Keyword |
Part Number |
Description |
| RA0-1172-000CN | 17-tooth gear assembly - Includes the 17-tooth gear mounted on a black plastic lever/bracket - Mounts to the right side plate |
| RA0-1003-000CN | Rubber foot - For bottom of printer - Three used |
Arm | RC2-0575-000CN | Arm paper - Includes sensor |
Arm | RC1-4055-000CN | Door arm - White plastic arm that connects to left side cartridge access door |
Bushing | RC1-4081-000CN | Bushing |
Bushing | RC1-4189-000CN | Gear stopper - Small bushing between right side of registration assembly and registration roller drive gear |
Bushing | RC2-0701-000CN | Inner bushing - Rides on the large white 201-tooth drive gear |
Bushing | RC1-0922-000CN | Roller bushing - Right side transfer roller bushing |
Bushing | RC1-3665-000CN | Shaft bushing/retainer - Small plastic cylinder with four nubs that twist - Locks into the side frame |
Button | RC2-0631-000CN | Power on/off switch - Located on the front right side of the printer |
Cable | RM1-4060-000CN | Cable assembly - For tray 2 paper pickup sensor |
Cable | RM1-4053-000CN | Laser scanner motor cable - Connects ECU to scanner motor (M3) |
Cable | RM1-4062-000CN | Option input tray cable |
Cable (Interface) | C2951A | IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
Cable (Interface) | 5063-1256 | IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long - Connects to HP Vectra and IBM PC/AT/XT compatibles (replacement for C2950A) |
Cam | RC1-4114-000CN | Cam - Located between large white 201-tooth gear and drive release lever |
Cam | RC1-4137-020CN | Contact cam - Vertical piece that inserts into protective plate |
Cartridge | Q7551-67902 | Black toner cartridge - Prints approximately 13,000 pages per cartridge |
Cartridge | Q7551-67901 | Black toner cartridge - Prints approximately 6,500 pages per cartridge |
Cartridge | Q7551X | HP LaserJet 51X Black Print Cartridge with Smart Printing Technology |
Cartridge | Q7551A | HP LaserJet Q7551A Black Print Cartridge with Smart Printing Technology |
Clamp | WT2-5694-000CN | Snap-in cable clamp - Secures the drive motor cable from the controller PC board to the metal support pan |
Clip | WT2-5812-000CN | Cable clip - `C` shaped white plastic clip |
Clip | WT2-5678-000CN | Cable clip - White plastic push-in clip with mounting pin |
Connector | VS1-7257-007CN | Drawer connector - Connector located on top of tray assembly frame (right side), which connects tray assemblies to each other |
Contact | RM1-4054-000CN | Contacts and cable - For toner cartridge memory tag - Connects to ECU memory control |
Contact | RC1-4060-000CN | Grounding contact - Tiny U-shaped metal cartridge grounding contact - Contacts copper grounding strip on left side of toner cartridge |
Control Panel | RM1-3725-000CN | Control panel assembly - Includes the display mounted on the right top side of the printer |
Cover | RC1-4108-000CN | Cover for main motor M1 - Located on lower right side of printer |
Cover | RC2-0612-000CN | Engine controller cover - Vertical cover located on the right back side of the printer |
Cover | RC2-0627-000CN | Formatter cover - Mounts on the left back side of the printer |
Cover | RC2-0579-000CN | Gear cover - Mounts on the left side of the printer chassis |
Cover | RM1-3721-000CN | Left cover assembly |
Cover | RM1-3723-000CN | Multi-purpose input tray cover assembly - Includes pull-out and flip-out tray extensions |
Cover | RM1-3724-000CN | Rear cover assembly - Includes rear door assembly |
Cover | RC1-3936-020CN | Registration roller assembly cover |
Cover | RL1-1367-000CN | Right front cover - Vertical plastic cover - Mounts on the right front of the printer |
Cover | RC2-0603-000CN | Right lower cover - Horizontal plastic cover - Mounts on the right lower side of the printer |
