52-tooth on the inside and 96-tooth on the outside - Located on the gear plate |
Gear | RU5-0573-000CN | 65-tooth gear |
Gear | RU5-0547-000CN | 73-tooth gear - Located on the gear plate |
Gear | RU5-0536-000CN | Drive gear - 13 tooth gear that attaches to left side of transfer roller |
Gear Assembly | RM1-2474-000CN | Gear assembly - Paper pickup roller gear assembly |
Gear Assembly | RM1-2460-020CN | Paper pick-up roller gear asembly |
Ground Plane | RC1-7021-000CN | Grounding plate - Provides grounding for the photo interrupter |
Guide | RC1-7121-000CN | Cartridge guide - Front left side toner cartridge guide |
Guide | RC1-7286-000CN | Cartridge guide - Lower right side toner cartridge guide |
Guide | RC1-7287-000CN | Cartridge guide - Upper right side toner cartridge guide |
Guide | RC1-7022-000CN | Door stop guide - Cartridge door stop guide - Allows the cartridge door to open to maximum open position - Supports cartridge door stopper on left side |
Guide | RC1-7379-000CN | Left side duplexer assembly guide - Guide for duplexer assembly to slide in and out of printer |
Guide | RC1-7380-000CN | Right side duplexer assembly guide - Guide for duplexer assembly to slide in and out of printer |
Holder | RC1-7241-000CN | Contact holder - Holds fuser bias contacts |
Holder | RC1-7128-000CN | Contact holder - Holds the bias contact for fuser grounding |
Holder | RC1-7760-000CN | Duplexer fan holder - Cooling fan housing inside plastic cover of mechanical section of duplexer assembly |
Holder | RC1-7169-000CN | Fan holder - Mount for fan on left side of printer |
Holder | RC1-7434-000CN | Fan housing - Housing mount and duct for low voltage power supply fan |
Holder | RC1-7268-000CN | Sensor holder - Media leading edge sensor holder |
Interface (Product) | J6035D | HP JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port |
Interface (Product) | J6035G | HP JetDirect 175XExternal Print Server - Includes setup poster, software, folding sleeve for storing the poster and CD, power adapter and 2-foot USB cable |
Interface (Product) | J7934G | HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM |
Interface (Product) | J7960G | HP Jetdirect 625n internal ethernet print server - Provides 10BaseT, 100BaseTX, or 1000BaseT interface for products with an EIO port |
Interface (Product) | J7961G | HP Jetdirect 635n IPv6/IPsec Print Server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM |
Interface (Product) | J7942A | HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module |
Interface (Product) | J7942G | HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module |
Interface (Product) | J7951G | HP Jetdirect ew2400 802.11g wireless print server module - Includes power supply, USB cable, LAN/Ethernet cable, setup documentation and software |
Key | RC1-7405-000CN | Release arm - Fuser release arm - Provides mechanical link between fuser release lever and cartridge door |
Laser/Scanner | RM1-2555-020CN | Laser/Scanner assembly - Mounts on the support structue in the print engine frame assembly |
Lever | RC1-7285-000CN | Coupling lever - Lever arm that couples the drive gear to the toner cartridge |
Lever | RC1-7406-000CN | Release lever - Fuser release lever on left side of printer |
Lever | RC1-7408-000CN | Release lever - Paper release lever for delivery roller assembly - Upper left side of printer |
Lever | RC1-7451-000CN | Shutter lever - Connects to laser shutter |
Light Pipe | RK2-1069-000CN | Light guide module - Provides light source used by sensors in duplexer assembly |
Link | RC1-7289-000CN | Tag link - This is an arm extension for a mechanical movement - It allows the printer to read the toner cartridge supplies status |
Link | RC1-7294-000CN | Tag link lock - An arm extension for a mechanical movement - Allows the printer to read the toner cartridge supplies status |
Manual | Q7543-90935 | LaserJet 5200 series service manual - Printed version (English) |
Memory (DIMM) | Q7718A | 128MB, 100-pin, DDR DIMM |
Memory (DIMM) | Q7718-67951 | 128MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (DIMM) | Q7719-67951 | 256MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (DIMM) | Q7719A | 256MB, 100-pin, DDR DIMM |
Memory (DIMM) | Q7713-67951 | 32MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (DIMM) | Q7714-67951 | 48MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (DIMM) | Q7720-67951 | 512MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Memory (DIMM) | Q7715-67951 | 64MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
Motor | RK2-1062-000CN | DC stepper motor - Provides power for mechanical movement parts in 500 sheet feeder assembly - Located on right side of feeder assembly |
Motor | RM1-2538-000CN | Fusing assembly drive motor |
