This is a 3m 62.5 micron fiber optic mode conditioning patch cable. This cable is a duplex multi-mode cable with a short segment of single mode fiber at the transmitting end. Specifically it includes a 1 x MTRJ duplex 62.5/125 micron to 1 x LC 62.5/125 & 1 x LC 9/125 micron cable. The mode conditioning patch cable uses an offset splicing coupler coupling the single mode fiber to the multi-mode section of the cable. The offset occurs from the center of the multi-mode fiber. Fiber mode patch cables are to be used with LX or longwave gigabit Ethernet transceivers that use both SM and MM fibers. With normal multi-mode patch cables the transceivers can generate multiple signals causing differential mode delay (DMD) severely limiting transmission distances. Such fiber mode conditioning cables remove these multiple signals eliminating problems at the receiver end. These cables are recommended for multi-mode cable runs greater than 50 feet.
Specification:
Network Cable Type: Mode conditioning cable - IEEE 802.3z/OM1/OS1
Technology: Fiber optic
Jacket Material: Low Smoke Zero Halogen (LSZH)
Fiber Qty: 2
Core / Cladding Diameter: 9 / 62.5 /125 micron
Features: Halogen-free
Length: 10 ft
Color: Orange
Connectors: 2 x MT-RJ/UPC multi-mode - male
Connectors (Second End): LC/UPC multi-mode - male
Specification:
Network Cable Type: Mode conditioning cable - IEEE 802.3z/OM1/OS1
Technology: Fiber optic
Jacket Material: Low Smoke Zero Halogen (LSZH)
Fiber Qty: 2
Core / Cladding Diameter: 9 / 62.5 /125 micron
Features: Halogen-free
Length: 10 ft
Color: Orange
Connectors: 2 x MT-RJ/UPC multi-mode - male
Connectors (Second End): LC/UPC multi-mode - male
Accessories and Cables
Accessories
Appliances
Audio & Video
Computer Components
Digital Cameras & Peripherals
Gaming
Home Environment
Monitor & Projector
Network Hardware
Office Machines and Supplies
Power Equipment
Security
Service & Support
TV & Video