Cover | RC2-0602-000CN | Right side cover - Located on the right side of the printer - Provides access to DIMMs |
Cover | RC2-0605-000CN | Right upper cover - Used to cover the top side of the formatter board |
Cover | RC2-0739-000CN | Sensor cable cover - Plastic cover that protects the face up sensor cable |
Cover | RM1-3720-020CN | Top cover assembly - Mounts on the top of the printer holds the paper when it is printed |
Door | RM1-3722-000CN | Cartridge access door assembly - Provides access to the cartridges |
Drive | 0950-4753 | 40GB SATA hard drive - 5,400 RPM, 2.5 inch form factor, 9.5mm height |
Drive | J7989G | Hard drive - High performance EIO serial ATA hard drive |
Drive | 5851-3833 | Hard drive kit - With both plastic side rails |
Drive Assembly | RM1-1522-020CN | Drive release assembly |
Drive Assembly | RM1-3712-000CN | Main drive assembly - Mounts on the right side of the printer - Metal plate with gears attached - Also known as main gear drive assembly |
Duct | RC2-0590-000CN | Cartridge duct - Small vent duct to route air from the fan (FM1) to the cartridge area |
Duct | RC1-4128-020CN | Plastic duct that vents air from the lower right front fan to the laser/scanner. |
Fan | RK2-1497-000CN | Cooling fan - Located on the right side of the printer |
Fan | RK2-1499-000CN | Cooling fan (FM2) - Located on the left side of the printer - Small fan that cools the fuser assembly and print cartridge area |
Feed Assembly | RM1-3759-000CN | Lower paper feed assembly - Vertical transfer unit - Transfers paper from pickup assembly up to the printer input |
Film (Transparency) | 92296T | LaserJet printer transparency film - A size (8.5 x 11-inches) - 50 sheets |
Film (Transparency) | 92296U | LaserJet printer transparency film - A4 size (21.0cm x 29.7cm) - 50 sheets |
Flag | RM1-3743-000CN | Face down flag assembly - Goes on the top cover assembly |
Flag | RM1-3742-000CN | Face down full detect flag assembly - Goes on the right side of the top cover assembly |
Flag | RM1-3769-000CN | Sensor flag assembly for tray 2 - Short rod with one flag on it - Mounts next to the pickup roller assembly |
Flag | RC1-4027-000CN | Sensor lever - Top of page sensor flag - Used to detect edge of paper |
Fusing Assembly | RM1-3740-000CN | Fusing assembly - Bonds toner to paper by heat - For 110VAC to 127VAC operation |
Fusing Assembly | RM1-3717-000CN | Fusing assembly - For 110-127 VAC - Bonds toner to paper by heat - Includes 20-tooth gear |
Fusing Assembly | RM1-3761-000CN | Fusing assembly - For 220 VAC to 240 VAC - Bonds toner to paper with heat - Includes 20-tooth gear |
Gear | RU5-0394-000CN | Gear - 12-tooth Gear - Goes on the drive release assembly |
Gear | RU5-0951-000CN | Gear - 16-tooth gear |
Gear | RU5-0958-000CN | Gear - 17/17 tooth - Goes on the fuser drive assembly |
Gear | RU5-0959-000CN | Gear - 19-tooth - Goes on the fuser drive assembly |
Gear | RU5-0950-000CN | Gear - 201-tooth gear |
Gear | RU5-0957-000CN | Gear - 20-tooth - Goes on the fuser drive assembly |
Gear | RU5-0366-000CN | Gear - 30-tooth - Attaches to right side end of tray 1 pickup roller shaft |
Gear | RU5-0960-000CN | Gear - 31-tooth gear |
Gear | RU5-0955-000CN | Gear - 42-tooth - Goes with the pendulum assembly |
Gear | RU5-0962-000CN | Gear - 65-tooth gear |
Gear | RM1-3714-000CN | Gear - Pick up roller gear assembly |
Gear | CB414-67923 | Replacement gear kit - Includes 17,17,19 and 20 tooth gears |
Gear Assembly | RM1-3748-000CN | Duplexing pendulum assembly - Gear assembly that transfers power from main motor to run duplexing capability |
Gear Assembly | RM1-3746-000CN | Fuser drive side plate and gear assembly - Drive gear assembly and mounting plate for fuser - Located on right side of printer |
Ground Strap | RC1-4085-000CN | Grounding plate - High voltage power supply grounding plate - Attaches to left rear of power supply |