Motor | RM1-2516-000CN | Main motor - Drives gears in main drive assembly |
Overlay | Q7543-00033 | HP LaserJet 5200 series control panel overlay (Greek) |
Overlay | Q7543-60107 | HP LaserJet 5200 series control panel overlay (Spanish, Portuguese and Italian) |
Overlay | Q7543-00026 | LaserJet 5200 control panel overlay (Arabic) |
Overlay | Q7543-00028 | LaserJet 5200 control panel overlay (Danish) |
Overlay | Q7543-60108 | LaserJet 5200 control panel overlay (German, French and Netherlands) |
Overlay | Q7543-00041 | LaserJet 5200 control panel overlay (Russian) |
Overlay | Q7543-00047 | LaserJet 5200 control panel overlay (Turkish) |
Overlay | Q7543-60110 | LaserJet 5200 series control panel overlay (Czech, Hungarian and Polish) |
Overlay | Q7543-60109 | LaserJet 5200 series control panel overlay (Finnish, Norwegian, Swedish, |
Overlay | Q7543-60114 | LaserJet 5200 series control panel overlay (French, German and Italian) |
Pad | RM1-2546-000CN | Separation pad assembly - For Tray 2 - Includes pad holder and separation pad |
Pad | Q7829-67927 | Separation pad for multipurpose/tray 1 assembly |
Paper | HPBC11 | HP Business Copy Paper - A size (8.5 x 11-inches) - 500 sheets |
Paper | HPJ1424 | HP LaserJet Paper - 21.6cm (8.5in) x 35.5cm (14in) - 500 sheets |
Paper | HPM1120 | HP Multipurpose Paper - A size (8.5 x 11-inches) - 500 sheets |
Paper | HPM1720 | HP Multipurpose Paper - B size (11 x 17-inches) - 500 Sheets per package |
Paper | HPM1420 | HP Multipurpose Paper - Legal size (8.5 x 14 inches) - 500 sheets |
Paper | HPC1117 | HP Office Paper - B size (11 x 17-inches) - 500 Sheets per package |
Paper (Glossy) | Q2546A | HP Color Laser Glossy Presentation Paper - A size (8.5 x 11-inches) - 300 sheets |
Paper (Glossy) | Q6541A | HP Color Laser Soft-gloss Presentation Paper - A size (8.5 x 11-inches) - 200 sheets |
Paper (Glossy) | Q6542A | HP Professional Laser Soft-gloss Paper - A4 size (21.0cm x 29.7cm) - 200 sheets |
Paper Feeder | RM1-2482-020CN | Paper feed guide assembly - Support structure that to guides the paper into the fusing assembly - Ribbed plastic frame with metal guide plate |
PC Board | RM1-4291-020CN | Duplexer controller PCA - Controller PCA located on left side under the plastic cover of mechanical section of duplexer assembly |
PC Board | Q6498-67902 | Formatter board (main logic) PCA assembly - For laserjet 5200 N/TN and DTN models only |
PC Board | Q6498-69006 | Formatter board (main logic) PCA assembly - For laserjet 5200 N/TN and DTN models only |
PC Board | Q6497-69005 | Formatter board main logic PCA - Base unit model only |
PC Board | RM1-2957-020CN | High voltage power supply PC board - 110-127VAC input voltage |
PC Board | RM1-2657-000CN | Paper feeder driver PCA - Located on right side of 500-sheet paper feeder assembly |
Pickup Assembly | RM1-2896-000CN | 500-sheet feeder paper pick-up assembly |
Pickup Assembly | RM1-2530-000CN | Paper pickup assembly for 250 sheet Tray 2 paper cassette - Includes the base structure with the paper pickup roller, paper feed roller, drive gears, and paper sensors |
Plate | RC1-7264-000CN | Cross member auxiliary plate |
Plate | RL1-0951-000CN | Gear support plate - Holds 133-tooth gear, 73-tooth gear, 96/52-tooth gear, 99/40-tooth gear, 43-tooth gear, and 26-tooth gear |
Power Supply | RM1-2958-020CN | High voltage power supply PCA assembly - For 220/240 VAC input voltage |
Power Supply | RM1-2926-030CN | Low voltage power supply PC Board - 100/127VAC 60Hz |
Power Supply | RM1-2951-030CN | Low voltage power supply PC Board - 220-240VAC, 50Hz |
Rod | RC1-7226-000CN | Power switch rod - Mechanical link between power switch on printer and DC controller board |
Roller | RC1-7783-000CN | Duplexer paper feed roller - Front roller of the two feed rollers inside plastic cover of mechanical section of duplexer assembly |
Roller | RC1-7790-000CN | Duplexer paper feed roller - Rear roller of the two feed rollers inside plastic cover of mechanical section of duplexer assembly |
Roller | Q7829-67925 | Feed roller high capacity input (HCI) - Transmit the paper from the cassette and feeds it to the device entrance (blue) |
Roller | RM1-0037-020CN | Paper feed/separation roller assembly - Gray rubber roller on a blue plastic cylinder |
Roller | RM1-0036-020CN | Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24-tooth white gear on one side |
Roller | Q7829-67926 | Paper pickup roller - MP/Tray 1 paper pickup roller |
Roller | Q7829-67928 | Transfer roller assembly - Long metal shaft with Black roller and drive gear - Transfers static charge to the media being printed on |
Roller Assembly | RM1-2490-010CN | Face down top output bin delivery roller assembly - Includes all rollers and holders in assembly |