Guide | RC2-0648-000CN | Air guide - Located next to the cartridge duct |
Guide | RC2-0704-000CN | Cartridge guide - Lower left side toner cartridge guide |
Guide | RC2-0700-000CN | Cartridge guide - Lower right side toner cartridge guide |
Guide | RC2-0492-000CN | Cartridge guide - Right side toner cartridge guide |
Guide | RC2-0703-000CN | Cartridge guide - Upper left side toner cartridge guide |
Guide | RC2-0566-000CN | Cassette guide - Left rear side cassette guide |
Guide | RC2-0565-000CN | Cassette guide - Left side guide for media cassette |
Guide | RC2-0560-000CN | Cassette guide - Right rear side cassette guide |
Guide | RC2-0559-000CN | Cassette guide - Right side guide for media cassette |
Guide | RC2-0567-000CN | Center guide - Left center guide plate |
Guide | RC1-4056-000CN | Door arm guide - White plastic guide for cartridge door lever |
Guide | RC1-3935-000CN | Feed guide assembly - Mounts above transfer roller assembly |
Guide | RC1-4096-000CN | Guide assembly - Duplexer portion paper input guide assembly |
Guide | RM1-3757-000CN | Lower transfer guide assembly - Guides paper into transfer roller |
Guide | RM1-3760-000CN | Paper feed guide assembly |
Guide | RC1-4083-000CN | Paper guide - Located under the registration roller assembly |
Guide | RM1-1506-000CN | Position guide assembly - Guides the paper along the right side duplex path - Attaches just above power supply |
Guide | RC2-0561-000CN | Right center side plate guide |
Hardware | RM1-4057-000CN | Cable harness - For paper delivery sensor and fuser thermistors |
Hinge | RC1-4057-000CN | Tray hinge - Left side hinge for drop down tray 1 assembly |
Hinge | RC1-4058-000CN | Tray hinge - Right side hinge for drop down tray 1 assembly |
Holder | RC2-0588-000CN | Cable holder - Mounts on the main drive assembly |
Holder | RC1-4127-000CN | E-label reader holder - Housing that holds cartridge E-label reader |
Holder | RC2-0622-000CN | Fan holder - Chassis left fan holder |
Holder | RC2-0595-000CN | Holder - Plastic assembly that holds interlock switch for cover |
Holder | RC2-0562-000CN | Holder - Plastic assembly that holds optional input connector |
Holder | RC2-0634-000CN | Link switch holder - Plastic guide that holds power link arm in place |
Holder | RC2-0592-000CN | Main fan holder - Plastic fan holder for main cooling fan (FM1) - Located on the upper right side of the printer |
Holder | RC1-4009-000CN | Plate holder - Holds the left rear corner of the paper access plate (duplex pan) |
Holder | RC1-4126-000CN | Reader holder cover - Plastic housing that covers cartridge E-label reader and holder assembly |
Holder | RC1-3937-000CN | Separation pad holder |
Holder | RC2-0632-000CN | Switch holder - Holds the power on/off switch |
Interface (Product) | J7934G | HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM |
Interface (Product) | J7960G | HP Jetdirect 625n internal ethernet print server - Provides 10BaseT, 100BaseTX, or 1000BaseT interface for products with an EIO port |
Interface (Product) | J7961G | HP Jetdirect 635n IPv6/IPsec Print Server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM |
Interface (Product) | J7942A | HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module |
Interface (Product) | J7942G | HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module |
Interface (Product) | J7951G | HP Jetdirect ew2400 802.11g wireless print server module - Includes power supply, USB cable, LAN/Ethernet cable, setup documentation and software |
Laser/Scanner | RM1-1521-030CN | Laser/Scanner assembly - Mounts on top of print structure |
Lever | RC2-0706-000CN | Cartridge clamp lever - Attaches to upper left toner cartridge guide - Provides mechanical lock for toner cartridge |
Lever | RC1-4115-000CN | Coupling lever - White plastic lever between large white gear cam and drive release assembly |
Lever | RC1-4116-000CN | Drive release lever |
Lever | RC2-0705-000CN | Drive release lever |
Lever | RC1-4065-000CN | Grounding contact lever - Lever on left side that is moved by contact when the toner cartridge is installed |
Lever | RC1-4066-020CN | Grounding contact lever - Lever on left side that pushes both contact springs against toner cartridge contacts on left side of cartridge |
Lever | RC1-3939-000CN | Paper sensor lever - Mechanical device that activates photo sensor (PS902) - For tray 1 |
Link | RC1-4117-000CN | Drive release link - |
Link | RC1-4125-000CN | Laser shutter link - Enables the laser scanner shutter by pressing up this link on the underside of the laser/scanner assembly |
Link | RC2-0633-000CN | Link switch - Metal arm that links power switch to power supply |
Memory (DIMM) | CB422-67951 | 128MB, 144-pin, DDR2 SDRAM DIMM memory module |
Memory (DIMM) | CB423-67951 | 256MB, 144-pin, DDR2 SDRAM DIMM memory module |
Memory (DIMM) | CB420-67951 | 32MB, 144-pin, DDR2 SDRAM DIMM memory module |
Memory (DIMM) | CB421-67951 | 64MB, 144-pin, DDR2 SDRAM DIMM memory module |
Memory (Product) | CB423A | 256MB, 144-pin, DDR2 SDRAM memory DIMM |
Memory (Product) | CB422A | HP 128MB, 144-pin, DDR2 SDRAM DIMM |
Memory (Product) | CB420A | HP 32MB, 144-pin, DDR2 SDRAM DIMM |
Memory (Product) | CB421A | HP 64MB, 144-pin, DDR2 SDRAM DIMM |
Motor | RK2-1488-000CN | Main motor (M1) - DC motor located on the upper left side of the printer |
Motor | RK2-1489-000CN | Stepping DC motor (M2) - Drives all fuser rollers and fuser drive assembly |
Pad | RM1-3738-000CN | Tray 1 and 2 separation pad and holder assembly |
Pad | RC1-0939-000CN | Tray 1 separation pad |
Paper | HPJ1424 | HP LaserJet Paper - 21.6cm (8.5in) x 35.5cm (14in) - 500 sheets |
Paper | HPJ1124 | HP LaserJet Paper - A size (8.5 x 11-inches) - 500 sheets |
Paper | HPM115R | HP Multipurpose Paper - A size (8.5 x 11-inches) - 5 reams |
Paper | HPM1120 | HP Multipurpose Paper - A size (8.5 x 11-inches) - 500 sheets |
Paper | HPM113H | HP Multipurpose Paper - A size (8.5 x 11-inches), 3 hole - 500 sheets |
Paper | HPM1420 | HP Multipurpose Paper - Legal size (8.5 x 14 inches) - 500 sheets |
Paper | HPC8511 | HP Office Paper - A size (8.5 x 11-inches) - 10 reams |
Paper | HPC3HP | HP Office Paper - A size (8.5 x 11-inches) - 3 hole - 10 reams |
Paper | HPC8514 | HP Office Paper - Legal size (8.5 x 14 inches) - 10 reams |
Paper | HPE1120 | HP Office Recycled Paper - A size (8.5 x 11-inches) - 10 reams |
Paper | HPU1132 | HP Premium Choice LaserJet Paper - A size (8.5 x 11-inches) - 500 sheets |
Paper | HPU1732 | HP Premium Choice LaserJet Paper - Tabloid size (11 x 17-inches) - 250 sheets per package |
Paper | HPP1122 | HP Printing Paper - A size (8.5 x 11-inches) - 500 sheets |
Paper | Q1298A | LaserJet Satin Finish Tough Paper - A size (8.5 x 11-inches) - Will not tear and will withstand outdoor weather conditions - Can print on both sides |
Paper (Glossy) | Q6541A | HP Color Laser Soft-gloss Presentation Paper - A size (8.5 x 11-inches) - 200 sheets |
Paper (Glossy) | C4179B | Soft gloss color LaserJet paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package |
Paper (Matte) | Q6543A | HP Color Laser Matte Brochure Paper - A size (8.5 x 11-inches) - 150 sheets |
Paper (Matte) | Q6549A | HP Photo And Imaging Laser Paper - Matte finish on both sides, 96 brightness - A size (8.5 x 11-inches) - 100 sheets |
Paper (Satin) | Q1298B | HP LaserJet Tough Paper - A4 size (21.0cm x 29.7cm) |
PC Board | RM1-3730-060CN | Engine controller PC board assembly and metal pan - For 110VAC to 127VAC operation |
PC Board | RM1-3731-060CN | Engine controller PC board assembly and metal pan - For 220 VAC to 240 VAC operation |
PC Board | Q7848-61006 | Formatter (main logic) board - For HP Laserjet P3005n, P3005dn, and P3005x series only - Version 02.041.0 |