Roller Assembly | RM1-0731-050CN | Paper pickup roller assembly - Includes the D shaped rubber roller on a plastic shaft - Mounts in the lower center of the center frame assembly |
Roller Assembly | RM1-3001-000CN | Registration roller assembly - Includes the roller, bushings, mounting plate, transfer upper guide, left and right registration side plate, registration roller shaft, and upper transfer sheet guide |
Screw | XA9-1503-000CN | M3 truss head (Flanged) phillips screw (Black oxide finish) - 6mm long |
Screw | XA9-1420-000CN | M3 X 8mm pan head phillips screw with captive flat and split-lock washers |
Screw | XB4-7401-005CN | M4 pan-head phillips screw with self-tapping threads - 10mm long |
Screw | XA9-1670-000CN | Screw - M3 X 6mm |
Sensor | RC1-7144-000CN | Loop sensor flag - Tracks the paper tension during its movement in the paper path of the printer |
Sensor | WG8-5696-000CN | Photo-interrupter sensor assembly (Does not include the sensor flag) |
Sensor | WG8-5624-000CN | Photo-sensor (TLP1241) - Sensor flag activated |
Sensor | RM1-2897-000CN | Sensor assembly - Located on top right rear side of 500 sheet feeder paper pickup assembly |
Shutter | RC1-7163-000CN | Fusing shutter - Fuser shutter door - Closes when cartridge access door is opened |
Solenoid | RK2-0269-000CN | Paper pick-up solenoid |
Solenoid | RK2-1096-000CN | Solenoid - Located on right front side of printer chassis |
Spring | RU5-2061-000CN | Compression spring - |
Spring | RU5-2587-000CN | Compression spring - Electrical contact spring for toner cartridge |
Spring | RU5-2588-000CN | Compression spring - Electrical contact spring for toner cartridge |
Spring | RU5-2589-000CN | Compression spring - Electrical contact spring for toner cartridge |
Spring | RC1-7127-000CN | Compression spring - Fuser bias contact for fuser grounding |
Spring | RU5-2590-000CN | Compression spring - Located next to the arm lock |
Spring | RU5-2631-000CN | Compression spring - Located on the gear plate at the end of the 43-tooth gear |
Spring | RU5-2630-000CN | Compression spring - Provides pressure for gear pack at lever arm that couples the drive gear to the toner cartridge |
Spring | RU5-2553-000CN | Compression spring - Provides pressure for MP/Tray 1 separation pad assembly |
Spring | RU5-2633-000CN | Compression spring - Provides pressure for tag link |
Spring | RC1-7126-020CN | Compression spring - Used in the side plate inside the print engine |
Spring | RC1-7124-000CN | Grounding spring - Used inside the print engine |
Spring | RU5-2550-000CN | Tension spring - Provides tension for fuser release lever |
Spring | RU5-2591-000CN | Tension spring - Provides tension for fuser release lever |
Spring | RU5-2644-000CN | Tension spring - Provides tension for fuser swing arm |
Spring | RU5-2632-000CN | Tension spring - Provides tension for lever arm that couples the drive gear to the toner cartridge |
Spring | RC1-0198-000CN | Tension spring - Provides tension for lifter drive assembly |
Spring | RU5-2548-000CN | Tension spring - Provides tension for MP/Tray 1 separation pad assembly |
Spring | RU5-2651-000CN | Tension spring - Provides tension for shutter lever |
Spring | RU5-2563-000CN | Tension spring - Provides tension to the dust cover to retract back to its home position |
Spring | RC1-7123-000CN | Torsion spring - Located on the left cartrige guide - Spring that is used for the movement of the left cartridge guide |
Spring | RC1-7145-000CN | Torsion spring - Provides radial tension for loop sensor flag located on the high voltage power supply |
Spring | RU5-2584-000CN | Torsion spring - Provides tension for face down paper flag |
Spring | RU5-2596-000CN | Torsion spring - Provides tension for top sensor flag |
Spring | RC1-7125-000CN | Torsion spring - Provides torsion to the paddle of the left cartridge guide |
Stop | RC1-7023-000CN | Door stop - Cartridge door stop arm - Also connects to fuser release lever arm |
Stop | RC1-7288-000CN | Link stopper - Stop for lever arm that couples the drive gear to the toner cartridge |
Switch | RK2-1103-000CN | Paper tray cassette size switch |
Tray | RM1-2900-060CN | 500-sheet paper cassette tray 3 |
Tray | RM1-2463-020CN | Front cover of printer - Also drop down MP/Tray 1 paper input tray |
Tray Assembly | RM1-2479-060CN | 250-sheet paper cassette - For tray 2 assembly |
Tray Assembly | RM1-2492-000CN | Face-up output (delivery) tray assembly - Includes drop down paper output tray with the flip-out extender |
Tray Assembly | RM1-2465-000CN | Multi-purpose/Tray 1 paper input assembly |
Unknown Keyword | RC1-3090-000CN | Bushing stop - For the fuser lever - Located on the inside upper front part of the printer - Two used |