PC Board | Q7847-61006 | Formatter (main logic) PC board - For HP Laserjet P3005, and P3005d series only - Version 02.041.0 |
Pickup Assembly | 5851-4012 | Paper pick-up assembly - Includes the pick-up roller, feed roller assembly, drive gears, and separation pad for tray 2 and 3 |
Pickup Assembly | 5851-4013 | Paper pick-up roller assembly - For tray cassette 2 and 3 - Include separation pad for tray 2 and 3 |
Plate | RC2-0628-000CN | Anti-magnetic plate - Located on the formatter cover |
Plate | RM1-3727-000CN | Bottom support plate for the roller assembly |
Plate | RC2-0697-000CN | Face-up shield plate |
Plate | RC2-0649-000CN | Fuser film drive side plate - Located on the fuser assembly |
Plate | RC2-0639-000CN | I/O face plate - Mounts on the formatter board cover (network models) |
Plate | RC2-0638-000CN | I/O face plate - Mounts on the formatter board cover (non-network models) |
Plate | RC2-0623-000CN | Left plate fan shield - Holds the left side fan (FM2) |
Plate | RC1-4136-000CN | Protective plate |
Power Supply | RM1-3758-000CN | High voltage power supply PC board assembly |
Printer | Q7816-69055 | HP LaserJet P3005X - Whole unit replacement - For 220VAC |
Retainer | XD9-0232-000CN | Retaining ring (E-type) |
Rod | RC2-0593-000CN | Fan rod - Metal rod that mounts against fan (FM1) on right side of printer - Used for noise reduction |
Roller | RM1-1497-000CN | Delivery roller assembly - Lower face-down output roller assembly - Includes roller and holder Four used |
Roller | RC1-3994-000CN | Face down roller - Small individual feed roller that rides against face down shaft roller - Held by torsion spring - Four used |
Roller | RM1-3749-000CN | Face-down output roller assembly - Black roller shaft with four soft rollers |
Roller | RL1-1370-000CN | Paper pickup roller - Picks up media from the paper input tray |
Roller | RL1-0568-000CN | Tray 1/MP tray pickup roller - D-shaped replacement pickup roller |
Roller Assembly | RM1-3716-000CN | Multi-purpose tray pickup roller assembly - Includes pickup roller, roller cam, right and left cams, both round rollers and dowel pin |
Roller Assembly | RM1-3715-000CN | Registration roller assembly |
Roller Assembly | RM1-1485-000CN | Roller assembly - Black plastic housing that holds rollers in front of tray 2 pickup roller assembly |
Roller Assembly | RM1-1508-000CN | Transfer roller assembly - Long metal shaft with black roller - Includes right side bushing and tension spring |
Screw | XA9-1503-000CN | M3 truss head (Flanged) phillips screw (Black oxide finish) - 6mm long |
Screw | XA9-1420-000CN | M3 X 8mm pan head phillips screw with captive flat and split-lock washers |
Screw | XB4-7401-005CN | M4 pan-head phillips screw with self-tapping threads - 10mm long |
Screw | XB2-7300-605CN | Machine screw with attached washer - M3, 6mm - Used to hold plastic to metal |
Screw | XA9-1671-000CN | Screw - M3 X 8mm long |
Sensor | WG8-5645-000CN | Flag activated photo-sensor - Photo sensor - Paper sensor PS1305 |
Sensor | RM1-4041-000CN | Multipurpose paper tray sensor - Printed circuit assembly (PCA) - Includes paper sensors (PS3) |
Sensor | RM1-3799-000CN | Paper sensor assembly - Paper present sensing |
Sensor | RM1-4042-000CN | Paper width sensor - Printed circuit board (PCB) assembly |
Sensor | WG8-5624-000CN | Photo-sensor (TLP1241) - Sensor flag activated |
Sensor | RM1-4065-000CN | Printed circuit board (PCB) sensor assembly |
Sensor | RM1-4040-000CN | Top sensor printed circuit board (PCB) assembly (PS-901) - Top of page sensor, detects pick, delivery and stationary |
Solenoid | RK2-1490-000CN | Solenoid (SL1) - For tray 1 - Mounts on the main drive assembly |
Solenoid | RK2-1492-000CN | Solenoid (SL2) - For tray 2 - Mounts on the main drive assembly |
Solenoid | RC2-0498-000CN | Solenoid Mount |
Spring | RC2-0483-000CN | Compression spring |
Spring | RU5-2920-000CN | Compression spring - Goes on the pendulum assembly |
Spring | RU5-2405-000CN | Compression spring - Provides pressure for E-reader holder |
Spring | RU5-2401-000CN | Compression spring - Provides pressure for the large 201-tooth white gear on right side of printer |
Spring | RU5-2385-000CN | Compression spring - Provides pressure for tray 1 seperation pad |
Spring | RC1-4140-000CN | Compression spring - Provides pressure to grounding contact link on left side of cartridge guide - Pushes link arm away when cartridge is removed |
Spring | RU5-2408-000CN | Compression spring - Right side transfer roller spring - Provides tension for transfer roller |
Spring | RU5-2404-000CN | Compression spring - Spring provides pressure to the laser shutter which when pulled back (spring is compressed) enables the laser scanner shutter by pressing up the plastic mechanical link on the underside of the laser/scanner assembly |
Spring | RC1-4067-000CN | Leaf spring - Leaf spring that provides electrical connection to left side of toner cartridge |
Spring | RU5-2407-000CN | Tension spring - Provides tension for cartridge access door arm |
Spring | RU5-2403-000CN | Tension spring - Provides tension for cartridge clamp lever that holds lefts side of cartridge in a stable position when inserted |
Spring | RU5-2388-000CN | Tension spring - Provides tension for white plastic arm on left side of cartridge access door |
Spring | RU5-2410-020CN | Torsion spring - Provides pressure to move protective plate back into cartridge compartment when the cartridge is removed |
Spring | RC1-4028-000CN | Torsion spring - Provides tension for top of page sensor flag |
Spring | RU5-2386-000CN | Torsion spring - Provides tension for tray 1 paper sensor flag |
Spring | RC2-0576-000CN | Torsion spring - Provides tension to the arm paper |
Spring | RC2-0665-000CN | Torsion spring - Tiny spring that attaches the face down roller |
Spring | RC1-4061-000CN | Torsion spring - Tiny spring that attaches to small metal U-shaped cartridge grounding contact - Front cartridge contact spring |
Spring | RC1-4059-000CN | Torsion spring - Tiny spring that attaches to small metal U-shaped cartridge grounding contact - Rear cartridge contact spring |
Static Dissipater | RC1-4070-000CN | Sheet static charge - Dissipates static charge from paper |
Static Dissipater | RC1-4069-000CN | Sheet static charge - Goes on the lower transfer guide assembly - Dissipates static charge from paper |
Static Dissipater | RC1-4025-000CN | Static charge eliminator - Comb that mounts above upper delivery roller that dissipates static charge as paper exits printer |
Stop | RC2-0657-000CN | Fuser thrust stopper - Located on the fuser drive assembly |
Stop | RC2-0707-000CN | Left cartridge stopper - Provided a predetermined position for the cartridge |
Stop | RC2-0585-000CN | Left wing feed guide stopper |
Stop | RC2-0702-000CN | Right cartridge stopper - Provided a predetermined position for the cartridge |
Switch | RK2-0534-000CN | Microswitch - Door open switch (SW501) |
Tray | RM1-3732-000CN | 500-sheet input tray - Paper cassette for tray 2 |
Tray | RM1-3796-000CN | 500-sheet input tray - Paper cassette for tray 3 |
Tray Assembly | Q7817A | HP LaserJet 500-sheet Paper Input Tray |
Tray Assembly | RM1-1490-000CN | MP/Tray 1 support assembly - Hinged support and adjustable paper width guide assembly - Tray 1 cover assembly attaches to this assembly |
Tray Assembly | Q7817-67901 | Optional 500-sheet paper input tray feeder assembly - Includes the paper feeder base assembly and 500-sheet paper cassette tray 3 - Holds Letter, A4, Legal, A5, B5 (JIS), Executive, and 8.5 x 13 paper sizes |
Washer | RC2-0652-000CN | Plain Washer - Located on the pendulum assembly |